Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752430AbaKZGWc (ORCPT ); Wed, 26 Nov 2014 01:22:32 -0500 Received: from mail-oi0-f44.google.com ([209.85.218.44]:45246 "EHLO mail-oi0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752364AbaKZGWa (ORCPT ); Wed, 26 Nov 2014 01:22:30 -0500 MIME-Version: 1.0 In-Reply-To: <1416944441-12066-3-git-send-email-sbranden@broadcom.com> References: <1416944441-12066-1-git-send-email-sbranden@broadcom.com> <1416944441-12066-3-git-send-email-sbranden@broadcom.com> Date: Tue, 25 Nov 2014 22:22:30 -0800 Message-ID: Subject: Re: [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change From: Tim Kryger To: Scott Branden Cc: Thierry Reding , Ray Jui , Arun Ramamurthy , bcm-kernel-feedback-list@broadcom.com, linux-pwm@vger.kernel.org, Linux Kernel Mailing List Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Nov 25, 2014 at 11:40 AM, Scott Branden wrote: > From: Arun Ramamurthy > > The pwm core code requires a separate call for enabling the channel > and hence the driver does not need to set pwm_trigger after a > polarity change The framework does restrict when polarity changes can occur but it isn't clear to me that there is any reason to delay applying the polarity change. Keep in mind that polarity matters even when a PWM is disabled. While disabled, the output should be equivalent to an enabled configuration with zero duty. Thus for normal polarity the output is constant low and for inversed polarity the output is constant high. I believe there is an expectation that the output is updated to reflect the requested polarity change prior to returning to the caller. > > Signed-off-by: Arun Ramamurthy > Reviewed-by: Ray Jui > Signed-off-by: Scott Branden > --- > drivers/pwm/pwm-bcm-kona.c | 5 ----- > 1 file changed, 5 deletions(-) > > diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c > index 29eef9e..fa0b5bf 100644 > --- a/drivers/pwm/pwm-bcm-kona.c > +++ b/drivers/pwm/pwm-bcm-kona.c > @@ -173,11 +173,6 @@ static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, > > writel(value, kp->base + PWM_CONTROL_OFFSET); > > - kona_pwmc_apply_settings(kp, chan); > - > - /* Wait for waveform to settle before gating off the clock */ > - ndelay(400); > - > clk_disable_unprepare(kp->clk); > > return 0; > -- > 2.1.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/