Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751859AbaKYXDJ (ORCPT ); Tue, 25 Nov 2014 18:03:09 -0500 Received: from mail-wg0-f45.google.com ([74.125.82.45]:52797 "EHLO mail-wg0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751169AbaKYXDH convert rfc822-to-8bit (ORCPT ); Tue, 25 Nov 2014 18:03:07 -0500 MIME-Version: 1.0 In-Reply-To: References: <1416329275-7130-1-git-send-email-daniel.baluta@intel.com> <5473D111.9050509@gmx.de> <5475035C.8040107@gmx.de> Date: Wed, 26 Nov 2014 01:03:05 +0200 X-Google-Sender-Auth: uOgligGxWm-JT_3znTAldX3MmbE Message-ID: Subject: Re: [PATCH v3] iio: imu: Add support for Kionix KMX61 sensor From: Daniel Baluta To: Daniel Baluta Cc: Hartmut Knaack , Jonathan Cameron , Peter Meerwald , Srinivas Pandruvada , "linux-iio@vger.kernel.org" , Linux Kernel Mailing List Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Nov 26, 2014 at 12:44 AM, Daniel Baluta wrote: > On Wed, Nov 26, 2014 at 12:31 AM, Hartmut Knaack wrote: >> Daniel Baluta schrieb am 25.11.2014 10:54: >>> On Tue, Nov 25, 2014 at 2:45 AM, Hartmut Knaack wrote: >>>> Daniel Baluta schrieb am 18.11.2014 17:47: >>>>> Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports >>>>> raw accel/magn readings together with scale and sampling frequency. >>>>> >>>>> Datasheet will be available at: >>>>> http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61 >>>>> >>>> Finally managed to have a close look, and found a few issues. >>>>> Signed-off-by: Daniel Baluta >>>>> --- >>>>> Changes since v2: >>>>> * mostly style fixes after comments received from Jonathan and Peter >>>>> * http://marc.info/?l=linux-iio&m=141564019602400&w=2 >>>>> * implemented PM runtime and PM sleep resume/suspend hooks >>>>> * introduced new parameter for kmx61_set_mode to help updating >>>>> stby bits in kmx61_data. >>>>> * use kmx6111021 instead of kmx61 for i2c_device_id. >>>>> >>>>> drivers/iio/imu/Kconfig | 9 + >>>>> drivers/iio/imu/Makefile | 2 + >>>>> drivers/iio/imu/kmx61.c | 766 +++++++++++++++++++++++++++++++++++++++++++++++ >>>>> 3 files changed, 777 insertions(+) >>>>> create mode 100644 drivers/iio/imu/kmx61.c >>>>> >>>>> diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig >>>>> index 2b0e451..d675f43 100644 >>>>> --- a/drivers/iio/imu/Kconfig >>>>> +++ b/drivers/iio/imu/Kconfig >>>>> @@ -25,6 +25,15 @@ config ADIS16480 >>>>> Say yes here to build support for Analog Devices ADIS16375, ADIS16480, >>>>> ADIS16485, ADIS16488 inertial sensors. >>>>> >>>>> +config KMX61 >>>>> + tristate "Kionix KMX61 6-axis accelerometer and magnetometer" >>>>> + depends on I2C >>>>> + help >>>>> + Say Y here if you want to build a driver for Kionix KMX61 6-axis accelerometer >>>>> + and magnetometer. >>>>> + To compile this driver as module, choose M here: the module will be called >>>>> + kmx61. >>>>> + >>>> This help text is more than 80 characters wide and may better be wrapped a bit differently. >>> >>> Good catch. checkpatch.pl didn't complain. >>> >>>>> source "drivers/iio/imu/inv_mpu6050/Kconfig" >>>>> >>>>> endmenu >>>>> diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile >>>>> index 114d2c1..e1e6e3d 100644 >>>>> --- a/drivers/iio/imu/Makefile >>>>> +++ b/drivers/iio/imu/Makefile >>>>> @@ -14,3 +14,5 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o >>>>> obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o >>>>> >>>>> obj-y += inv_mpu6050/ >>>>> + >>>>> +obj-$(CONFIG_KMX61) += kmx61.o >>>>> diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c >>>>> new file mode 100644 >>>>> index 0000000..f68b3ef >>>>> --- /dev/null >>>>> +++ b/drivers/iio/imu/kmx61.c >>>>> @@ -0,0 +1,766 @@ >>>>> +/* >>>>> + * KMX61 - Kionix 6-axis Accelerometer/Magnetometer >>>>> + * >>>>> + * Copyright (c) 2014, Intel Corporation. >>>>> + * >>>>> + * This file is subject to the terms and conditions of version 2 of >>>>> + * the GNU General Public License. See the file COPYING in the main >>>>> + * directory of this archive for more details. >>>>> + * >>>>> + * IIO driver for KMX61 (7-bit I2C slave address 0x0E or 0x0F). >>>>> + * >>>>> + * TODO: buffer, interrupt, thresholds, acpi, temperature sensor >>>>> + * >>>>> + */ >>>>> + >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> + >>>>> +#define KMX61_DRV_NAME "kmx61" >>>>> + >>>>> +#define KMX61_REG_WHO_AM_I 0x00 >>>>> + >>>>> +/* >>>>> + * three 16-bit accelerometer output registers for X/Y/Z axis >>>>> + * we use only XOUT_L as a base register, all other addresses >>>>> + * can be obtained by applying an offset and are provided here >>>>> + * only for clarity. >>>>> + */ >>>>> +#define KMX61_ACC_XOUT_L 0x0A >>>>> +#define KMX61_ACC_XOUT_H 0x0B >>>>> +#define KMX61_ACC_YOUT_L 0x0C >>>>> +#define KMX61_ACC_YOUT_H 0x0D >>>>> +#define KMX61_ACC_ZOUT_L 0x0E >>>>> +#define KMX61_ACC_ZOUT_H 0x0F >>>>> + >>>>> +/* >>>>> + * one 16-bit temperature output register >>>>> + */ >>>>> +#define KMX61_TEMP_L 0x10 >>>>> +#define KMX61_TEMP_H 0x11 >>>>> + >>>>> +/* >>>>> + * three 16-bit magnetometer output registers for X/Y/Z axis >>>>> + */ >>>>> +#define KMX61_MAG_XOUT_L 0x12 >>>>> +#define KMX61_MAG_XOUT_H 0x13 >>>>> +#define KMX61_MAG_YOUT_L 0x14 >>>>> +#define KMX61_MAG_YOUT_H 0x15 >>>>> +#define KMX61_MAG_ZOUT_L 0x16 >>>>> +#define KMX61_MAG_ZOUT_H 0x17 >>>>> + >>>>> +#define KMX61_REG_ODCNTL 0x2C >>>>> +#define KMX61_REG_STBY 0x29 >>>>> +#define KMX61_REG_CTRL1 0x2A >>>>> + >>>>> +#define KMX61_ACC_STBY_BIT BIT(0) >>>>> +#define KMX61_MAG_STBY_BIT BIT(1) >>>>> +#define KMX61_ACT_STBY_BIT BIT(7) >>>>> + >>>>> +#define KMX61_ALL_STBY (KMX61_ACC_STBY_BIT | KMX61_MAG_STBY_BIT) >>>>> + >>>>> +#define KMX61_REG_CTRL1_GSEL0_SHIFT 0 >>>>> +#define KMX61_REG_CTRL1_GSEL1_SHIFT 1 >>>>> +#define KMX61_REG_CTRL1_GSEL0_MASK 0x01 >>>>> +#define KMX61_REG_CTRL1_GSEL1_MASK 0x02 >>>> I don't see the benefit of separating GSEL0 and GSEL1. >>>>> + >>>>> +#define KMX61_REG_CTRL1_BIT_RES BIT(4) >>>>> + >>>>> +#define KMX61_ACC_ODR_SHIFT 0 >>>>> +#define KMX61_MAG_ODR_SHIFT 4 >>>>> +#define KMX61_ACC_ODR_MASK 0x0F >>>>> +#define KMX61_MAG_ODR_MASK 0xF0 >>>>> + >>>>> +#define KMX61_SLEEP_DELAY_MS 2000 >>>>> + >>>>> +#define KMX61_CHIP_ID 0x12 >>>>> + >>>>> +struct kmx61_data { >>>>> + struct i2c_client *client; >>>>> + >>>>> + /* serialize access to non-atomic ops, e.g set_mode */ >>>>> + struct mutex lock; >>>>> + u8 range; >>>>> + u8 odr_bits; >>>>> + >>>>> + /* standby state */ >>>>> + u8 acc_stby; >>>>> + u8 mag_stby; >>>> Why u8 instead of bool? >>> >>> Hmm, correct. I was thinking bitwise, but you are right. Will fix. >>> >>>>> + >>>>> + /* power state */ >>>>> + bool acc_ps; >>>>> + bool mag_ps; >>>>> +}; >>>>> + >>>>> +enum kmx61_range { >>>>> + KMX61_RANGE_2G, >>>>> + KMX61_RANGE_4G, >>>>> + KMX61_RANGE_8G, >>>>> +}; >>>>> + >>>>> +enum kmx61_scan { >>>>> + KMX61_SCAN_ACC_X, >>>>> + KMX61_SCAN_ACC_Y, >>>>> + KMX61_SCAN_ACC_Z, >>>>> + KMX61_SCAN_TEMP, >>>>> + KMX61_SCAN_MAG_X, >>>>> + KMX61_SCAN_MAG_Y, >>>>> + KMX61_SCAN_MAG_Z, >>>>> +}; >>>>> + >>>>> +static const struct { >>>>> + u16 uscale; >>>>> + u8 gsel0; >>>>> + u8 gsel1; >>>>> +} kmx61_scale_table[] = { >>>>> + {9582, 0, 0}, >>>>> + {19163, 1, 0}, >>>>> + {38326, 0, 1}, >>>> Why not consolidate gsel0 and gsel1 to gsel? Then this could become u16 kmx61_scale[] = {9582, 19163, 38326} with gsel as index. >>> >>> True. Will fix. >>> >>>>> +}; >>>>> + >>>>> +/* KMX61 devices */ >>>>> +#define KMX61_ACC 0x01 >>>>> +#define KMX61_MAG 0x02 >>>>> + >>>>> +static