Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751232AbaK1Uwx (ORCPT ); Fri, 28 Nov 2014 15:52:53 -0500 Received: from mout.kundenserver.de ([212.227.126.187]:59664 "EHLO mout.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751095AbaK1Uwu (ORCPT ); Fri, 28 Nov 2014 15:52:50 -0500 From: Arnd Bergmann To: Nicolas Ferre Subject: Re: [GIT PULL] at91: cleanup for 3.19 #4 Date: Fri, 28 Nov 2014 21:52:08 +0100 User-Agent: KMail/1.12.2 (Linux/3.8.0-35-generic; KDE/4.3.2; x86_64; ; ) Cc: Olof Johansson , arm@kernel.org, Linux Kernel list , "linux-arm-kernel" , Alexandre Belloni , Boris BREZILLON , "Jean-Christophe PLAGNIOL-VILLARD" , Ludovic Desroches References: <1417176632-15929-1-git-send-email-nicolas.ferre@atmel.com> In-Reply-To: <1417176632-15929-1-git-send-email-nicolas.ferre@atmel.com> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <201411282152.08438.arnd@arndb.de> X-Provags-ID: V02:K0:0vzKaEibE1NABKDKm2do3ICT/uA4OSXpf19zW1fJ0mq K5HXSC99JFYYmA9oqQimSblRxXNbHUkJCFcTf2PjJc3dBsCF6v Woobm0MvJaKdK6Cz2LXNZuiV/7simfbv+a9G0p430CYpoXIeHn 6u1bItoERvgDo7Aco/YZQfGKwaZOEOdDkEnrxuJyv7kQ57oy/J dCdTrxxOvLsQZnwkU1CSBWyTT5ZtkjMI+Nxp/A44pSKrqWaCm7 zs8mSMTn+iFQp3pnPh++zq8KRKSjDxY76IMctk/6FbyVev5AxH CCJgVxcKzFjXQLnofdwbZ0V1YRjvXButNcuzs/zsXco6hsHrLn cC+afdbPtrp4wVLVRswQ9bQYtBlEr4iqeuraucPNz X-UI-Out-Filterresults: notjunk:1; Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Friday 28 November 2014, Nicolas Ferre wrote: > Arnd, Olof, Kevin, > > I think it's interesting to remove all the !DT stuff in one kernel revision, so > I'd like this pull-request to be integrated to 3.19 as well. > > This is the last series of patches that removes the non-Device-Tree board > support for older Atmel SoCs. > Several files beyond at91rm9200 are touched this time as I tried to remove the > biggest parts that were related to !DT SoC initializations. > > The diffstat is also pretty big as a lot of at91rm9200 boards were remaining. > > This PR is based on at91-cleanup3 that I sent a couple of days ago, so I think > that you can take both in a raw. > > Thanks, best regards, > > The following changes since commit 4fdfb67f24b64844ac110622bb51b2ee0f894492: > > ARM: at91/Kconfig: remove useless fbdev Kconfig options (2014-11-21 12:18:40 +0100) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git tags/at91-cleanup4 > > for you to fetch changes up to 4a109c50d1958a2783df01980b55508fe47bb79c: > > ARM: at91: remove unused IRQ function declarations (2014-11-27 16:33:06 +0100) > > ---------------------------------------------------------------- > Fourth batch of cleanup/SoC for 3.19: > - removal of legacy board support for the last SoC having board C files: at91rm9200 > - removal or modification of some Kconfig options > - switch to USE_OF for all the AT91 SoCs > - removal of the old AT91-specific clocks and IRQ drivers > I've pulled it into next/cleanup and played a little more with it, lookig for more obsolete code, and whatever is still needed for multiplatform support. Please have a look at the patch below and see if you still want to submit some of the cleanups for 3.19. I'd certainly still take some of the dead code elimination. The driver changes below are all trivial, you may want to send that to the respective subsystem maintainers to simplify the step of turning on ARCH_MULTIPLATFORM in 3.20. The multiplatform support is just for demonstration, and we should probably do as discussed and not introduce the ARCH_AT91_SINGLE option, although we could also do it if you really want to. Finally, I found one bug: at91sam9261_ioremap_registers was removed and now nothing calls at91_ioremap_matrix(), but the udc driver still accesses it. This means that the at91_udc driver is already broken on sam9261 and sam9g10 with DT, independent of multiplatform or not. You may want to fix that. Thanks! Signed-off-by: Arnd Bergmann arch/arm/Kconfig | 2 +- arch/arm/mach-at91/Kconfig | 28 +- arch/arm/mach-at91/Makefile | 7 +- arch/arm/mach-at91/at91rm9200_time.c | 23 - arch/arm/mach-at91/board-dt-sam9.c | 1 - arch/arm/mach-at91/board.h | 123 --- arch/arm/mach-at91/generic.h | 36 - arch/arm/mach-at91/gpio.c | 982 ------------------------ arch/arm/mach-at91/gpio.h | 214 ------ arch/arm/mach-at91/include/mach/atmel-mci.h | 17 - arch/arm/mach-at91/include/mach/cpu.h | 2 - arch/arm/mach-at91/leds.c | 56 -- arch/arm/mach-at91/pm.c | 11 +- arch/arm/mach-at91/setup.c | 96 +-- arch/arm/mach-at91/soc.h | 6 - arch/avr32/mach-at32ap/at32ap700x.c | 1 - arch/avr32/mach-at32ap/include/mach/atmel-mci.h | 17 - drivers/ata/Kconfig | 2 +- drivers/clocksource/timer-atmel-pit.c | 32 - drivers/mmc/host/atmel-mci.c | 1 - drivers/pcmcia/Kconfig | 2 +- drivers/pinctrl/pinctrl-at91.c | 4 +- drivers/rtc/rtc-at91sam9.c | 21 +- drivers/usb/gadget/udc/Kconfig | 2 +- drivers/usb/host/ohci-at91.c | 4 - include/linux/atmel-mci.h | 12 + sound/atmel/ac97c.c | 6 +- sound/soc/atmel/sam9g20_wm8731.c | 1 - 28 files changed, 71 insertions(+), 1638 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fd4515ca8358..b446e953f8d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -371,7 +371,7 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. -config ARCH_AT91 +config ARCH_AT91_SINGLE bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 231893d71658..6475587f48bc 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,3 +1,15 @@ +config ARCH_AT91 + bool "Atmel