Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932088AbaKRTgz (ORCPT ); Tue, 18 Nov 2014 14:36:55 -0500 Received: from mail-wg0-f47.google.com ([74.125.82.47]:61481 "EHLO mail-wg0-f47.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754023AbaKRTgx (ORCPT ); Tue, 18 Nov 2014 14:36:53 -0500 Message-ID: <546B9FD1.6040801@gmail.com> Date: Tue, 18 Nov 2014 20:36:49 +0100 From: Sebastian Hesselbarth User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 To: Antoine Tenart , Peter.Chen@freescale.com, balbi@ti.com, p.zabel@pengutronix.de CC: alexandre.belloni@free-electrons.com, thomas.petazzoni@free-electrons.com, zmxu@marvell.com, jszhang@marvell.com, michal.simek@xilinx.com, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v8 10/13] ARM: dts: berlin: add BG2Q nodes for USB support References: <1416231347-27193-1-git-send-email-antoine.tenart@free-electrons.com> <1416231347-27193-11-git-send-email-antoine.tenart@free-electrons.com> In-Reply-To: <1416231347-27193-11-git-send-email-antoine.tenart@free-electrons.com> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 17.11.2014 14:35, Antoine Tenart wrote: > Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q > SoC has 3 USB host controller, compatible with ChipIdea. > > Signed-off-by: Antoine Tenart Applied to berlin/dt with the whitespace removed that Sergei pointed out. Thanks! > --- > arch/arm/boot/dts/berlin2q.dtsi | 55 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > > diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi > index 2de8d6f8973c..834142bdfbb1 100644 > --- a/arch/arm/boot/dts/berlin2q.dtsi > +++ b/arch/arm/boot/dts/berlin2q.dtsi > @@ -114,6 +114,40 @@ > #interrupt-cells = <3>; > }; > > + usb_phy2: phy@a2f400 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xa2f400 0x128>; > + #phy-cells = <0>; > + resets = <&chip 0x104 14>; > + status = "disabled"; > + }; > + > + usb2: usb@a30000 { > + compatible = "chipidea,usb2"; > + reg = <0xa30000 0x10000>; > + interrupts = ; > + clocks = <&chip CLKID_USB2>; > + phys = <&usb_phy2>; > + phy-names = "usb-phy"; > + status = "disabled"; > + }; > + > + usb_phy0: phy@b74000 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xb74000 0x128>; > + #phy-cells = <0>; > + resets = <&chip 0x104 12>; > + status = "disabled"; > + }; > + > + usb_phy1: phy@b78000 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xb78000 0x128>; > + #phy-cells = <0>; > + resets = <&chip 0x104 13>; > + status = "disabled"; > + }; > + > eth0: ethernet@b90000 { > compatible = "marvell,pxa168-eth"; > reg = <0xb90000 0x10000>; > @@ -365,6 +399,26 @@ > }; > }; > > + usb0: usb@ed0000 { > + compatible = "chipidea,usb2"; > + reg = <0xed0000 0x10000>; > + interrupts = ; > + clocks = <&chip CLKID_USB0>; > + phys = <&usb_phy0>; > + phy-names = "usb-phy"; > + status = "disabled"; > + }; > + > + usb1: usb@ee0000 { > + compatible = "chipidea,usb2"; > + reg = <0xee0000 0x10000>; > + interrupts = ; > + clocks = <&chip CLKID_USB1>; > + phys = <&usb_phy1>; > + phy-names = "usb-phy"; > + status = "disabled"; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -457,5 +511,6 @@ > interrupts = ; > }; > }; > + > }; > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/