Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757400AbaKTWyN (ORCPT ); Thu, 20 Nov 2014 17:54:13 -0500 Received: from mail-pa0-f49.google.com ([209.85.220.49]:34332 "EHLO mail-pa0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757222AbaKTWyI (ORCPT ); Thu, 20 Nov 2014 17:54:08 -0500 Message-ID: <546E7120.5080505@gmail.com> Date: Thu, 20 Nov 2014 14:54:24 -0800 From: Rajat Jain User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130803 Thunderbird/17.0.8 MIME-Version: 1.0 To: Bjorn Helgaas , linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org CC: Rajat Jain , Guenter Roeck , Rajat Jain Subject: [PATCH v2] PCI: pciehp: Check link state before accessing device during removal Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org While removing a card, we can't assume the presence to mean that the access to card is OK. That is because the cause of removal may be a link down event, and the card may still be physically present. Thus, instead of presence, use the link state to decide whether or not it is OK to access the card devices. Here are the problem symptoms: During the removal of a card due to link down, sometimes the following error is seen (because pciehp_unconfigure_device() reads 0xFF from bridge control register as the link is down, which cause it to assume that the VGA bit is set): pciehp 0000:21:05.0:pcie24: pcie_isr: intr_loc 100 pciehp 0000:21:05.0:pcie24: Data Link Layer State change pciehp 0000:21:05.0:pcie24: slot(5): Link Down event pciehp 0000:21:05.0:pcie24: Disabling domain:bus:device=0000:60:00 pciehp 0000:21:05.0:pcie24: pciehp_unconfigure_device: domain:bus:dev = 0000:60:00 pciehp 0000:21:05.0:pcie24: Cannot remove display device 0000:60:00.0 Ofcourse, when the link comes back up, the device addition fails too: pciehp 0000:21:05.0:pcie24: pcie_isr: intr_loc 100 pciehp 0000:21:05.0:pcie24: Data Link Layer State change pciehp 0000:21:05.0:pcie24: pciehp_check_link_active: lnk_status = 6011 pciehp 0000:21:05.0:pcie24: slot(5): Link Up event pciehp 0000:21:05.0:pcie24: Enabling domain:bus:device=0000:60:00 pciehp 0000:21:05.0:pcie24: pciehp_check_link_active: lnk_status = 6011 pciehp 0000:21:05.0:pcie24: pciehp_check_link_status: lnk_status = 6011 pciehp 0000:21:05.0:pcie24: Device 0000:60:00.0 already exists at 0000:60:00, cannot hot-add pciehp 0000:21:05.0:pcie24: Cannot add device at 0000:60:00 The problem is not seen with this patch applied. The device removal and insertion works as expected. Signed-off-by: Rajat Jain Signed-off-by: Rajat Jain Signed-off-by: Guenter Roeck --- v2: Use the already initialized "ctrl" instead of "p_slot->ctrl" drivers/pci/hotplug/pciehp_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 9e69403..911f85b 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -77,7 +77,7 @@ int pciehp_unconfigure_device(struct slot *p_slot) { int rc = 0; u8 bctl = 0; - u8 presence = 0; + bool link_active = false; struct pci_dev *dev, *temp; struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate; u16 command; @@ -85,7 +85,7 @@ int pciehp_unconfigure_device(struct slot *p_slot) ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n", __func__, pci_domain_nr(parent), parent->number); - pciehp_get_adapter_status(p_slot, &presence); + link_active = pciehp_check_link_active(ctrl); pci_lock_rescan_remove(); @@ -98,7 +98,7 @@ int pciehp_unconfigure_device(struct slot *p_slot) list_for_each_entry_safe_reverse(dev, temp, &parent->devices, bus_list) { pci_dev_get(dev); - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) { + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && link_active) { pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl); if (bctl & PCI_BRIDGE_CTL_VGA) { ctrl_err(ctrl, @@ -114,7 +114,7 @@ int pciehp_unconfigure_device(struct slot *p_slot) * Ensure that no new Requests will be generated from * the device. */ - if (presence) { + if (link_active) { pci_read_config_word(dev, PCI_COMMAND, &command); command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR); command |= PCI_COMMAND_INTX_DISABLE; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/