AT91" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V7 + default ARCH_AT91_SINGLE + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select IRQ_DOMAIN + select PINCTRL + select PINCTRL_AT91 + help + This enables support for systems based on Atmel + AT91RM9200, AT91SAM9 and SAMA5 processors. + if ARCH_AT91 config HAVE_AT91_UTMI @@ -52,12 +64,14 @@ choice config SOC_SAM_V4_V5 bool "ARM9 AT91SAM9/AT91RM9200" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V4_V5 help Select this if you are using one of Atmel's AT91SAM9 or AT91RM9200 SoC. config SOC_SAM_V7 bool "Cortex A5" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V7 help Select this if you are using one of Atmel's SAMA5D3 SoC. @@ -97,6 +111,7 @@ endif if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V4 select ATMEL_AIC_IRQ select COMMON_CLK_AT91 select CPU_ARM920T @@ -106,6 +121,7 @@ config SOC_AT91RM9200 config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU0 select SOC_AT91SAM9 select HAVE_AT91_USB_CLK @@ -115,6 +131,7 @@ config SOC_AT91SAM9260 config SOC_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 @@ -124,6 +141,7 @@ config SOC_AT91SAM9261 config SOC_AT91SAM9263 bool "AT91SAM9263" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select SOC_AT91SAM9 @@ -131,6 +149,7 @@ config SOC_AT91SAM9263 config SOC_AT91SAM9RL bool "AT91SAM9RL" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 @@ -138,6 +157,7 @@ config SOC_AT91SAM9RL config SOC_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10 families" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select SOC_AT91SAM9 @@ -149,6 +169,7 @@ config SOC_AT91SAM9G45 config SOC_AT91SAM9X5 bool "AT91SAM9x5 family" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 @@ -164,6 +185,7 @@ config SOC_AT91SAM9X5 config SOC_AT91SAM9N12 bool "AT91SAM9N12 family" + depends on ARCH_AT91_SINGLE || ARCH_MULTI_V5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 @@ -177,15 +199,13 @@ endif # SOC_SAM_V4_V5 comment "Generic Board Type" config MACH_AT91RM9200_DT - bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" - depends on SOC_AT91RM9200 + def_bool SOC_AT91RM9200 help Select this if you want to experiment device-tree with an Atmel RM9200 Evaluation Kit. config MACH_AT91SAM9_DT - bool "Atmel AT91SAM Evaluation Kits with device-tree support" - depends on SOC_AT91SAM9 + def_bool SOC_AT91SAM9 help Select this if you want to experiment device-tree with an Atmel Evaluation Kit. diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 2371b8845bf5..e58a7363dc8c 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,8 +1,10 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include +asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-y := gpio.o setup.o sysirq_mask.o +obj-y := setup.o sysirq_mask.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o @@ -25,9 +27,6 @@ obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o # SAMA5 board with device-tree obj-$(CONFIG_SOC_SAMA5) += board-dt-sama5.o -# Drivers -obj-y += leds.o - # Power Management obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 7fd13aef9827..51761f8927b7 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -183,7 +183,6 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); -#ifdef CONFIG_OF static struct of_device_id at91rm9200_st_timer_ids[] = { { .compatible = "atmel,at91rm9200-st" }, { /* sentinel */ } @@ -219,28 +218,6 @@ node_err: err: return -EINVAL; } -#else -static int __init of_at91rm9200_st_init(void) -{ - return -EINVAL; -} -#endif - -void __init at91rm9200_ioremap_st(u32 addr) -{ -#ifdef CONFIG_OF - struct device_node *np; - - np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); - if (np) { - of_node_put(np); - return; - } -#endif - at91_st_base = ioremap(addr, 256); - if (!at91_st_base) - panic("Impossible to ioremap ST\n"); -} /* * ST (system timer) module supports both clockevents and clocksource. diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 67c1bcbf0ed9..f99246aa9b38 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -21,7 +21,6 @@ #include #include -#include "board.h" #include "generic.h" static const char *at91_dt_board_compat[] __initdata = { diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h deleted file mode 100644 index d268ec3781dd..000000000000 --- a/arch/arm/mach-at91/board.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/board.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * These are data structures found in platform_device.dev.platform_data, - * and describing board-specific data needed by drivers. For example, - * which pin is used for a given GPIO role. - * - * In 2.6, drivers should strongly avoid board-specific knowledge so - * that supporting new boards normally won't require driver patches. - * Most board-specific knowledge should be in arch/.../board-*.c files. - */ - -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include - - /* USB Device */ -extern void __init at91_add_device_udc(struct at91_udc_data *data); - - /* USB High Speed Device */ -extern void __init at91_add_device_usba(struct usba_platform_data *data); - - /* Compact Flash */ -extern void __init at91_add_device_cf(struct at91_cf_data *data); - - /* MMC / SD */ - /* atmel-mci platform config */ -extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); - -extern void __init at91_add_device_eth(struct macb_platform_data *data); - - /* USB