Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754880AbaKXTgR (ORCPT ); Mon, 24 Nov 2014 14:36:17 -0500 Received: from mail.linuxfoundation.org ([140.211.169.12]:54949 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754303AbaKXTgO (ORCPT ); Mon, 24 Nov 2014 14:36:14 -0500 Date: Mon, 24 Nov 2014 11:36:13 -0800 From: Greg Kroah-Hartman To: Frank Rowand Cc: Stephen Boyd , Linux Kernel list , "linux-arm-msm@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , linux-serial@vger.kernel.org, Olof Johansson , Arnd Bergmann , Tyler Baker , Kevin Hilman , "devicetree@vger.kernel.org" Subject: Re: [PATCH] tty: serial: msm_serial: document DT alias Message-ID: <20141124193613.GA10106@kroah.com> References: <54667D13.2070105@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <54667D13.2070105@gmail.com> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Nov 14, 2014 at 02:07:15PM -0800, Frank Rowand wrote: > From: Frank Rowand > > Update devicetree binding for msm_serial to reflect msm_serial_probe() > getting line id (port number) from the serialN alias. > > Signed-off-by: Frank Rowand > --- > Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++-- > 1 file changed, 13 insertions(+), 2 deletions(-) > > Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt > =================================================================== > --- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt > +++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt > @@ -27,27 +27,52 @@ Optional properties: > - dmas: Should contain dma specifiers for transmit and receive channels > - dma-names: Should contain "tx" for transmit and "rx" for receive channels > > +Note: Aliases may be defined to ensure the correct ordering of the UARTs. > +The alias serialN will result in the UART being assigned port N. If any > +serialN alias exists, then an alias must exist for each enabled UART. The > +serialN aliases should be in a .dts file instead of in a .dtsi file. > + > Examples: > > -A uartdm v1.4 device with dma capabilities. > +- A uartdm v1.4 device with dma capabilities. > + > + serial@f991e000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0xf991e000 0x1000>; > + interrupts = <0 108 0x0>; > + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; > + clock-names = "core", "iface"; > + dmas = <&dma0 0>, <&dma0 1>; > + dma-names = "tx", "rx"; > + }; > + > +- A uartdm v1.3 device without dma capabilities and part of a GSBI complex. > + > + serial@19c40000 { > + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; > + reg = <0x19c40000 0x1000>, > + <0x19c00000 0x1000>; > + interrupts = <0 195 0x0>; > + clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>; > + clock-names = "core", "iface"; > + }; > + > +- serialN alias. > + > + aliases { > + serial0 = &uarta; > + serial1 = &uartc; > + serial2 = &uartb; > + }; > + > + uarta: serial@12490000 { > + status = "ok"; > + }; > + > + uartb: serial@16340000 { > + status = "ok"; > + }; > > -serial@f991e000 { > - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > - reg = <0xf991e000 0x1000>; > - interrupts = <0 108 0x0>; > - clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; > - clock-names = "core", "iface"; > - dmas = <&dma0 0>, <&dma0 1>; > - dma-names = "tx", "rx"; > -}; > - > -A uartdm v1.3 device without dma capabilities and part of a GSBI complex. > - > -serial@19c40000 { > - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; > - reg = <0x19c40000 0x1000>, > - <0x19c00000 0x1000>; > - interrupts = <0 195 0x0>; > - clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>; > - clock-names = "core", "iface"; > -}; > + uartc: serial@1a240000 { > + status = "ok"; > + }; Git complained about a whitespace issue in this patch, which I fixed up by hand. Please be more careful... thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/