Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933229AbaKSAFS (ORCPT ); Tue, 18 Nov 2014 19:05:18 -0500 Received: from mail-ie0-f180.google.com ([209.85.223.180]:43698 "EHLO mail-ie0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932669AbaKSAFP (ORCPT ); Tue, 18 Nov 2014 19:05:15 -0500 MIME-Version: 1.0 In-Reply-To: <546BDB3D.8050602@ti.com> References: <1416321805-17788-1-git-send-email-dmurphy@ti.com> <546BDB3D.8050602@ti.com> From: Bryan Wu Date: Tue, 18 Nov 2014 16:04:54 -0800 Message-ID: Subject: Re: [PATCH v2] leds: lp8860: Introduce TI lp8860 4 channel LED driver To: Dan Murphy Cc: lkml , Linux LED Subsystem , "devicetree@vger.kernel.org" , "rpurdie@rpsys.net" Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Nov 18, 2014 at 3:50 PM, Dan Murphy wrote: > Bryan > > On 11/18/2014 04:56 PM, Bryan Wu wrote: >> On Tue, Nov 18, 2014 at 6:43 AM, Dan Murphy wrote: >>> Introduce the Texas Instruments lp8860 >>> 4 channel LED driver. >>> >>> This driver configures the device in display cluster mode >>> as this seems to be the most used configuration at the >>> time of the driver configuration. >>> >>> For more product information please see the link below: >>> http://www.ti.com/product/lp8860-q1 >>> >>> Signed-off-by: Dan Murphy >>> --- >>> >>> v2 - Fixed commit message spelling, changed flush_work to >>> cancel_work, did not move INIT_WORK as led class is not registered >>> until the end of probe - https://patchwork.kernel.org/patch/5296361 >>> >> Thanks for updating, I applied this patch into my tree. > > Thank you. Apparently the zero day build found an issue. > > Do you want me to fix it? I see a patch already to fix that issue though. > > Just let me know I am good either way > Yeah, I saw that. 0day is awesome to catch those issues. I think you can provide a V3 patch and I will use V3 to replace the old V2 patch and push out again. Thanks, -Bryan >> -Bryan >> >>> .../devicetree/bindings/leds/leds-lp8860.txt | 29 ++ >>> drivers/leds/Kconfig | 10 + >>> drivers/leds/Makefile | 1 + >>> drivers/leds/leds-lp8860.c | 491 +++++++++++++++++++++ >>> 4 files changed, 531 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/leds/leds-lp8860.txt >>> create mode 100644 drivers/leds/leds-lp8860.c >>> >>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt >>> new file mode 100644 >>> index 0000000..aad38dd >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt >>> @@ -0,0 +1,29 @@ >>> +* Texas Instruments - lp8860 4-Channel LED Driver >>> + >>> +The LP8860-Q1 is an high-efficiency LED >>> +driver with boost controller. It has 4 high-precision >>> +current sinks that can be controlled by a PWM input >>> +signal, a SPI/I2C master, or both. >>> + >>> +Required properties: >>> + - compatible: >>> + "ti,lp8860" >>> + - reg - I2C slave address >>> + - label - Used for naming LEDs >>> + >>> +Optional properties: >>> + - enable-gpio - gpio pin to enable/disable the device. >>> + - supply - "vled" - LED supply >>> + >>> +Example: >>> + >>> +leds: leds@6 { >>> + compatible = "ti,lp8860"; >>> + reg = <0x2d>; >>> + label = "display_cluster"; >>> + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; >>> + vled-supply = <&vbatt>; >>> +} >>> + >>> +For more product information please see