Host */ -extern void __init at91_add_device_usbh(struct at91_usbh_data *data); -extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); -extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); - -extern void __init at91_add_device_nand(struct atmel_nand_data *data); - - /* I2C*/ -extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); - - /* SPI */ -extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - - /* Serial */ -#define ATMEL_UART_CTS 0x01 -#define ATMEL_UART_RTS 0x02 -#define ATMEL_UART_DSR 0x04 -#define ATMEL_UART_DTR 0x08 -#define ATMEL_UART_DCD 0x10 -#define ATMEL_UART_RI 0x20 - -extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); - -extern struct platform_device *atmel_default_console_device; - -extern void __init at91_add_device_serial(void); - -/* - * PWM - */ -#define AT91_PWM0 0 -#define AT91_PWM1 1 -#define AT91_PWM2 2 -#define AT91_PWM3 3 - -extern void __init at91_add_device_pwm(u32 mask); - -/* - * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC - * platform devices. Their SSC ID is part of their configuration data, - * along with information about which SSC signals they should use. - */ -#define ATMEL_SSC_TK 0x01 -#define ATMEL_SSC_TF 0x02 -#define ATMEL_SSC_TD 0x04 -#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) - -#define ATMEL_SSC_RK 0x10 -#define ATMEL_SSC_RF 0x20 -#define ATMEL_SSC_RD 0x40 -#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) - -extern void __init at91_add_device_ssc(unsigned id, unsigned pins); - - /* LCD Controller */ -struct atmel_lcdfb_pdata; -extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data); - - /* AC97 */ -extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); - - /* ISI */ -struct isi_platform_data; -extern void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck); - -/* CAN */ -extern void __init at91_add_device_can(struct at91_can_data *data); - - /* LEDs */ -extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); - -#endif diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index eb81940f9848..0fff39e85f76 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -21,53 +21,17 @@ extern void __init at91_init_sram(int bank, unsigned long base, unsigned int length); /* Processors */ -extern void __init at91rm9200_set_type(int type); -extern void __init at91_initialize(unsigned long main_clock); extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ -extern void __init at91_init_irq_default(void); -extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91_sysirq_mask_rtc(u32 rtc_base); extern void __init at91_sysirq_mask_rtt(u32 rtt_base); - /* Devices */ -extern void __init at91_register_devices(void); - /* Timer */ -extern void __init at91_init_time(void); -extern void at91rm9200_ioremap_st(u32 addr); extern void at91rm9200_timer_init(void); -extern void at91sam926x_ioremap_pit(u32 addr); -extern void at91sam926x_pit_init(int irq); - - /* Power Management */ -extern void at91_irq_suspend(void); -extern void at91_irq_resume(void); /* idle */ extern void at91sam9_idle(void); -/* Matrix */ -extern void at91_ioremap_matrix(u32 base_addr); - -/* Ram Controler */ -extern void at91_ioremap_ramc(int id, u32 addr, u32 size); - - /* GPIO */ -#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ -#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ - -struct at91_gpio_bank { - unsigned short id; /* peripheral ID */ - unsigned long regbase; /* offset from system peripheral base */ -}; -extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); -extern void __init at91_gpio_irq_setup(void); -extern int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent); - -extern u32 at91_get_extern_irq(void); - #endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c deleted file mode 100644 index d3f05aaad8ba..000000000000 --- a/arch/arm/mach-at91/gpio.c +++ /dev/null @@ -1,982 +0,0 @@ -/* - * linux/arch/arm/mach-at91/gpio.c - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "generic.h" -#include "gpio.h" - -#define MAX_NB_GPIO_PER_BANK 32 - -struct at91_gpio_chip { - struct gpio_chip chip; - struct at91_gpio_chip *next; /* Bank sharing same clock */ - int pioc_hwirq; /* PIO bank interrupt identifier on AIC */ - int pioc_virq; /* PIO bank Linux virtual interrupt */ - int pioc_idx; /* PIO bank index */ - void __iomem *regbase; /* PIO bank virtual address */ - struct clk *clock; /* associated clock */ - struct irq_domain *domain; /* associated irq domain */ -}; - -#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) - -static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); -static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); -static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); -static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); -static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset); -static int at91_gpiolib_direction_output(struct gpio_chip *chip, - unsigned offset, int val); -static int at91_gpiolib_direction_input(struct gpio_chip *chip, - unsigned offset); -static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); - -#define AT91_GPIO_CHIP(name) \ - { \ - .chip = { \ - .label = name, \ - .request = at91_gpiolib_request, \ - .get_direction = at91_gpiolib_get_direction, \ - .direction_input = at91_gpiolib_direction_input, \ - .direction_output = at91_gpiolib_direction_output, \ - .get = at91_gpiolib_get, \ - .set = at91_gpiolib_set, \ - .dbg_show = at91_gpiolib_dbg_show, \ - .to_irq = at91_gpiolib_to_irq, \ - .ngpio = MAX_NB_GPIO_PER_BANK, \ - }, \ - } - -static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA"), - AT91_GPIO_CHIP("pioB"), - AT91_GPIO_CHIP("pioC"), - AT91_GPIO_CHIP("pioD"), - AT91_GPIO_CHIP("pioE"), -}; - -static int gpio_banks; -static unsigned long at91_gpio_caps; - -/* All PIO controllers support PIO3 features */ -#define AT91_GPIO_CAP_PIO3 (1 << 0) - -#define has_pio3() (at91_gpio_caps & AT91_GPIO_CAP_PIO3) - -/*--------------------------------------------------------------------------*/ - -static inline void __iomem *pin_to_controller(unsigned pin) -{ - pin /= MAX_NB_GPIO_PER_BANK; - if (likely(pin < gpio_banks)) - return gpio_chip[pin].regbase; - - return NULL; -} - -static inline unsigned pin_to_mask(unsigned pin) -{ - return 1 << (pin % MAX_NB_GPIO_PER_BANK); -} - - -static char peripheral_function(void __iomem *pio, unsigned mask) -{ - char ret = 'X'; - u8 select; - - if (pio) { - if (has_pio3()) { - select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask); - select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1); - ret = 'A' + select; - } else { - ret = __raw_readl(pio + PIO_ABSR) & mask ? - 'B' : 'A'; - } - } - - return ret; -} - -/*--------------------------------------------------------------------------*/ - -/* Not all hardware capabilities are exposed through these calls; they - * only encapsulate the most common features and modes. (So if you - * want to change signals in groups, do it directly.) - * - * Bootloaders will usually handle some of the pin multiplexing setup. - * The intent is certainly that by the time Linux is fully booted, all - * pins should have been fully initialized. These setup calls should - * only be used by board setup routines, or possibly in driver probe(). - * - * For bootloaders doing all that setup, these calls could be inlined - * as NOPs so Linux won't duplicate any setup code - */ - - -/* - * mux the pin to the "GPIO" peripheral role. - */ -int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_PER); - return 0; -} -EXPORT_SYMBOL(at91_set_GPIO_periph); - - -/* - * mux the pin to the "A" internal peripheral role. - */ -int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - if (has_pio3()) { - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, - pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, - pio + PIO_ABCDSR2); - } else { - __raw_writel(mask, pio + PIO_ASR); - } - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_A_periph); - - -/* - * mux the pin to the "B" internal peripheral role. - */ -int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - if (has_pio3()) { - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, - pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, - pio + PIO_ABCDSR2); - } else { - __raw_writel(mask, pio + PIO_BSR); - } - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_B_periph); - - -/* - * mux the pin to the "C" internal peripheral role. - */ -int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_C_periph); - - -/* - * mux the pin to the "D" internal peripheral role. - */ -int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1); - __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); - __raw_writel(mask, pio + PIO_PDR); - return 0; -} -EXPORT_SYMBOL(at91_set_D_periph); - - -/* - * mux the pin to the gpio controller (instead of "A", "B", "C" - * or "D" peripheral), and configure it for an input. - */ -int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_ODR); - __raw_writel(mask, pio + PIO_PER); - return 0; -} -EXPORT_SYMBOL(at91_set_gpio_input); - - -/* - * mux the pin to the gpio controller (instead of "A", "B", "C" - * or "D" peripheral), and configure it for an output. - */ -int __init_or_module at91_set_gpio_output(unsigned pin, int value) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + PIO_IDR); - __raw_writel(mask, pio + PIO_PUDR); - __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); - __raw_writel(mask, pio + PIO_OER); - __raw_writel(mask, pio + PIO_PER); - return 0; -} -EXPORT_SYMBOL(at91_set_gpio_output); - - -/* - * enable/disable the glitch filter; mostly used with IRQ handling. - */ -int __init_or_module at91_set_deglitch(unsigned pin, int is_on) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - if (has_pio3() && is_on) - __raw_writel(mask, pio + PIO_IFSCDR); - __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); - return 0; -} -EXPORT_SYMBOL(at91_set_deglitch); - -/* - * enable/disable the debounce filter; - */ -int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - if (is_on) { - __raw_writel(mask, pio + PIO_IFSCER); - __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR); - __raw_writel(mask, pio + PIO_IFER); - } else { - __raw_writel(mask, pio + PIO_IFDR); - } - return 0; -} -EXPORT_SYMBOL(at91_set_debounce); - -/* - * enable/disable the multi-driver; This is only valid for output and - * allows the output pin to run as an open collector output. - */ -int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - - __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); - return 0; -} -EXPORT_SYMBOL(at91_set_multi_drive); - -/* - * enable/disable the pull-down. - * If pull-up already enabled while calling the function, we disable it. - */ -int __init_or_module at91_set_pulldown(unsigned pin, int