Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751218AbaK1Dk1 (ORCPT ); Thu, 27 Nov 2014 22:40:27 -0500 Received: from mail-qg0-f49.google.com ([209.85.192.49]:45888 "EHLO mail-qg0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750792AbaK1DkZ (ORCPT ); Thu, 27 Nov 2014 22:40:25 -0500 MIME-Version: 1.0 In-Reply-To: References: <1416834381-11314-1-git-send-email-gautam.vivek@samsung.com> Date: Fri, 28 Nov 2014 09:10:24 +0530 Message-ID: Subject: Re: [PATCH V2 2/2] arm64: exynos: Add bus1 pinctrl node on exynos7 From: Vivek Gautam To: Kukjin Kim Cc: Alim Akhtar , Vivek Gautam , "linux-kernel@vger.kernel.org" , "linux-samsung-soc@vger.kernel.org" , linux-usb , "devicetree@vger.kernel.org" , Tomasz Figa , Sylwester Nawrocki , "robh+dt" , Linus Walleij , Alim Akhtar Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Kukjin, On Wed, Nov 26, 2014 at 6:59 PM, Alim Akhtar wrote: > Hi Vivek, > > On Mon, Nov 24, 2014 at 6:36 PM, Vivek Gautam wrote: >> BUS1 pinctrl provides gpios for usb and power regulator >> available on exynos7-espresso board. So add relevant device >> node for pinctrl-bus1. >> >> Signed-off-by: Naveen Krishna Ch >> Signed-off-by: Vivek Gautam >> --- We can pick this up for 3.19 rc1 ? >> > Looks good to me. > Reviewed-by: Alim Akhtar > >> This patch was part of series: >> "[PATCH 00/11] Exynos7: Adding USB 3.0 support" >> https://lkml.org/lkml/2014/11/21/247 >> >> Changes since V1: >> - Added support for all pin banks which are part of BUS1 pin controller. >> >> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 82 +++++++++++++++++++++++ >> arch/arm64/boot/dts/exynos/exynos7.dtsi | 7 ++ >> 2 files changed, 89 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi >> index 2eef4a2..c367f0a 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi >> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi >> @@ -335,6 +335,88 @@ >> }; >> }; >> >> +&pinctrl_bus1 { >> + gpf0: gpf0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf1: gpf1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf2: gpf2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf3: gpf3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf4: gpf4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf5: gpf5 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg1: gpg1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg2: gpg2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gph1: gph1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpv6: gpv6 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> + >> &pinctrl_nfc { >> gpj0: gpj0 { >> gpio-controller; >> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi >> index 1d9e4c9..e633b02 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi >> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi >> @@ -26,6 +26,7 @@ >> pinctrl5 = &pinctrl_ese; >> pinctrl6 = &pinctrl_fsys0; >> pinctrl7 = &pinctrl_fsys1; >> + pinctrl8 = &pinctrl_bus1; >> }; >> >> cpus { >> @@ -242,6 +243,12 @@ >> interrupts = <0 383 0>; >> }; >> >> + pinctrl_bus1: pinctrl@14870000 { >> + compatible = "samsung,exynos7-pinctrl"; >> + reg = <0x14870000 0x1000>; >> + interrupts = <0 384 0>; >> + }; >> + >> pinctrl_nfc: pinctrl@14cd0000 { >> compatible = "samsung,exynos7-pinctrl"; >> reg = <0x14cd0000 0x1000>; >> -- >> 1.7.10.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > Regards, > Alim > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/