the link below: >>> +http://www.ti.com/product/lp8860-q1 >>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >>> index a210338..b0dce59 100644 >>> --- a/drivers/leds/Kconfig >>> +++ b/drivers/leds/Kconfig >>> @@ -250,6 +250,16 @@ config LEDS_LP8788 >>> help >>> This option enables support for the Keyboard LEDs on the LP8788 PMIC. >>> >>> +config LEDS_LP8860 >>> + tristate "LED support for the TI LP8860 4 channel LED driver" >>> + depends on LEDS_CLASS && REGMAP_I2C >>> + help >>> + If you say yes here you get support for the TI LP8860 4 channel >>> + LED driver. >>> + This option enables support for the display cluster LEDs >>> + on the LP8860 4 channel LED driver using the I2C communication >>> + bus. >>> + >>> config LEDS_CLEVO_MAIL >>> tristate "Mail LED on Clevo notebook" >>> depends on LEDS_CLASS >>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile >>> index a2b1647..1c65a19 100644 >>> --- a/drivers/leds/Makefile >>> +++ b/drivers/leds/Makefile >>> @@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o >>> obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o >>> obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o >>> obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o >>> +obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o >>> obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o >>> obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o >>> obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o >>> diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c >>> new file mode 100644 >>> index 0000000..54e4eec >>> --- /dev/null >>> +++ b/drivers/leds/leds-lp8860.c >>> @@ -0,0 +1,491 @@ >>> +/* >>> + * TI LP8860 4-Channel LED Driver >>> + * >>> + * Copyright (C) 2014 Texas Instruments >>> + * >>> + * Author: Dan Murphy >>> + * >>> + * This program is free software; you can redistribute it and/or >>> + * modify it under the terms of the GNU General Public License >>> + * version 2 as published by the Free Software Foundation. >>> + * >>> + */ >>> + >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> + >>> +#define LP8860_DISP_CL1_BRT_MSB 0x00 >>> +#define LP8860_DISP_CL1_BRT_LSB 0x01 >>> +#define LP8860_DISP_CL1_CURR_MSB 0x02 >>> +#define LP8860_DISP_CL1_CURR_LSB 0x03 >>> +#define LP8860_CL2_BRT_MSB 0x04 >>> +#define LP8860_CL2_BRT_LSB 0x05 >>> +#define LP8860_CL2_CURRENT 0x06 >>> +#define LP8860_CL3_BRT_MSB 0x07 >>> +#define LP8860_CL3_BRT_LSB 0x08 >>> +#define LP8860_CL3_CURRENT 0x09 >>> +#define LP8860_CL4_BRT_MSB 0x0a >>> +#define LP8860_CL4_BRT_LSB 0x0b >>> +#define LP8860_CL4_CURRENT 0x0c >>> +#define LP8860_CONFIG 0x0d >>> +#define LP8860_STATUS 0x0e >>> +#define LP8860_FAULT 0x0f >>> +#define LP8860_LED_FAULT 0x10 >>> +#define LP8860_FAULT_CLEAR 0x11 >>> +#define LP8860_ID 0x12 >>> +#define LP8860_TEMP_MSB 0x13 >>> +#define LP8860_TEMP_LSB 0x14 >>> +#define LP8860_DISP_LED_CURR_MSB 0x15 >>> +#define LP8860_DISP_LED_CURR_LSB 0x16 >>> +#define LP8860_DISP_LED_PWM_MSB 0x17 >>> +#define LP8860_DISP_LED_PWM_LSB 0x18 >>> +#define LP8860_EEPROM_CNTRL 0x19 >>> +#define LP8860_EEPROM_UNLOCK 0x1a >>> + >>> +#define LP8860_EEPROM_REG_0 0x60 >>> +#define LP8860_EEPROM_REG_1 0x61 >>> +#define LP8860_EEPROM_REG_2 0x62 >>> +#define LP8860_EEPROM_REG_3 