is_on) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - /* Disable pull-up anyway */ - __raw_writel(mask, pio + PIO_PUDR); - __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR)); - return 0; -} -EXPORT_SYMBOL(at91_set_pulldown); - -/* - * disable Schmitt trigger - */ -int __init_or_module at91_disable_schmitt_trig(unsigned pin) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !has_pio3()) - return -EINVAL; - - __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT); - return 0; -} -EXPORT_SYMBOL(at91_disable_schmitt_trig); - -/* - * assuming the pin is muxed as a gpio output, set its value. - */ -int at91_set_gpio_value(unsigned pin, int value) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio) - return -EINVAL; - __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); - return 0; -} -EXPORT_SYMBOL(at91_set_gpio_value); - - -/* - * read the pin's value (works even if it's not muxed as a gpio). - */ -int at91_get_gpio_value(unsigned pin) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - u32 pdsr; - - if (!pio) - return -EINVAL; - pdsr = __raw_readl(pio + PIO_PDSR); - return (pdsr & mask) != 0; -} -EXPORT_SYMBOL(at91_get_gpio_value); - -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_PM - -static u32 wakeups[MAX_GPIO_BANKS]; -static u32 backups[MAX_GPIO_BANKS]; - -static int gpio_irq_set_wake(struct irq_data *d, unsigned state) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - unsigned mask = 1 << d->hwirq; - unsigned bank = at91_gpio->pioc_idx; - - if (unlikely(bank >= MAX_GPIO_BANKS)) - return -EINVAL; - - if (state) - wakeups[bank] |= mask; - else - wakeups[bank] &= ~mask; - - irq_set_irq_wake(at91_gpio->pioc_virq, state); - - return 0; -} - -void at91_gpio_suspend(void) -{ - int i; - - for (i = 0; i < gpio_banks; i++) { - void __iomem *pio = gpio_chip[i].regbase; - - backups[i] = __raw_readl(pio + PIO_IMR); - __raw_writel(backups[i], pio + PIO_IDR); - __raw_writel(wakeups[i], pio + PIO_IER); - - if (!wakeups[i]) { - clk_unprepare(gpio_chip[i].clock); - clk_disable(gpio_chip[i].clock); - } else { -#ifdef CONFIG_PM_DEBUG - printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); -#endif - } - } -} - -void at91_gpio_resume(void) -{ - int i; - - for (i = 0; i < gpio_banks; i++) { - void __iomem *pio = gpio_chip[i].regbase; - - if (!wakeups[i]) { - if (clk_prepare(gpio_chip[i].clock) == 0) - clk_enable(gpio_chip[i].clock); - } - - __raw_writel(wakeups[i], pio + PIO_IDR); - __raw_writel(backups[i], pio + PIO_IER); - } -} - -#else -#define gpio_irq_set_wake NULL -#endif - - -/* Several AIC controller irqs are dispatched through this GPIO handler. - * To use any AT91_PIN_* as an externally triggered IRQ, first call - * at91_set_gpio_input() then maybe enable its glitch filter. - * Then just request_irq() with the pin ID; it works like any ARM IRQ - * handler. - * First implementation always triggers on rising and falling edges - * whereas the newer PIO3 can be additionally configured to trigger on - * level, edge with any polarity. - * - * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after - * configuring them with at91_set_a_periph() or at91_set_b_periph(). - * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering. - */ - -static void gpio_irq_mask(struct irq_data *d) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << d->hwirq; - - if (pio) - __raw_writel(mask, pio + PIO_IDR); -} - -static void gpio_irq_unmask(struct irq_data *d) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << d->hwirq; - - if (pio) - __raw_writel(mask, pio + PIO_IER); -} - -static int gpio_irq_type(struct irq_data *d, unsigned type) -{ - switch (type) { - case IRQ_TYPE_NONE: - case IRQ_TYPE_EDGE_BOTH: - return 0; - default: - return -EINVAL; - } -} - -/* Alternate irq type for PIO3 support */ -static int alt_gpio_irq_type(struct irq_data *d, unsigned type) -{ - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << d->hwirq; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - __raw_writel(mask, pio + PIO_ESR); - __raw_writel(mask, pio + PIO_REHLSR); - break; - case IRQ_TYPE_EDGE_FALLING: - __raw_writel(mask, pio + PIO_ESR); - __raw_writel(mask, pio + PIO_FELLSR); - break; - case IRQ_TYPE_LEVEL_LOW: - __raw_writel(mask, pio + PIO_LSR); - __raw_writel(mask, pio + PIO_FELLSR); - break; - case IRQ_TYPE_LEVEL_HIGH: - __raw_writel(mask, pio + PIO_LSR); - __raw_writel(mask, pio + PIO_REHLSR); - break; - case IRQ_TYPE_EDGE_BOTH: - /* - * disable additional interrupt modes: - * fall back to default behavior - */ - __raw_writel(mask, pio + PIO_AIMDR); - return 0; - case IRQ_TYPE_NONE: - default: - pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq)); - return -EINVAL; - } - - /* enable additional interrupt modes */ - __raw_writel(mask, pio + PIO_AIMER); - - return 0; -} - -static struct irq_chip gpio_irqchip = { - .name = "GPIO", - .irq_disable = gpio_irq_mask, - .irq_mask = gpio_irq_mask, - .irq_unmask = gpio_irq_unmask, - /* .irq_set_type is set dynamically */ - .irq_set_wake = gpio_irq_set_wake, -}; - -static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct irq_data *idata = irq_desc_get_irq_data(desc); - struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); - void __iomem *pio = at91_gpio->regbase; - unsigned long isr; - int n; - - chained_irq_enter(chip, desc); - for (;;) { - /* Reading ISR acks pending (edge triggered) GPIO interrupts. - * When