const struct { >>>>> + int val; >>>>> + int val2; >>>>> + u8 odr_bits; >>>>> +} kmx61_samp_freq_table[] = { {12, 500000, 0x00}, >>>>> + {25, 0, 0x01}, >>>>> + {50, 0, 0x02}, >>>>> + {100, 0, 0x03}, >>>>> + {200, 0, 0x04}, >>>>> + {400, 0, 0x05}, >>>>> + {800, 0, 0x06}, >>>>> + {1600, 0, 0x07}, >>>>> + {0, 781000, 0x08}, >>>>> + {1, 563000, 0x09}, >>>>> + {3, 125000, 0x0A}, >>>>> + {6, 250000, 0x0B} }; >>>>> + >>>>> +static IIO_CONST_ATTR(accel_scale_available, "0.009582 0.019163 0.038326"); >>>>> +static IIO_CONST_ATTR(magn_scale_available, "0.001465"); >>>>> +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( >>>>> + "0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800"); >>>>> + >>>>> +static struct attribute *kmx61_attributes[] = { >>>>> + &iio_const_attr_accel_scale_available.dev_attr.attr, >>>>> + &iio_const_attr_magn_scale_available.dev_attr.attr, >>>>> + &iio_const_attr_sampling_frequency_available.dev_attr.attr, >>>>> + NULL, >>>>> +}; >>>>> + >>>>> +static const struct attribute_group kmx61_attribute_group = { >>>>> + .attrs = kmx61_attributes, >>>>> +}; >>>>> + >>>>> +#define KMX61_ACC_CHAN(_axis, _index) { \ >>>>> + .type = IIO_ACCEL, \ >>>>> + .modified = 1, \ >>>>> + .channel2 = IIO_MOD_ ## _axis, \ >>>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ >>>>> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ >>>>> + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ >>>>> + .address = KMX61_ACC, \ >>>>> + .scan_index = _index, \ >>>>> + .scan_type = { \ >>>>> + .sign = 's', \ >>>>> + .realbits = 12, \ >>>>> + .storagebits = 16, \ >>>>> + .shift = 4, \ >>>>> + .endianness = IIO_LE, \ >>>>> + }, \ >>>>> +} >>>>> + >>>>> +#define KMX61_MAG_CHAN(_axis, _index) { \ >>>>> + .type = IIO_MAGN, \ >>>>> + .modified = 1, \ >>>>> + .channel2 = IIO_MOD_ ## _axis, \ >>>>> + .address = KMX61_MAG, \ >>>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ >>>>> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ >>>>> + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ >>>>> + .scan_index = _index, \ >>>>> + .scan_type = { \ >>>>> + .sign = 's', \ >>>>> + .realbits = 14, \ >>>>> + .storagebits = 16, \ >>>>> + .shift = 2, \ >>>>> + .endianness = IIO_LE, \ >>>>> + }, \ >>>>> +} >>>>> + >>>>> +static const struct iio_chan_spec kmx61_channels[] = { >>>>> + KMX61_ACC_CHAN(X, KMX61_SCAN_ACC_X), >>>>> + KMX61_ACC_CHAN(Y, KMX61_SCAN_ACC_Y), >>>>> + KMX61_ACC_CHAN(Z, KMX61_SCAN_ACC_Z), >>>>> + KMX61_MAG_CHAN(X, KMX61_SCAN_MAG_X), >>>>> + KMX61_MAG_CHAN(Y, KMX61_SCAN_MAG_Y), >>>>> + KMX61_MAG_CHAN(Z, KMX61_SCAN_MAG_Z), >>>>> +}; >>>>> + >>>>> +static int kmx61_convert_freq_to_bit(int val, int val2) >>>>> +{ >>>>> + int i; >>>>> + >>>>> + for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++) >>>>> + if (val == kmx61_samp_freq_table[i].val && >>>>> + val2 == kmx61_samp_freq_table[i].val2) >>>>> + return kmx61_samp_freq_table[i].odr_bits; >>>>> + return -EINVAL; >>>>> +} >>>>> +/** >>>> Like here, the first line of the following multiline comments have one asterisk too much. >>> >>> I think this is the convention, when adding doxygen style documentation: >>> http://lxr.free-electrons.com/source/fs/eventpoll.c#L382 >>> >>>>> + * kmx61_set_mode() - set KMX61 device operating mode >>>>> + * @data - kmx61 device private data pointer >>>>> + * @mode - bitmask, indicating operating mode for @device >>>>> + * @device - bitmask, indicating device for which @mode needs to be set >>>>> + * @update - update stby bits stored in device's private @data >>>>> + * >>>>> + * For each sensor (accelerometer/magnetometer) there are two operating modes >>>>> + * STANDBY and OPERATION. Neither accel nor magn can be disabled independently >>>>> + * if they are