Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751930AbaKXCkw (ORCPT ); Sun, 23 Nov 2014 21:40:52 -0500 Received: from mail-pa0-f44.google.com ([209.85.220.44]:34712 "EHLO mail-pa0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750804AbaKXCkt (ORCPT ); Sun, 23 Nov 2014 21:40:49 -0500 From: Kevin Cernekee To: ralf@linux-mips.org Cc: f.fainelli@gmail.com, jfraser@broadcom.com, dtor@chromium.org, tglx@linutronix.de, jason@lakedaemon.net, jogo@openwrt.org, arnd@arndb.de, computersforpeace@gmail.com, linux-mips@linux-mips.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH V3 00/11] Multiplatform BMIPS kernel Date: Sun, 23 Nov 2014 18:40:35 -0800 Message-Id: <1416796846-28149-1-git-send-email-cernekee@gmail.com> X-Mailer: git-send-email 2.1.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch series REPLACES the following commits in Ralf's mips-for-linux-next branch: ab3e5d0647e3 Documentation: DT: Add entries for BCM3384 and its peripherals 1251d9964de5 MIPS: bcm3384: Initial commit of bcm3384 platform support aff366c68e5c MAINTAINERS: Add entry for BCM33xx cable chips (Ralf, if you just want to drop the above commits and target the new platform for 3.20+, that's fine.) V2->V3: - Omit the BMIPS updates that have already been accepted into Ralf's tree. They are still needed, but not reposted. - Make USB endian swap options conditional on "if CPU_BIG_ENDIAN". - Remove board listing from Documentation/devicetree/bindings/mips/brcm/soc.txt - Remove legacy device autodetection and chip ID decoding. Legacy boards/bootloaders will be supported by selecting a single DTB file to compile into the kernel. - Refactor quirks code to match against DT "compatible" strings, not chip IDs. - Fix CPU1 boot (missing DT node) on 6329. - Remove @0 / addressing properties on non-reg nodes. - Remove bogus "brcm,bmips" bus registration. - Move UBUS peripherals onto a "simple-bus" and set DMA ranges for this bus on bcm3384_zephyr. - Fix base addresses on 6328/6368 for "periph_intc@10000020". - Change the MIPS_L1_CACHE_SHIFT calculation so as to minimize the impact on other builds (like bcm63xx). This series is based on mips-for-linux-next, minus the three 3384 patches listed above, plus these non-MIPS patches: http://patchwork.linux-mips.org/bundle/cernekee/bmips-multi-v3-deps/?state=%2a http://marc.info/?l=linux-usb&m=141305106215886&w=2 (all 3/3) These are queued for tty-next / irqchip-next / usb-next. Re: irqchip patches in this series These apply cleanly on top of earlier bcm7120/brcmstb commits currently in irqchip-next. The BMIPS commit in this series depends on both the irqchip-next updates, and the irqchip updates in this series. Re: syscon/reset I have some patches ready for the brcmstb syscon/reset drivers, but will submit them separately so we can get the basic platform support stuff nailed down first. I don't have a patch ready for gisb-arb support yet, but I have prototyped the change. These patches will also have interdependencies between the arch/mips/boot/dts changes and the drivers/ changes. Re: external (non-MIPS) timers: I left this problem for a future submission. There are a couple of elements to consider: - Do we want to completely eliminate CSRC_R4K and CEVT_R4K in favor of an external timer, and leave mips_hpt_frequency unset? - If so, do all platforms have a suitable timer, and is it hooked up to an IRQ? On STB we saw conflicts with other software when taking over one of the UPG timers; the alternative (WKTMR) doesn't have a suitable alarm/IRQ. - Or do we want to use another timer to calibrate mips_hpt_frequency? In this case we may need to add part of that timer's driver under arch/mips/bmips instead of under drivers/, so it is available early in the boot process. Unfortunately that might cause problems or redundancy sharing the code with ARM platforms. - And if we do wind up using CSRC_R4K / CEVT_R4K, we'll need a way to handle the complications caused by frequency scaling. The brcmstb kernel sources posted on github do this, but it did require changes to other files under arch/mips/kernel/. Re: dma-ranges dma.c implements a minimal remapping scheme just for the current UBUS peripherals. The remapping is global, and it isn't the same mapping needed for PCI(e). A more comprehensive solution will be needed before PCI support can be added. On chips OTHER than 3384, remapping is only required on PCI (not UBUS or "rdb"). Notably, BCM7445, an ARM platform currently supported upstream, doesn't require dma-ranges for non-PCI devices. I am hoping we can piggyback on top of