0x63 >>> +#define LP8860_EEPROM_REG_4 0x64 >>> +#define LP8860_EEPROM_REG_5 0x65 >>> +#define LP8860_EEPROM_REG_6 0x66 >>> +#define LP8860_EEPROM_REG_7 0x67 >>> +#define LP8860_EEPROM_REG_8 0x68 >>> +#define LP8860_EEPROM_REG_9 0x69 >>> +#define LP8860_EEPROM_REG_10 0x6a >>> +#define LP8860_EEPROM_REG_11 0x6b >>> +#define LP8860_EEPROM_REG_12 0x6c >>> +#define LP8860_EEPROM_REG_13 0x6d >>> +#define LP8860_EEPROM_REG_14 0x6e >>> +#define LP8860_EEPROM_REG_15 0x6f >>> +#define LP8860_EEPROM_REG_16 0x70 >>> +#define LP8860_EEPROM_REG_17 0x71 >>> +#define LP8860_EEPROM_REG_18 0x72 >>> +#define LP8860_EEPROM_REG_19 0x73 >>> +#define LP8860_EEPROM_REG_20 0x74 >>> +#define LP8860_EEPROM_REG_21 0x75 >>> +#define LP8860_EEPROM_REG_22 0x76 >>> +#define LP8860_EEPROM_REG_23 0x77 >>> +#define LP8860_EEPROM_REG_24 0x78 >>> + >>> +#define LP8860_LOCK_EEPROM 0x00 >>> +#define LP8860_UNLOCK_EEPROM 0x01 >>> +#define LP8860_PROGRAM_EEPROM 0x02 >>> +#define LP8860_EEPROM_CODE_1 0x08 >>> +#define LP8860_EEPROM_CODE_2 0xba >>> +#define LP8860_EEPROM_CODE_3 0xef >>> + >>> +#define LP8860_CLEAR_FAULTS 0x01 >>> + >>> +#define LP8860_DISP_LED_NAME "display_cluster" >>> + >>> +/** >>> + * struct lp8860_led - >>> + * @lock - Lock for reading/writing the device >>> + * @work - Work item used to off load the brightness register writes >>> + * @client - Pointer to the I2C client >>> + * @led_dev - led class device pointer >>> + * @regmap - Devices register map >>> + * @eeprom_regmap - EEPROM register map >>> + * @enable_gpio - VDDIO/EN gpio to enable communication interface >>> + * @regulator - LED supply regulator pointer >>> + * @brightness - Current brightness value requested >>> + * @label - LED label >>> +**/ >>> +struct lp8860_led { >>> + struct mutex lock; >>> + struct work_struct work; >>> + struct i2c_client *client; >>> + struct led_classdev led_dev; >>> + struct regmap *regmap; >>> + struct regmap *eeprom_regmap; >>> + struct gpio_desc *enable_gpio; >>> + struct regulator *regulator; >>> + enum led_brightness brightness; >>> + const char *label; >>> +}; >>> + >>> +struct lp8860_eeprom_reg { >>> + uint8_t reg; >>> + uint8_t value; >>> +}; >>> + >>> +struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = { >>> + { LP8860_EEPROM_REG_0, 0xed }, >>> + { LP8860_EEPROM_REG_1, 0xdf }, >>> + { LP8860_EEPROM_REG_2, 0xdc }, >>> + { LP8860_EEPROM_REG_3, 0xf0 }, >>> + { LP8860_EEPROM_REG_4, 0xdf }, >>> + { LP8860_EEPROM_REG_5, 0xe5 }, >>> + { LP8860_EEPROM_REG_6, 0xf2 }, >>> + { LP8860_EEPROM_REG_7, 0x77 }, >>> + { LP8860_EEPROM_REG_8, 0x77 }, >>> + { LP8860_EEPROM_REG_9, 0x71 }, >>> + { LP8860_EEPROM_REG_10, 0x3f }, >>> + { LP8860_EEPROM_REG_11, 0xb7 }, >>> + { LP8860_EEPROM_REG_12, 0x17 }, >>> + { LP8860_EEPROM_REG_13, 0xef }, >>> + { LP8860_EEPROM_REG_14, 0xb0 }, >>> + { LP8860_EEPROM_REG_15, 0x87 }, >>> + { LP8860_EEPROM_REG_16, 0xce }, >>> + { LP8860_EEPROM_REG_17, 0x72 }, >>> + { LP8860_EEPROM_REG_18, 0xe5 }, >>> + { LP8860_EEPROM_REG_19, 0xdf }, >>> + { LP8860_EEPROM_REG_20, 0x35 }, >>> + { LP8860_EEPROM_REG_21, 0x06 }, >>> + { LP8860_EEPROM_REG_22, 0xdc }, >>> + { LP8860_EEPROM_REG_23, 0x88 }, >>> + { LP8860_EEPROM_REG_24, 0x3E }, >>> +}; >>> + >>> +static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock) >>> +{ >>> + int ret; >>> + >>> + mutex_lock(&led->lock); >>> + >>> + if (lock == LP8860_UNLOCK_EEPROM) { >>> + ret = regmap_write(led->regmap, >>> + LP8860_EEPROM_UNLOCK, >>> + LP8860_EEPROM_CODE_1); >>> + if (ret) { >>> + dev_err(&led->client->dev, "EEPROM Unlock failed\n"); >>> + goto out; >>> + } >>> + >>> + ret = regmap_write(led->regmap, >>> + LP8860_EEPROM_UNLOCK, >>> + LP8860_EEPROM_CODE_2); >>> + if (ret) { >>> + dev_err(&led->client->dev, "EEPROM Unlock failed\n"); >>> + goto out; >>> + } >>> + ret = regmap_write(led->regmap, >>> + LP8860_EEPROM_UNLOCK, >>> + LP8860_EEPROM_CODE_3); >>> + if (ret) { >>> + dev_err(&led->client->dev, "EEPROM Unlock failed\n"); >>> + goto out; >>> + } >>> + } else { >>> + ret = regmap_write(led->regmap, >>> + LP8860_EEPROM_UNLOCK, >>> + LP8860_LOCK_EEPROM); >>> + } >>> + >>> +out: >>> + mutex_unlock(&led->lock); >>> + return ret; >>> +} >>> + >>> +static int lp8860_fault_check(struct lp8860_led *led) >>> +{ >>> + int ret, fault; >>> + unsigned int read_buf; >>> + >>> + ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf); >>> + if (ret) >>> + goto out; >>> + >>> + fault = read_buf; >>> + >>> + ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf); >>> + if (ret) >>> + goto out; >>> + >>> + fault |= read_buf; >>> + >>> + /* Attempt to clear any faults */ >>> + if (fault) >>> + ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR, >>> + LP8860_CLEAR_FAULTS); >>> +out: >>> + return ret; >>> +} >>> + >>> +static void lp8860_led_brightness_work(struct work_struct *work) >>> +{ >>> + struct lp8860_led *led = container_of(work, struct lp8860_led, work); >>> + int ret; >>> + int disp_brightness = led->brightness * 255; >>> + >>> + mutex_lock(&led->lock); >>> + >>> + ret = lp8860_fault_check(led); >>> + if (ret) { >>> + dev_err(&led->client->dev, "Cannot read/clear faults\n"); >>> + goto out; >>> + } >>> + >>> + ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB, >>> + (disp_brightness & 0xff00) >> 8); >>> + if (ret) { >>> + dev_err(&led->client->dev, "Cannot write CL1 MSB\n"); >>> + goto out; >>> + } >>> + >>> + ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB, >>> + disp_brightness & 0xff); >>> + if (ret) { >>> + dev_err(&led->client->dev, "Cannot write CL1 LSB\n"); >>> + goto out; >>> + } >>> +out: >>> + mutex_unlock(&led->lock); >>> +} >>> + >>> +static void lp8860_brightness_set(struct led_classdev *led_cdev, >>> + enum led_brightness brt_val) >>> +{ >>> + struct lp8860_led *led = >>> + container_of(led_cdev, struct lp8860_led, led_dev); >>> + >>> + led->brightness = brt_val; >>> + schedule_work(&led->work); >>> +} >>> + >>> +static int lp8860_init(struct lp8860_led *led) >>> +{ >>> + unsigned int read_buf; >>> + int ret, i, reg_count; >>> + >>> + if (led->enable_gpio) >>> + gpiod_direction_output(led->enable_gpio, 1); >>> + >>> + ret = lp8860_fault_check(led); >>> + if (ret) >>> + goto out; >>> + >>> + ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf); >>> + if (ret) >>> + goto out; >>> + >>> + ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM); >>> + if (ret) { >>> + dev_err(&led->client->dev, "Failed unlocking EEPROM\n"); >>> + goto out; >>> + } >>> + >>> + reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]); >>> + for (i = 0; i < reg_count; i++) { >>> + ret = regmap_write(led->eeprom_regmap, >>> + lp8860_eeprom_disp_regs[i].reg, >>> + lp8860_eeprom_disp_regs[i].value); >>> + if (ret) { >>> + dev_err(&led->client->dev, "Failed writing EEPROM\n"); >>> + goto out; >>> + } >>> + } >>> + >>> + ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM); >>> + if (ret) >>> + goto out; >>> + >>> + ret = regmap_write(led->regmap, >>> + LP8860_EEPROM_CNTRL, >>> + LP8860_PROGRAM_EEPROM); >>> + if (ret) >>> + dev_err(&led->client->dev, "Failed programming EEPROM\n"); >>> +out: >>> + if (ret) >>> + if (led->enable_gpio) >>> + gpiod_direction_output(led->enable_gpio, 0); >>> + return ret; >>> +} >>> + >>> +static struct reg_default lp8860_reg_defs[] = { >>> + { LP8860_DISP_CL1_BRT_MSB, 0x00}, >>> + { LP8860_DISP_CL1_BRT_LSB, 0x00}, >>> + { LP8860_DISP_CL1_CURR_MSB, 0x00}, >>> + { LP8860_DISP_CL1_CURR_LSB, 0x00}, >>> + { LP8860_CL2_BRT_MSB, 0x00}, >>> + { LP8860_CL2_BRT_LSB, 0x00}, >>> + { LP8860_CL2_CURRENT, 0x00}, >>> + { LP8860_CL3_BRT_MSB, 0x00}, >>> + { LP8860_CL3_BRT_LSB, 0x00}, >>> + { LP8860_CL3_CURRENT, 0x00}, >>> + { LP8860_CL4_BRT_MSB, 0x00}, >>> + { LP8860_CL4_BRT_LSB, 0x00}, >>> + { LP8860_CL4_CURRENT, 0x00}, >>> + { LP8860_CONFIG, 0x00}, >>> + { LP8860_FAULT_CLEAR, 0x00}, >>> + { LP8860_EEPROM_CNTRL, 0x80}, >>> + { LP8860_EEPROM_UNLOCK, 0x00}, >>> +}; >>> + >>> +static const struct regmap_config lp8860_regmap_config = { >>> + .reg_bits = 8, >>> + .val_bits = 8, >>> + >>> + .max_register = LP8860_EEPROM_UNLOCK, >>> + .reg_defaults = lp8860_reg_defs, >>> + .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs), >>> + .cache_type = REGCACHE_NONE, >>> +}; >>> + >>> +static struct reg_default lp8860_eeprom_defs[] = { >>> + { LP8860_EEPROM_REG_0, 0x00 }, >>> + { LP8860_EEPROM_REG_1, 0x00 }, >>> + { LP8860_EEPROM_REG_2, 0x00 }, >>> + { LP8860_EEPROM_REG_3, 0x00 }, >>> + { LP8860_EEPROM_REG_4, 0x00 }, >>> + { LP8860_EEPROM_REG_5, 0x00 }, >>> + { LP8860_EEPROM_REG_6, 0x00 }, >>> + { LP8860_EEPROM_REG_7, 0x00 }, >>> + { LP8860_EEPROM_REG_8, 0x00 }, >>> + { LP8860_EEPROM_REG_9, 0x00 }, >>> + { LP8860_EEPROM_REG_10, 0x00 }, >>> + { LP8860_EEPROM_REG_11, 0x00 }, >>> + { LP8860_EEPROM_REG_12, 0x00 }, >>> + { LP8860_EEPROM_REG_13, 0x00 }, >>> + { LP8860_EEPROM_REG_14, 0x00 }, >>> + { LP8860_EEPROM_REG_15, 0x00 }, >>> + { LP8860_EEPROM_REG_16, 0x00 }, >>> + { LP8860_EEPROM_REG_17, 0x00 }, >>> + { LP8860_EEPROM_REG_18, 0x00 }, >>> + { LP8860_EEPROM_REG_19, 0x00 }, >>> + { LP8860_EEPROM_REG_20, 0x00 }, >>> + { LP8860_EEPROM_REG_21, 0x00 }, >>> + { LP8860_EEPROM_REG_22, 0x00 }, >>> + { LP8860_EEPROM_REG_23, 0x00 }, >>> + { LP8860_EEPROM_REG_24, 0x00 }, >>> +}; >>> + >>> +static const struct regmap_config lp8860_eeprom_regmap_config = { >>> + .reg_bits = 8, >>> + .val_bits = 8, >>> + >>> + .max_register = LP8860_EEPROM_REG_24, >>> + .reg_defaults = lp8860_eeprom_defs, >>> + .