there none are pending, we're finished unless we need - * to process multiple banks (like ID_PIOCDE on sam9263). - */ - isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); - if (!isr) { - if (!at91_gpio->next) - break; - at91_gpio = at91_gpio->next; - pio = at91_gpio->regbase; - continue; - } - - n = find_first_bit(&isr, BITS_PER_LONG); - while (n < BITS_PER_LONG) { - generic_handle_irq(irq_find_mapping(at91_gpio->domain, n)); - n = find_next_bit(&isr, BITS_PER_LONG, n + 1); - } - } - chained_irq_exit(chip, desc); - /* now it may re-trigger */ -} - -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_DEBUG_FS - -static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask) -{ - char *trigger = NULL; - char *polarity = NULL; - - if (__raw_readl(pio + PIO_IMR) & mask) { - if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) { - trigger = "edge"; - polarity = "both"; - } else { - if (__raw_readl(pio + PIO_ELSR) & mask) { - trigger = "level"; - polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? - "high" : "low"; - } else { - trigger = "edge"; - polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? - "rising" : "falling"; - } - } - seq_printf(s, "IRQ:%s-%s\t", trigger, polarity); - } else { - seq_printf(s, "GPIO:%s\t\t", - __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); - } -} - -static int at91_gpio_show(struct seq_file *s, void *unused) -{ - int bank, j; - - /* print heading */ - seq_printf(s, "Pin\t"); - for (bank = 0; bank < gpio_banks; bank++) { - seq_printf(s, "PIO%c\t\t", 'A' + bank); - }; - seq_printf(s, "\n\n"); - - /* print pin status */ - for (j = 0; j < 32; j++) { - seq_printf(s, "%i:\t", j); - - for (bank = 0; bank < gpio_banks; bank++) { - unsigned pin = (32 * bank) + j; - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (__raw_readl(pio + PIO_PSR) & mask) - gpio_printf(s, pio, mask); - else - seq_printf(s, "%c\t\t", - peripheral_function(pio, mask)); - } - - seq_printf(s, "\n"); - } - - return 0; -} - -static int at91_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, at91_gpio_show, NULL); -} - -static const struct file_operations at91_gpio_operations = { - .open = at91_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init at91_gpio_debugfs_init(void) -{ - /* /sys/kernel/debug/at91_gpio */ - (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations); - return 0; -} -postcore_initcall(at91_gpio_debugfs_init); - -#endif - -/*--------------------------------------------------------------------------*/ - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -/* - * irqdomain initialization: pile up irqdomains on top of AIC range - */ -static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio) -{ - int irq_base; - - irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0); - if (irq_base < 0) - panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n", - at91_gpio->pioc_idx, irq_base); - at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio, - irq_base, 0, - &irq_domain_simple_ops, NULL); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain.\n", - at91_gpio->pioc_idx); -} - -/* - * Called from the processor-specific init to enable GPIO interrupt support. - */ -void __init at91_gpio_irq_setup(void) -{ - unsigned pioc; - int gpio_irqnbr = 0; - struct at91_gpio_chip *this, *prev; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - for (pioc = 0, this = gpio_chip, prev = NULL; - pioc++ < gpio_banks; - prev = this, this++) { - int offset; - - __raw_writel(~0, this->regbase + PIO_IDR); - - /* setup irq domain for this GPIO controller */ - at91_gpio_irqdomain(this); - - for (offset = 0; offset < this->chip.ngpio; offset++) { - unsigned int virq = irq_find_mapping(this->domain, offset); - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, this); - - gpio_irqnbr++; - } - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == this) - continue; - - this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq); - irq_set_chip_data(this->pioc_virq, this); - irq_set_chained_handler(this->pioc_virq, gpio_irq_handler); - } - pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks); -} - -/* gpiolib support */ -static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + PIO_PER); - return 0; -} - -static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - u32 osr; - - osr = __raw_readl(pio + PIO_OSR); - return !(osr & mask); -} - -static int at91_gpiolib_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + PIO_ODR); - return 0; -} - -static int at91_gpiolib_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); - __raw_writel(mask, pio + PIO_OER); - return 0; -} - -static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - u32 pdsr; - - pdsr = __raw_readl(pio + PIO_PDSR); - return (pdsr & mask) != 0; -} - -static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - void __iomem *pio = at91_gpio->regbase; - unsigned mask = 1 << offset; - - __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); -} - -static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - int i; - - for (i = 0; i < chip->ngpio; i++) { - unsigned pin = chip->base + i; - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - const char *gpio_label; - - gpio_label = gpiochip_is_requested(chip, i); - if (gpio_label) { - seq_printf(s, "[%s] GPIO%s%d: ", - gpio_label, chip->label, i); - if (__raw_readl(pio + PIO_PSR) & mask) - seq_printf(s, "[gpio] %s\n", - at91_get_gpio_value(pin) ? - "set" : "clear"); - else - seq_printf(s, "[periph %c]\n", - peripheral_function(pio, mask)); - } - } -} - -static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); - int virq; - - if (offset < chip->ngpio) - virq = irq_create_mapping(at91_gpio->domain, offset); - else - virq = -ENXIO; - - dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", - chip->label, offset + chip->base, virq); - return virq; -} - -static int __init at91_gpio_setup_clk(int idx) -{ - struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - - /* retreive PIO controller's clock */ - at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); - if (IS_ERR(at91_gpio->clock)) { - pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx); - goto err; - } - - if (clk_prepare(at91_gpio->clock)) - goto clk_prep_err; - - /* enable PIO controller's clock */ - if (clk_enable(at91_gpio->clock)) { - pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx); - goto clk_err; - } - - return 0; - -clk_err: - clk_unprepare(at91_gpio->clock); -clk_prep_err: - clk_put(at91_gpio->clock); -err: - return -EINVAL; -} - -static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) -{ - struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - - at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; - at91_gpio->pioc_hwirq = pioc_hwirq; - at91_gpio->pioc_idx = idx; - - at91_gpio->regbase = ioremap(regbase, 512); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx); - return; - } - - if (at91_gpio_setup_clk(idx)) - goto ioremap_err; - - gpio_banks = max(gpio_banks, idx + 1); - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -/* - * Called from the processor-specific init to enable GPIO pin support. - */ -void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) -{ - unsigned i; - struct at91_gpio_chip *at91_gpio, *last = NULL; - - BUG_ON(nr_banks > MAX_GPIO_BANKS); - - if (of_have_populated_dt()) - return; - - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - - for (i = 0; i < gpio_banks; i++) { - at91_gpio = &gpio_chip[i]; - - /* - * GPIO controller are grouped on some SoC: - * PIOC, PIOD and PIOE can share the same IRQ line - */ - if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq) - last->next = at91_gpio; - last = at91_gpio; - - gpiochip_add(&at91_gpio->chip); - } -} diff --git a/arch/arm/mach-at91/gpio.h b/arch/arm/mach-at91/gpio.h deleted file mode 100644 index eed465ab0dd7..000000000000 --- a/arch/arm/mach-at91/gpio.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/gpio.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_AT91RM9200_GPIO_H -#define __ASM_ARCH_AT91RM9200_GPIO_H - -#include -#include - -#define MAX_GPIO_BANKS 5 -#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32) - -/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ - -#define AT91_PIN_PA0 (0x00 + 0) -#define AT91_PIN_PA1 (0x00 + 1) -#define AT91_PIN_PA2 (0x00 + 2) -#define AT91_PIN_PA3 (0x00 + 3) -#define AT91_PIN_PA4 (0x00 + 4) -#define AT91_PIN_PA5 (0x00 + 5) -#define AT91_PIN_PA6 (0x00 + 6) -#define AT91_PIN_PA7 (0x00 + 7) -#define AT91_PIN_PA8 (0x00 + 8) -#define AT91_PIN_PA9 (0x00 + 9) -#define AT91_PIN_PA10 (0x00 + 10) -#define AT91_PIN_PA11 (0x00 + 11) -#define AT91_PIN_PA12 (0x00 + 12) -#define AT91_PIN_PA13 (0x00 + 13) -#define AT91_PIN_PA14 (0x00 + 14) -#define AT91_PIN_PA15 (0x00 + 15) -#define AT91_PIN_PA16 (0x00 + 16) -#define AT91_PIN_PA17 (0x00 + 17) -#define AT91_PIN_PA18 (0x00 + 18) -#define AT91_PIN_PA19 (0x00 + 19) -#define AT91_PIN_PA20 (0x00 + 20) -#define AT91_PIN_PA21 (0x00 + 21) -#define AT91_PIN_PA22 (0x00 + 22) -#define AT91_PIN_PA23 (0x00 + 23) -#define AT91_PIN_PA24 (0x00 + 24) -#define AT91_PIN_PA25 (0x00 + 25) -#define AT91_PIN_PA26 (0x00 + 26) -#define AT91_PIN_PA27 (0x00 + 27) -#define AT91_PIN_PA28 (0x00 + 28) -#define AT91_PIN_PA29 (0x00 + 29) -#define AT91_PIN_PA30 (0x00 + 30) -#define AT91_PIN_PA31 (0x00 + 31) - -#define AT91_PIN_PB0 (0x20 + 0) -#define AT91_PIN_PB1 (0x20 + 1) -#define AT91_PIN_PB2 (0x20 + 2) -#define AT91_PIN_PB3 (0x20 + 3) -#define AT91_PIN_PB4 (0x20 + 4) -#define AT91_PIN_PB5 (0x20 + 5) -#define AT91_PIN_PB6 (0x20 + 6) -#define AT91_PIN_PB7 (0x20 + 7) -#define AT91_PIN_PB8 (0x20 + 8) -#define AT91_PIN_PB9 (0x20 + 9) -#define AT91_PIN_PB10 (0x20 + 10) -#define AT91_PIN_PB11 (0x20 + 11) -#define AT91_PIN_PB12 (0x20 + 12) -#define AT91_PIN_PB13 (0x20 + 13) -#define AT91_PIN_PB14 (0x20 + 14) -#define AT91_PIN_PB15 (0x20 + 15) -#define AT91_PIN_PB16 (0x20 + 16) -#define AT91_PIN_PB17 (0x20 + 17) -#define AT91_PIN_PB18 (0x20 + 18) -#define AT91_PIN_PB19 (0x20 + 19) -#define AT91_PIN_PB20 (0x20 + 20) -#define AT91_PIN_PB21 (0x20 + 21) -#define AT91_PIN_PB22 (0x20 + 22) -#define AT91_PIN_PB23 (0x20 + 23) -#define AT91_PIN_PB24 (0x20 + 24) -#define AT91_PIN_PB25 (0x20 + 25) -#define AT91_PIN_PB26 (0x20 + 26) -#define AT91_PIN_PB27 (0x20 + 27) -#define AT91_PIN_PB28 (0x20 + 28) -#define AT91_PIN_PB29 (0x20 + 29) -#define AT91_PIN_PB30 (0x20 + 30) -#define AT91_PIN_PB31 (0x20 + 31) - -#define AT91_PIN_PC0 (0x40 + 0) -#define AT91_PIN_PC1 (0x40 + 1) -#define AT91_PIN_PC2 (0x40 + 2) -#define AT91_PIN_PC3 (0x40 + 3) -#define AT91_PIN_PC4 (0x40 + 4) -#define AT91_PIN_PC5 (0x40 + 5) -#define AT91_PIN_PC6 (0x40 + 6) -#define AT91_PIN_PC7 (0x40 + 7) -#define AT91_PIN_PC8 (0x40 + 8) -#define AT91_PIN_PC9 (0x40 + 9) -#define AT91_PIN_PC10 (0x40 + 