both enabled. Internal sensors state is saved in acc_stby and >>>>> + * mag_stby members of driver's private @data. >>>>> + */ >>>>> +static int kmx61_set_mode(struct kmx61_data *data, u8 mode, u8 device, >>>>> + bool update) >>>>> +{ >>>>> + int ret; >>>>> + int acc_stby = -1, mag_stby = -1; >>>>> + >>>>> + ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "Error reading reg_stby\n"); >>>>> + return ret; >>>>> + } >>>>> + if (device & KMX61_ACC) { >>>>> + if (mode & KMX61_ACC_STBY_BIT) { >>>>> + ret |= KMX61_ACC_STBY_BIT; >>>>> + acc_stby = 1; >>>>> + } else { >>>>> + ret &= ~KMX61_ACC_STBY_BIT; >>>>> + acc_stby = 0; >>>>> + } >>>>> + } >>>>> + >>>>> + if (device & KMX61_MAG) { >>>>> + if (mode & KMX61_MAG_STBY_BIT) { >>>>> + ret |= KMX61_MAG_STBY_BIT; >>>>> + mag_stby = 1; >>>>> + } else { >>>>> + ret &= ~KMX61_MAG_STBY_BIT; >>>>> + mag_stby = 0; >>>>> + } >>>>> + } >>>>> + >>>>> + ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_STBY, ret); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "Error writing reg_stby\n"); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + if (acc_stby != -1 && update) >>>>> + data->acc_stby = !!acc_stby; >>>>> + if (mag_stby != -1 && update) >>>>> + data->mag_stby = !!mag_stby; >>>> Why is there a need for double negation? >>> >>> Correct. Now it doesn't make sense since data->acc_stby is u8. >>> >>> But, with your suggestion if I will use bool to represent data->acc_stby >>> then I think the code should use double negation to make it clear >>> that data->acc_stby is bool and acc_stby is int. >>> >> Well, if it makes you happy, then go ahead. My interpretation of a bool is, that an assignment of 0 becomes 0/false, and an assignment of anything else becomes 1/true. So, I wouldn't see a need here (especially since acc_stby/mag_stby were distinctly assigned either 0 or 1). > > All right. It makes sense. > >>>>> + >>>>> + return ret; >>>> Since no error occured until this point, just return 0. >>> >>> Ok. Will fix. >>> >>>>> +} >>>>> + >>>>> +static int kmx61_get_mode(struct kmx61_data *data, u8 *mode, u8 device) >>>>> +{ >>>>> + int ret; >>>>> + >>>>> + ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "Error reading reg_stby\n"); >>>>> + return ret; >>>>> + } >>>>> + *mode = 0; >>>>> + >>>>> + if (device & KMX61_ACC) { >>>>> + if (ret & KMX61_ACC_STBY_BIT) >>>>> + *mode |= KMX61_ACC_STBY_BIT; >>>>> + else >>>>> + *mode &= ~KMX61_ACC_STBY_BIT; >>>> Simply: >>>> *mode |= ret & KMX61_ACC_STBY_BIT; >>> Ok. >>> >>>>> + } >>>>> + >>>>> + if (device & KMX61_MAG) { >>>>> + if (ret & KMX61_MAG_STBY_BIT) >>>>> + *mode |= KMX61_MAG_STBY_BIT; >>>>> + else >>>>> + *mode &= ~KMX61_MAG_STBY_BIT; >>>> Same here: >>> Ok. >>> >>>> *mode |= ret & KMX61_MAG_STBY_BIT; >>>>> + } >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int kmx61_set_odr(struct kmx61_data *data, int val, int val2, u8 device) >>>>> +{ >>>>> + int ret; >>>>> + u8 mode; >>>>> + int lodr_bits, odr_bits; >>>>> + >>>>> + ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + lodr_bits = kmx61_convert_freq_to_bit(val, val2); >>>>> + if (lodr_bits < 0) >>>>> + return lodr_bits; >>>>> + >>>>> + /* To change ODR, accel and magn must be in STDBY */ >>>>> + ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, >>>>> + true); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + odr_bits = 0; >>>>> + if (device & KMX61_ACC) >>>>> + odr_bits |= lodr_bits; >>>>> + if (device & KMX61_MAG) >>>>> + odr_bits |= (lodr_bits << KMX61_MAG_ODR_SHIFT); >>>> No need for parenthesis. >>> ok. >>> >>>>> + >>>>> + ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_ODCNTL, >>>>> + odr_bits); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + ret = kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + data->odr_bits = lodr_bits; >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static >>>>> +int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2, u8 device) >>>> Usually wrap parameters? And don't put code on line with {. >>> >>> Will fix. >>> >>>>> +{ int i; >>>>> + u8 lodr_bits; >>>>> + >>>>> + if (device & KMX61_ACC) >>>>> + lodr_bits = (data->odr_bits >> KMX61_ACC_ODR_SHIFT) & >>>>> + KMX61_ACC_ODR_MASK; >>>> KMX61_ACC_ODR_SHIFT is just a placebo and not used in kmx61_set_odr. Choose one way and stay consistent. >>> >>> placebo is good. will fix kmx61_set_odr :) >>> >>>>> + else if (device & KMX61_MAG) >>>>> + lodr_bits = (data->odr_bits >> KMX61_MAG_ODR_SHIFT) & >>>>> + KMX61_MAG_ODR_MASK; >>>>> + else >>>>> + return -EINVAL; >>>>> + >>>>> + for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++) >>>>> + if (lodr_bits == kmx61_samp_freq_table[i].odr_bits) { >>>>> + *val = kmx61_samp_freq_table[i].val; >>>>> + *val2 = kmx61_samp_freq_table[i].val2; >>>>> + return 0; >>>> return IIO_VAL_INT_PLUS_MICRO allows you to faciliate _read_raw a bit to just return ret there. >>> >>> Hmm, If you don't mind I want to keep this as it is, just to >>> be consistent with the rest of the functions. The convention >>> used is to return 0 in case of success. >>> >> Up to you. Though kmx61_read_raw() would be an example of a function that doesn't follow this convention ;-) And there is no real benefit of checking an error code there, which is passed up anyway. >>>>> + } >>>>> + return -EINVAL; >>>>> +} >>>>> + >>>>> +static int kmx61_set_range(struct kmx61_data *data, int range) >>>>> +{ >>>>> + int ret; >>>>> + >>>>> + ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + ret &= ~(KMX61_REG_CTRL1_GSEL0_MASK | KMX61_REG_CTRL1_GSEL1_MASK); >>>>> + ret |= kmx61_scale_table[range].gsel0 << KMX61_REG_CTRL1_GSEL0_SHIFT; >>>>> + ret |= kmx61_scale_table[range].gsel1 << KMX61_REG_CTRL1_GSEL1_SHIFT; >>>>> + >>>>> + ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + data->range = range; >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int kmx61_set_scale(struct kmx61_data *data, int uscale) >>>>> +{ >>>>> + int ret, i; >>>>> + u8 mode; >>>>> + >>>>> + for (i = 0; i < ARRAY_SIZE(kmx61_scale_table); i++) { >>>>> + if (kmx61_scale_table[i].uscale == uscale) { >>>>> + ret = kmx61_get_mode(data, &mode, >>>>> + KMX61_ACC | KMX61_MAG); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + ret = kmx61_set_mode(data, KMX61_ALL_STBY, >>>>> + KMX61_ACC | KMX61_MAG, true); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + ret = kmx61_set_range(data, i); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + return kmx61_set_mode(data, mode, >>>>> + KMX61_ACC | KMX61_MAG, true); >>>>> + } >>>>> + } >>>>> + return -EINVAL; >>>>> +} >>>>> + >>>>> +static int kmx61_chip_init(struct kmx61_data *data) >>>>> +{ >>>>> + int ret; >>>>> + >>>>> + ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_WHO_AM_I); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "Error reading who_am_i\n"); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + if (ret != KMX61_CHIP_ID) { >>>>> + dev_err(&data->client->dev, >>>>> + "Wrong chip id, got %x expected %x\n", >>>>> + ret, KMX61_CHIP_ID); >>>>> + return -EINVAL; >>>>> + } >>>>> + >>>>> + /* set accel 12bit, 4g range */ >>>>> + ret = kmx61_set_range(data, KMX61_RANGE_4G); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + /* set acc/magn to OPERATION mode */ >>>>> + ret = kmx61_set_mode(data, 0, KMX61_ACC | KMX61_MAG, true); >>>> Just return kmx61_set_mode(data, 0, KMX61_ACC | KMX61_MAG, true); >>> >>> Ok. >>> >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + return 0; >>>>> +} >>>>> +/** >>>>> + * kmx61_set_power_state() - set