the ARM dma-ranges code once it is merged. This will allow for eliminating my dma.c. Brian Norris (1): irqchip: brcmstb-l2: don't clear wakeable interrupts at init time Dmitry Torokhov (2): irqchip: brcmstb-l2: fix error handling of irq_of_parse_and_map irqchip: bcm7120-l2: fix error handling of irq_of_parse_and_map Kevin Cernekee (8): irqchip: Update docs regarding irq_domain_add_tree() irqchip: bcm7120-l2: Refactor driver for arbitrary IRQEN/IRQSTAT offsets irqchip: bcm7120-l2: Change DT binding to allow non-contiguous IRQEN/IRQSTAT irqchip: Add new driver for BCM7038-style level 1 interrupt controllers MIPS: Let __dt_register_buses accept a single bus type MIPS: Fall back to the generic restart notifier MIPS: Reorder MIPS_L1_CACHE_SHIFT priorities MIPS: Add multiplatform BMIPS target Documentation/IRQ-domain.txt | 3 +- .../interrupt-controller/brcm,bcm7038-l1-intc.txt | 52 ++++ .../interrupt-controller/brcm,bcm7120-l2-intc.txt | 5 +- .../devicetree/bindings/mips/brcm/bmips.txt | 8 + .../devicetree/bindings/mips/brcm/soc.txt | 12 + arch/mips/Kbuild.platforms | 1 + arch/mips/Kconfig | 42 ++- arch/mips/bmips/Kconfig | 50 +++ arch/mips/bmips/Makefile | 1 + arch/mips/bmips/Platform | 7 + arch/mips/bmips/dma.c | 141 +++++++++ arch/mips/bmips/irq.c | 38 +++ arch/mips/bmips/setup.c | 195 ++++++++++++ arch/mips/boot/dts/Makefile | 9 + arch/mips/boot/dts/bcm3384_viper.dtsi | 108 +++++++ arch/mips/boot/dts/bcm3384_zephyr.dtsi | 126 ++++++++ arch/mips/boot/dts/bcm6328.dtsi | 87 ++++++ arch/mips/boot/dts/bcm6368.dtsi | 94 ++++++ arch/mips/boot/dts/bcm7125.dtsi | 107 +++++++ arch/mips/boot/dts/bcm7346.dtsi | 192 ++++++++++++ arch/mips/boot/dts/bcm7360.dtsi | 129 ++++++++ arch/mips/boot/dts/bcm7420.dtsi | 151 ++++++++++ arch/mips/boot/dts/bcm7425.dtsi | 191 ++++++++++++ arch/mips/boot/dts/bcm93384wvg.dts | 25 ++ arch/mips/boot/dts/bcm93384wvg_viper.dts | 25 ++ arch/mips/boot/dts/bcm96368mvwg.dts | 31 ++ arch/mips/boot/dts/bcm97125cbmb.dts | 31 ++ arch/mips/boot/dts/bcm97346dbsmb.dts | 58 ++++ arch/mips/boot/dts/bcm97360svmb.dts | 34 +++ arch/mips/boot/dts/bcm97420c.dts | 45 +++ arch/mips/boot/dts/bcm97425svmb.dts | 60 ++++ arch/mips/boot/dts/bcm9ejtagprb.dts | 22 ++ arch/mips/configs/bmips_be_defconfig | 86 ++++++ arch/mips/configs/bmips_stb_defconfig | 86 ++++++ arch/mips/include/asm/mach-bmips/dma-coherence.h | 45 +++ arch/mips/include/asm/mach-bmips/spaces.h | 17 ++ arch/mips/include/asm/mach-bmips/war.h | 24 ++ arch/mips/kernel/prom.c | 5 +- arch/mips/kernel/reset.c | 2 + drivers/irqchip/Kconfig | 5 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-bcm7038-l1.c | 335 +++++++++++++++++++++ drivers/irqchip/irq-bcm7120-l2.c | 105 +++++-- drivers/irqchip/irq-brcmstb-l2.c | 13 +- 44 files changed, 2768 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt create mode 100644 Documentation/devicetree/bindings/mips/brcm/bmips.txt create mode 100644 Documentation/devicetree/bindings/mips/brcm/soc.txt create mode 100644 arch/mips/bmips/Kconfig create mode 100644 arch/mips/bmips/Makefile create mode 100644 arch/mips/bmips/Platform create mode 100644 arch/mips/bmips/dma.c create mode 100644 arch/mips/bmips/irq.c create mode 100644 arch/mips/bmips/setup.c create mode 100644 arch/mips/boot/dts/bcm3384_viper.dtsi create mode 100644 arch/mips/boot/dts/bcm3384_zephyr.dtsi create mode 100644 arch/mips/boot/dts/bcm6328.dtsi create mode 100644 arch/mips/boot/dts/bcm6368.dtsi create mode 100644 arch/mips/boot/dts/bcm7125.dtsi create mode 100644 arch/mips/boot/dts/bcm7346.dtsi create mode 100644 arch/mips/boot/dts/bcm7360.dtsi create mode 100644 arch/mips/boot/dts/bcm7420.dtsi create mode 100644 arch/mips/boot/dts/bcm7425.dtsi create mode 100644 arch/mips/boot/dts/bcm93384wvg.dts create mode 100644 arch/mips/boot/dts/bcm93384wvg_viper.dts create mode 100644 arch/mips/boot/dts/bcm96368mvwg.dts create mode 100644 arch/mips/boot/dts/bcm97125cbmb.dts create mode 100644 arch/mips/boot/dts/bcm97346dbsmb.dts create mode 100644 arch/mips/boot/dts/bcm97360svmb.dts create mode 100644 arch/mips/boot/dts/bcm97420c.dts create mode 100644 arch/mips/boot/dts/bcm97425svmb.dts create mode 100644 arch/mips/boot/dts/bcm9ejtagprb.dts create mode 100644 arch/mips/configs/bmips_be_defconfig create mode 100644 arch/mips/configs/bmips_stb_defconfig create mode 100644 arch/mips/include/asm/mach-bmips/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-bmips/spaces.h create mode 100644 arch/mips/include/asm/mach-bmips/war.h create mode 100644 drivers/irqchip/irq-bcm7038-l1.c -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/