Date: Tue, 25 Nov 2014 16:52:43 +0000
From: Lee Jones <lee.jones@linaro.org>
To: "Tan, Raymond" <raymond.tan@intel.com>, mturquette@linaro.org
Cc: Samuel Ortiz <sameo@linux.intel.com>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "Chen, Alvin" <alvin.chen@intel.com>,
        "Shevchenko, Andriy" <andriy.shevchenko@intel.com>
Subject: Re: [PATCH v2 1/1] mfd: intel_quark_i2c_gpio: Add Intel Quark X1000
 I2C-GPIO MFD Driver
Message-ID: <20141125165243.GQ4241@x1>
References: <1415713349-16065-1-git-send-email-raymond.tan@intel.com>
 <1415713349-16065-2-git-send-email-raymond.tan@intel.com>
 <20141118172156.GF13959@x1>
 <F0CA9E243F4F424B836EAC30E41BF4CF5C7989F2@PGSMSX104.gar.corp.intel.com>
 <20141125165105.GP4241@x1>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20141125165105.GP4241@x1>
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: linux-kernel-owner@vger.kernel.org

Crap!  Forgot to Cc Mike.

Fingers faster than brain.

> Mike,
> 
> Something for you down below.
> 
> > > > In Quark X1000, there's a single PCI device that provides both an I2C
> > > > controller and a GPIO controller. This MFD driver will split the 2
> > > > devices for their respective drivers.
> > > >
> > > > This patch is based on Josef Ahmad's initial work for Quark enabling.
> > > >
> > > > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > > > Signed-off-by: Weike Chen <alvin.chen@intel.com>
> > > > Signed-off-by: Raymond Tan <raymond.tan@intel.com>
> > > > ---
> > > >  drivers/mfd/Kconfig                |   11 ++
> > > >  drivers/mfd/Makefile               |    1 +
> > > >  drivers/mfd/intel_quark_i2c_gpio.c |  298
> > > > ++++++++++++++++++++++++++++++++++++
> > > >  3 files changed, 310 insertions(+)
> > > >  create mode 100644 drivers/mfd/intel_quark_i2c_gpio.c
> 
> [...]
> 
> > > > +	depends on COMMON_CLK
> > > 
> > > I don't think you should depend on this.  Just use the API and fail if it doesn't
> > > find the clock you're after.
> > 
> > This was added to make sure the clk initialization and other clk related calls will work with the MFD.
> 
> [...]
> 
> > > > +struct clk *intel_quark_i2c_clk;
> > > > +struct clk_lookup *intel_quark_i2c_clk_lookups;
> > > 
> > > Why do these need to be global?
> > 
> > I was trying to keep these as runtime allocated variables, and cleaned up with removal of the driver / upon error handling.
> 
> They still can be.  But they need to be in a struct somewhere and not
> global.
> 
> [...]
> 
> > > > +static int intel_quark_register_i2c_clk(struct pci_dev *pdev) {
> > > > +	intel_quark_i2c_clk_lookups = devm_kcalloc(
> > > > +
> > > > +		&pdev->dev, INTEL_QUARK_I2C_NCLK,
> > > > +		sizeof(*intel_quark_i2c_clk_lookups), GFP_KERNEL);
> > > > +
> > > > +	if (!intel_quark_i2c_clk_lookups)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	intel_quark_i2c_clk_lookups[0].dev_id =
> > > > +INTEL_QUARK_I2C_CONTROLLER_CLK;
> > > > +
> > > > +	intel_quark_i2c_clk = clk_register_fixed_rate(
> > > > +		&pdev->dev, INTEL_QUARK_I2C_CONTROLLER_CLK, NULL,
> > > > +		CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ);
> > > > +
> > > > +	return clk_register_clkdevs(intel_quark_i2c_clk,
> > > > +		intel_quark_i2c_clk_lookups, INTEL_QUARK_I2C_NCLK);
> > > 
> > > We don't normally register clks from MFD.  Normally they are registered in
> > > drivers/clk and fetched when a device requires them.
> > > Why is this different?
> > 
> > This is a static clk and on this platform, there's no clk hardware
> > to have the clk driver to initialize this and add into the global
> > struct for use
> > later by i2c controller. The hardware on the platform itself is
> > same, and the current driver (i2c_designware_platform) requires the
> > clk 
> > for its operation. Due to this, I decided to have the clk initialize
> > in the MFD before the device being added, which later will trigger
> > the probe on the i2c controller driver. 
> 
> Mike,
> 
> Can I get your input on this please?
> 
> [...]
> 
> > > > +	pdata = intel_quark_get_i2c_mode(pdev);
> > > > +	if (IS_ERR(pdata))
> > > > +		return PTR_ERR(pdata);
> > > 
> > > Bring this functionality into here?
> > 
> > Were you referring the contents of intel_quark_get_i2c_mode(), and avoid the additional function call instead?
> 
> Right.  Please rid intel_quark_get_i2c_mode().
> 
> [...]
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/