power state for kmx61 @device >>>>> + * @data - kmx61 device private pointer >>>>> + * @on - power state to be set for @device >>>>> + * @device - bitmask indicating device for which @on state needs to be set >>>>> + * >>>>> + * Notice that when ACC power state needs to be set to ON and MAG is in >>>>> + * OPERATION then we know that kmx61_runtime_resume was already called >>>>> + * so we must set ACC OPERATION mode here. The same happens when MAG power >>>>> + * state needs to be set to ON and ACC is in OPERATION. >>>>> + */ >>>>> +static int kmx61_set_power_state(struct kmx61_data *data, bool on, u8 device) >>>>> +{ >>>>> +#ifdef CONFIG_PM_RUNTIME >>>>> + int ret; >>>>> + >>>>> + if (device & KMX61_ACC) { >>>>> + if (on && !data->acc_ps && !data->mag_stby) >>>>> + kmx61_set_mode(data, 0, KMX61_ACC, true); >>>>> + data->acc_ps = on; >>>>> + } >>>>> + if (device & KMX61_MAG) { >>>>> + if (on && !data->mag_ps && !data->acc_stby) >>>>> + kmx61_set_mode(data, 0, KMX61_MAG, true); >>>>> + data->mag_ps = on; >>>>> + } >>>>> + >>>>> + if (on) { >>>>> + ret = pm_runtime_get_sync(&data->client->dev); >>>>> + } else { >>>>> + pm_runtime_mark_last_busy(&data->client->dev); >>>>> + ret = pm_runtime_put_autosuspend(&data->client->dev); >>>>> + } >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, >>>>> + "Failed: kmx61_set_power_state for %d, ret %d\n", >>>>> + on, ret); >>>>> + return ret; >>>>> + } >>>>> +#endif >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int kmx61_read_measurement(struct kmx61_data *data, int base, int offset) >>>> u8 base, u8 offset? >>> >>> Correct. >>> >>>>> +{ >>>>> + int ret; >>>>> + u8 reg = base + offset * 2; >>>>> + >>>>> + ret = i2c_smbus_read_word_data(data->client, reg); >>>>> + if (ret < 0) { >>>>> + dev_err(&data->client->dev, "failed to read reg at %x\n", reg); >>>>> + return ret; >>>> This return is unnecessary. >>> >>> Ok. >>> >>>>> + } >>>>> + >>>>> + return ret; >>>>> +} >>>>> + >>>>> +static int kmx61_read_raw(struct iio_dev *indio_dev, >>>>> + struct iio_chan_spec const *chan, int *val, >>>>> + int *val2, long mask) >>>> Indentation of the parameters is a bit too high. >>> >>> Ok, will fix. >>> >>>>> +{ >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + int ret; >>>>> + u8 base_reg; >>>>> + >>>>> + switch (mask) { >>>>> + case IIO_CHAN_INFO_RAW: >>>>> + switch (chan->type) { >>>>> + case IIO_ACCEL: >>>>> + case IIO_MAGN: >>>>> + base_reg = KMX61_ACC_XOUT_L; >>>>> + break; >>>>> + default: >>>>> + return -EINVAL; >>>>> + } >>>>> + mutex_lock(&data->lock); >>>>> + >>>>> + kmx61_set_power_state(data, true, chan->address); >>>>> + ret = kmx61_read_measurement(data, base_reg, chan->scan_index); >>>>> + if (ret < 0) { >>>>> + kmx61_set_power_state(data, false, chan->address); >>>>> + mutex_unlock(&data->lock); >>>>> + return ret; >>>>> + } >>>>> + *val = sign_extend32(ret >> chan->scan_type.shift, >>>>> + chan->scan_type.realbits - 1); >>>>> + kmx61_set_power_state(data, false, chan->address); >>>>> + >>>>> + mutex_unlock(&data->lock); >>>>> + return IIO_VAL_INT; >>>>> + case IIO_CHAN_INFO_SCALE: >>>>> + switch (chan->type) { >>>>> + case IIO_ACCEL: >>>>> + *val = 0; >>>>> + *val2 = kmx61_scale_table[data->range].uscale; >>>>> + return IIO_VAL_INT_PLUS_MICRO; >>>>> + case IIO_MAGN: >>>>> + /* 14 bits res, 1465 microGauss per magn count */ >>>>> + *val = 0; >>>>> + *val2 = 1465; >>>>> + return IIO_VAL_INT_PLUS_MICRO; >>>>> + default: >>>>> + return -EINVAL; >>>>> + } >>>>> + case IIO_CHAN_INFO_SAMP_FREQ: >>>>> + if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN) >>>>> + return -EINVAL; >>>>> + >>>>> + mutex_lock(&data->lock); >>>>> + ret = kmx61_get_odr(data, val, val2, chan->address); >>>>> + mutex_unlock(&data->lock); >>>> Could be just return ret here, if kmx61_get_odr() returns IIO_VAL_INT_PLUS_MICRO on success and -EINVAL on error. >>> >>> As explained above, I prefer not to do this. More than that, I can't do ret here >>> because the data->lock is held. >>> >> Well, I actually intended to have an unconditional "return ret;" right after the mutex_unlock. But up to you. I also see a good point to make it obvious here, that the return value is IIO_VAL_INT_PLUS_MICRO. So, up to you. >>>>> + if (ret) >>>>> + return -EINVAL; >>>>> + return IIO_VAL_INT_PLUS_MICRO; >>>>> + } >>>>> + return -EINVAL; >>>>> +} >>>>> + >>>>> +static int kmx61_write_raw(struct iio_dev *indio_dev, >>>>> + struct iio_chan_spec const *chan, int val, >>>>> + int val2, long mask) >>>> Indentation of parameters is too high. >>> Ok. >>>>> +{ >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + int ret; >>>>> + >>>>> + switch (mask) { >>>>> + case IIO_CHAN_INFO_SAMP_FREQ: >>>>> + if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN) >>>>> + return -EINVAL; >>>>> + >>>>> + mutex_lock(&data->lock); >>>>> + ret = kmx61_set_odr(data, val, val2, chan->address); >>>>> + mutex_unlock(&data->lock); >>>>> + return ret; >>>>> + case IIO_CHAN_INFO_SCALE: >>>>> + switch (chan->type) { >>>>> + case IIO_ACCEL: >>>>> + if (val != 0) >>>>> + return -EINVAL; >>>>> + mutex_lock(&data->lock); >>>>> + ret = kmx61_set_scale(data, val2); >>>>> + mutex_unlock(&data->lock); >>>>> + return ret; >>>>> + default: >>>>> + return -EINVAL; >>>>> + } >>>>> + return ret; >>>> This won't be reached (if so, ret would not be initialized). >>>>> + default: >>>>> + return -EINVAL; >>>>> + } >>>>> + return ret; >>>> Same here. >>> >>> I know. Would initializing ret with 0 will be enough? >> Since the switch already catches all cases and returns, there is no need for return ret, here. But if you prefer to have a return at the end of the function, you could drop the default case, or leave it empty, or just put a break in there - and return -EINVAL at the end. > > Ok. I will remove the the unnecessary return. > >>> >>>>> +} >>>>> + >>>>> +static const struct iio_info kmx61_info = { >>>>> + .driver_module = THIS_MODULE, >>>>> + .read_raw = kmx61_read_raw, >>>>> + .write_raw = kmx61_write_raw, >>>>> + .attrs = &kmx61_attribute_group, >>>>> +}; >>>>> + >>>>> +static int kmx61_probe(struct i2c_client *client, >>>>> + const struct i2c_device_id *id) >>>>> +{ >>>>> + struct kmx61_data *data; >>>>> + struct iio_dev *indio_dev; >>>>> + int ret; >>>>> + const char *name = NULL; >>>>> + >>>>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); >>>>> + if (!indio_dev) >>>>> + return -ENOMEM; >>>>> + >>>>> + data = iio_priv(indio_dev); >>>>> + i2c_set_clientdata(client, indio_dev); >>>>> + data->client = client; >>>>> + >>>>> + if (id) >>>>> + name = id->name; >>>>> + >>>>> + indio_dev->dev.parent = &client->dev; >>>>> + indio_dev->channels = kmx61_channels; >>>>> + indio_dev->num_channels = ARRAY_SIZE(kmx61_channels); >>>>> + indio_dev->name = name; >>>>> + indio_dev->modes = INDIO_DIRECT_MODE; >>>>> + indio_dev->info = &kmx61_info; >>>>> + >>>>> + mutex_init(&data->lock); >>>>> + >>>>> + ret = kmx61_chip_init(data); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + ret = iio_device_register(indio_dev); >>>>> + if (ret < 0) { >>>>> + dev_err(&client->dev, "Failed to register iio device\n"); >>>>> + goto err_iio_device_register; >>>>> + } >>>>> + >>>>> + ret = pm_runtime_set_active(&client->dev); >>>>> + if (ret < 0) >>>>> + goto err_pm_runtime_set_active; >>>>> + >>>>> + pm_runtime_enable(&client->dev); >>>>> + pm_runtime_set_autosuspend_delay(&client->dev, KMX61_SLEEP_DELAY_MS); >>>>> + pm_runtime_use_autosuspend(&client->dev); >>>>> + >>>>> + return 