Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932115AbaKXUPQ (ORCPT ); Mon, 24 Nov 2014 15:15:16 -0500 Received: from smtp.codeaurora.org ([198.145.11.231]:43093 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754960AbaKXUPM (ORCPT ); Mon, 24 Nov 2014 15:15:12 -0500 From: Mitchel Humpherys To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, iommu@lists.linux-foundation.org, Thierry Reding , Will Deacon , Arnd Bergmann , Andrew Morton Cc: Matt Wagantall , Mitchel Humpherys Subject: [PATCH RESEND v8] iopoll: Introduce memory-mapped IO polling macros Date: Mon, 24 Nov 2014 12:14:52 -0800 Message-Id: <1416860092-11620-1-git-send-email-mitchelh@codeaurora.org> X-Mailer: git-send-email 2.1.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Matt Wagantall It is sometimes necessary to poll a memory-mapped register until its value satisfies some condition. Introduce a family of convenience macros that do this. Tight-looping, sleeping, and timing out can all be accomplished using these macros. Cc: Thierry Reding Cc: Will Deacon Cc: Arnd Bergmann Cc: Andrew Morton Signed-off-by: Matt Wagantall Signed-off-by: Mitchel Humpherys --- This patch was originally part of a series [1] for adding support for IOMMU address translations through an ARM SMMU hardware register. The other patch in the series (the one that actually uses these macros and implements said hardware address translations) was Ack'd by the driver maintainer there (Will Deacon) so I've pulled this patch out to avoid resending an already Ack'd patch over and over again. In short, please see [1] for previous discussion and the first user of these macros. This patch has been resent previously here [2], here [3], and here [4] on 2014-10-30, 2014-11-06, and 2014-11-17, respectively. It has not changed since [2] and has not received any comments since [1] on 2014-10-19. Thanks to everyone who has taken a look at this. [1] http://thread.gmane.org/gmane.linux.kernel.iommu/7140 [2] http://thread.gmane.org/gmane.linux.kernel/1818213 [3] http://thread.gmane.org/gmane.linux.kernel/1823422 [4] http://thread.gmane.org/gmane.linux.kernel.iommu/7394 Changes since v7: - sorted helper macros by size (b, w, l, q) - removed some of the more esoteric (or flat-out bogus) helper macros --- include/linux/iopoll.h | 140 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 include/linux/iopoll.h diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h new file mode 100644 index 0000000000..bd161dae2d --- /dev/null +++ b/include/linux/iopoll.h @@ -0,0 +1,140 @@ +/* + * Copyright (c) 2012-2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _LINUX_IOPOLL_H +#define _LINUX_IOPOLL_H + +#include +#include +#include +#include +#include +#include + +/** + * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs + * @op: accessor function (takes @addr as its only argument) + * @addr: Address to poll + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops) + * @timeout_us: Timeout in us, 0 means never timeout + * + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @addr is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + */ +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \ +({ \ + ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ + might_sleep_if(sleep_us); \ + for (;;) { \ + (val) = op(addr); \ + if (cond) \ + break; \ + if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ + (val) = op(addr); \ + break; \ + } \ + if (sleep_us) \ + usleep_range((sleep_us >> 2) + 1, sleep_us); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +/** + * readx_poll_timeout_atomic - Periodically poll an address until a condition is met or a timeout occurs + * @op: accessor function (takes @addr as its only argument) + * @addr: Address to poll + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @delay_us: Time to udelay between reads in us (0 tight-loops) + * @timeout_us: Timeout in us, 0 means never timeout + * + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @addr is stored in @val. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + */ +#define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \ +({ \ + ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ + for (;;) { \ + (val) = op(addr); \ + if (cond) \ + break; \ + if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ + (val) = op(addr); \ + break; \ + } \ + if (delay_us) \ + udelay(delay_us); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + + +#define readb_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readb, addr, val, cond, delay_us, timeout_us) + +#define readb_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readb, addr, val, cond, delay_us, timeout_us) + +#define readw_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readw, addr, val, cond, delay_us, timeout_us) + +#define readw_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readw, addr, val, cond, delay_us, timeout_us) + +#define readl_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readl, addr, val, cond, delay_us, timeout_us) + +#define readl_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readl, addr, val, cond, delay_us, timeout_us) + +#define readq_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readq, addr, val, cond, delay_us, timeout_us) + +#define readq_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readq, addr, val, cond, delay_us, timeout_us) + +#define readb_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readb_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readb_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readb_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readw_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readw_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readw_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readw_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readl_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readl_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readq_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readq_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readq_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readq_relaxed, addr, val, cond, delay_us, timeout_us) + +#endif /* _LINUX_IOPOLL_H */ -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/