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs), >>> + .cache_type = REGCACHE_NONE, >>> +}; >>> + >>> +static int lp8860_probe(struct i2c_client *client, >>> + const struct i2c_device_id *id) >>> +{ >>> + int ret; >>> + struct lp8860_led *led; >>> + struct device_node *np = client->dev.of_node; >>> + >>> + led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); >>> + if (!led) >>> + return -ENOMEM; >>> + >>> + led->label = LP8860_DISP_LED_NAME; >>> + >>> + if (client->dev.of_node) { >>> + ret = of_property_read_string(np, "label", &led->label); >>> + if (ret) { >>> + dev_err(&client->dev, "Missing label in dt\n"); >>> + return -EINVAL; >>> + } >>> + } >>> + >>> + led->enable_gpio = devm_gpiod_get(&client->dev, "enable"); >>> + if (IS_ERR(led->enable_gpio)) >>> + led->enable_gpio = NULL; >>> + else >>> + gpiod_direction_output(led->enable_gpio, 0); >>> + >>> + led->regulator = devm_regulator_get(&client->dev, "vled"); >>> + if (IS_ERR(led->regulator)) >>> + led->regulator = NULL; >>> + >>> + led->client = client; >>> + led->led_dev.name = led->label; >>> + led->led_dev.max_brightness = LED_FULL; >>> + led->led_dev.brightness_set = lp8860_brightness_set; >>> + >>> + mutex_init(&led->lock); >>> + INIT_WORK(&led->work, lp8860_led_brightness_work); >>> + >>> + i2c_set_clientdata(client, led); >>> + >>> + led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config); >>> + if (IS_ERR(led->regmap)) { >>> + ret = PTR_ERR(led->regmap); >>> + dev_err(&client->dev, "Failed to allocate register map: %d\n", >>> + ret); >>> + return ret; >>> + } >>> + >>> + led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config); >>> + if (IS_ERR(led->eeprom_regmap)) { >>> + ret = PTR_ERR(led->eeprom_regmap); >>> + dev_err(&client->dev, "Failed to allocate register map: %d\n", >>> + ret); >>> + return ret; >>> + } >>> + >>> + ret = lp8860_init(led); >>> + if (ret) >>> + return ret; >>> + >>> + ret = led_classdev_register(&client->dev, &led->led_dev); >>> + if (ret) { >>> + dev_err(&client->dev, "led register err: %d\n", ret); >>> + return ret; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static int lp8860_remove(struct i2c_client *client) >>> +{ >>> + struct lp8860_led *led = i2c_get_clientdata(client); >>> + int ret; >>> + >>> + led_classdev_unregister(&led->led_dev); >>> + cancel_work_sync(&led->work); >>> + >>> + if (led->enable_gpio) >>> + gpiod_direction_output(led->enable_gpio, 0); >>> + >>> + if (led->regulator) { >>> + ret = regulator_disable(led->regulator); >>> + if (ret) >>> + dev_err(&led->client->dev, >>> + "Failed to disable regulator\n"); >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static const struct i2c_device_id lp8860_id[] = { >>> + { "lp8860", 0 }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(i2c, lp8860_id); >>> + >>> +#ifdef CONFIG_OF >>> +static const struct of_device_id of_lp8860_leds_match[] = { >>> + { .compatible = "ti,lp8860", }, >>> + {}, >>> +}; >>> +MODULE_DEVICE_TABLE(of, of_lp8860_leds_match); >>> +#endif >>> + >>> +static struct i2c_driver lp8860_driver = { >>> + .driver = { >>> + .name = "lp8860", >>> + .of_match_table = of_match_ptr(of_lp8860_leds_match), >>> + }, >>> + .probe = lp8860_probe, >>> + .remove = lp8860_remove, >>> + .id_table = lp8860_id, >>> +}; >>> +module_i2c_driver(lp8860_driver); >>> + >>> +MODULE_DESCRIPTION("Texas Instruments LP8860 LED drvier"); >>> +MODULE_AUTHOR("Dan Murphy "); >>> +MODULE_LICENSE("GPL"); >>> -- >>> 1.9.1 >>> > > > -- > ------------------ > Dan Murphy > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/