0; >>>>> + >>>>> +err_pm_runtime_set_active: >>>>> + iio_device_unregister(indio_dev); >>>>> +err_iio_device_register: >>>>> + kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true); >>>>> + return ret; >>>>> +} >>>>> + >>>>> +static int kmx61_remove(struct i2c_client *client) >>>>> +{ >>>>> + struct iio_dev *indio_dev = i2c_get_clientdata(client); >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + int ret; >>>>> + >>>>> + pm_runtime_disable(&client->dev); >>>>> + pm_runtime_set_suspended(&client->dev); >>>>> + pm_runtime_put_noidle(&client->dev); >>>>> + >>>>> + iio_device_unregister(indio_dev); >>>>> + >>>>> + mutex_lock(&data->lock); >>>>> + ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true); >>>>> + mutex_unlock(&data->lock); >>>>> + >>>>> + return ret; >>>>> +} >>>>> + >>>>> +#ifdef CONFIG_PM_SLEEP >>>>> +static int kmx61_suspend(struct device *dev) >>>>> +{ >>>>> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + int ret; >>>>> + >>>>> + mutex_lock(&data->lock); >>>>> + ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, >>>>> + false); >>>>> + mutex_unlock(&data->lock); >>>>> + >>>>> + return ret; >>>>> +} >>>>> + >>>>> +static int kmx61_resume(struct device *dev) >>>>> +{ >>>>> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + u8 stby = 0; >>>>> + >>>>> + if (data->acc_stby) >>>>> + stby |= KMX61_ACC_STBY_BIT; >>>>> + if (data->mag_stby) >>>>> + stby |= KMX61_MAG_STBY_BIT; >>>>> + >>>>> + return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true); >>>>> +} >>>>> +#endif >>>>> + >>>>> +#ifdef CONFIG_PM_RUNTIME >>>>> +static int kmx61_runtime_suspend(struct device *dev) >>>>> +{ >>>>> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + int ret; >>>>> + >>>>> + mutex_lock(&data->lock); >>>>> + ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true); >>>>> + mutex_unlock(&data->lock); >>>>> + >>>>> + return ret; >>>>> +} >>>>> + >>>>> +static int kmx61_runtime_resume(struct device *dev) >>>>> +{ >>>>> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); >>>>> + struct kmx61_data *data = iio_priv(indio_dev); >>>>> + u8 stby = 0; >>>>> + >>>>> + if (!data->acc_ps) >>>>> + stby |= KMX61_ACC_STBY_BIT; >>>>> + if (!data->mag_ps) >>>>> + stby |= KMX61_MAG_STBY_BIT; >>>>> + >>>>> + return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true); >>>>> +} >>>>> +#endif >>>>> + >>>>> +static const struct dev_pm_ops kmx61_pm_ops = { >>>>> + SET_SYSTEM_SLEEP_PM_OPS(kmx61_suspend, kmx61_resume) >>>>> + SET_RUNTIME_PM_OPS(kmx61_runtime_suspend, kmx61_runtime_resume, NULL) >>>>> +}; >>>>> + >>>>> +static const struct i2c_device_id kmx61_id[] = { >>>>> + {"kmx611021", 0}, >>>>> + {} >>>>> +}; >>>>> + >>>>> +MODULE_DEVICE_TABLE(i2c, kmx61_id); >>>>> + >>>>> +static struct i2c_driver kmx61_driver = { >>>>> + .driver = { >>>>> + .name = KMX61_DRV_NAME, >>>>> + .pm = &kmx61_pm_ops, >>>>> + }, >>>>> + .probe = kmx61_probe, >>>>> + .remove = kmx61_remove, >>>>> + .id_table = kmx61_id, >>>>> +}; >>>>> + >>>>> +module_i2c_driver(kmx61_driver); >>>>> + >>>>> +MODULE_AUTHOR("Daniel Baluta "); >>>>> +MODULE_DESCRIPTION("KMX61 accelerometer/magnetometer driver"); >>>>> +MODULE_LICENSE("GPL v2"); >>> >>> Hartmut, thanks a lot for your reviews. I will send a patch series >>> with these cleanups together with changes for ACPI, buffer and trigger >>> support. >> Don't know if Jonathan would like to see it smashed together, already. >> Take care > > By together I mean separate patches in the same patch set. > > I will take Hmm, pressed send to early. I will take any suggestion on how to send this. Jonathan what do you think? Daniel. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/