10) -#define AT91_PIN_PC11 (0x40 + 11) -#define AT91_PIN_PC12 (0x40 + 12) -#define AT91_PIN_PC13 (0x40 + 13) -#define AT91_PIN_PC14 (0x40 + 14) -#define AT91_PIN_PC15 (0x40 + 15) -#define AT91_PIN_PC16 (0x40 + 16) -#define AT91_PIN_PC17 (0x40 + 17) -#define AT91_PIN_PC18 (0x40 + 18) -#define AT91_PIN_PC19 (0x40 + 19) -#define AT91_PIN_PC20 (0x40 + 20) -#define AT91_PIN_PC21 (0x40 + 21) -#define AT91_PIN_PC22 (0x40 + 22) -#define AT91_PIN_PC23 (0x40 + 23) -#define AT91_PIN_PC24 (0x40 + 24) -#define AT91_PIN_PC25 (0x40 + 25) -#define AT91_PIN_PC26 (0x40 + 26) -#define AT91_PIN_PC27 (0x40 + 27) -#define AT91_PIN_PC28 (0x40 + 28) -#define AT91_PIN_PC29 (0x40 + 29) -#define AT91_PIN_PC30 (0x40 + 30) -#define AT91_PIN_PC31 (0x40 + 31) - -#define AT91_PIN_PD0 (0x60 + 0) -#define AT91_PIN_PD1 (0x60 + 1) -#define AT91_PIN_PD2 (0x60 + 2) -#define AT91_PIN_PD3 (0x60 + 3) -#define AT91_PIN_PD4 (0x60 + 4) -#define AT91_PIN_PD5 (0x60 + 5) -#define AT91_PIN_PD6 (0x60 + 6) -#define AT91_PIN_PD7 (0x60 + 7) -#define AT91_PIN_PD8 (0x60 + 8) -#define AT91_PIN_PD9 (0x60 + 9) -#define AT91_PIN_PD10 (0x60 + 10) -#define AT91_PIN_PD11 (0x60 + 11) -#define AT91_PIN_PD12 (0x60 + 12) -#define AT91_PIN_PD13 (0x60 + 13) -#define AT91_PIN_PD14 (0x60 + 14) -#define AT91_PIN_PD15 (0x60 + 15) -#define AT91_PIN_PD16 (0x60 + 16) -#define AT91_PIN_PD17 (0x60 + 17) -#define AT91_PIN_PD18 (0x60 + 18) -#define AT91_PIN_PD19 (0x60 + 19) -#define AT91_PIN_PD20 (0x60 + 20) -#define AT91_PIN_PD21 (0x60 + 21) -#define AT91_PIN_PD22 (0x60 + 22) -#define AT91_PIN_PD23 (0x60 + 23) -#define AT91_PIN_PD24 (0x60 + 24) -#define AT91_PIN_PD25 (0x60 + 25) -#define AT91_PIN_PD26 (0x60 + 26) -#define AT91_PIN_PD27 (0x60 + 27) -#define AT91_PIN_PD28 (0x60 + 28) -#define AT91_PIN_PD29 (0x60 + 29) -#define AT91_PIN_PD30 (0x60 + 30) -#define AT91_PIN_PD31 (0x60 + 31) - -#define AT91_PIN_PE0 (0x80 + 0) -#define AT91_PIN_PE1 (0x80 + 1) -#define AT91_PIN_PE2 (0x80 + 2) -#define AT91_PIN_PE3 (0x80 + 3) -#define AT91_PIN_PE4 (0x80 + 4) -#define AT91_PIN_PE5 (0x80 + 5) -#define AT91_PIN_PE6 (0x80 + 6) -#define AT91_PIN_PE7 (0x80 + 7) -#define AT91_PIN_PE8 (0x80 + 8) -#define AT91_PIN_PE9 (0x80 + 9) -#define AT91_PIN_PE10 (0x80 + 10) -#define AT91_PIN_PE11 (0x80 + 11) -#define AT91_PIN_PE12 (0x80 + 12) -#define AT91_PIN_PE13 (0x80 + 13) -#define AT91_PIN_PE14 (0x80 + 14) -#define AT91_PIN_PE15 (0x80 + 15) -#define AT91_PIN_PE16 (0x80 + 16) -#define AT91_PIN_PE17 (0x80 + 17) -#define AT91_PIN_PE18 (0x80 + 18) -#define AT91_PIN_PE19 (0x80 + 19) -#define AT91_PIN_PE20 (0x80 + 20) -#define AT91_PIN_PE21 (0x80 + 21) -#define AT91_PIN_PE22 (0x80 + 22) -#define AT91_PIN_PE23 (0x80 + 23) -#define AT91_PIN_PE24 (0x80 + 24) -#define AT91_PIN_PE25 (0x80 + 25) -#define AT91_PIN_PE26 (0x80 + 26) -#define AT91_PIN_PE27 (0x80 + 27) -#define AT91_PIN_PE28 (0x80 + 28) -#define AT91_PIN_PE29 (0x80 + 29) -#define AT91_PIN_PE30 (0x80 + 30) -#define AT91_PIN_PE31 (0x80 + 31) - -#ifndef __ASSEMBLY__ -/* setup setup routines, called from board init or driver probe() */ -extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); -extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); -extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div); -extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); -extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on); -extern int __init_or_module at91_disable_schmitt_trig(unsigned pin); - -/* callable at any time */ -extern int at91_set_gpio_value(unsigned pin, int value); -extern int at91_get_gpio_value(unsigned pin); - -/* callable only from core power-management code */ -extern void at91_gpio_suspend(void); -extern void at91_gpio_resume(void); - -#endif /* __ASSEMBLY__ */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index 3069e4135573..e69de29bb2d1 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -1,17 +0,0 @@ -#ifndef __MACH_ATMEL_MCI_H -#define __MACH_ATMEL_MCI_H - -#include - -/** - * struct mci_dma_data - DMA data for MCI interface - */ -struct mci_dma_data { - struct at_dma_slave sdata; -}; - -/* accessor macros */ -#define slave_data_ptr(s) (&(s)->sdata) -#define find_slave_dev(s) ((s)->sdata.dma_dev) - -#endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 61914fb35f5d..438e64a613b8 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -134,8 +134,6 @@ struct at91_socinfo { }; extern struct at91_socinfo at91_soc_initdata; -const char *at91_get_soc_type(struct at91_socinfo *c); -const char *at91_get_soc_subtype(struct at91_socinfo *c); static inline int at91_soc_is_detected(void) { diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c deleted file mode 100644 index eb22e3357e87..000000000000 --- a/arch/arm/mach-at91/leds.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * LED driver for Atmel AT91-based boards. - * - * Copyright (C) SAN People (Pty) Ltd - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. -*/ - -#include -#include -#include -#include -#include - -#include "board.h" -#include "gpio.h" - - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_NEW_LEDS) - -/* - * New cross-platform LED support. - */ - -static struct gpio_led_platform_data led_data; - -static struct platform_device at91_gpio_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev.platform_data = &led_data, -}; - -void __init at91_gpio_leds(struct gpio_led *leds, int nr) -{ - int i; - - if (!nr) - return; - - for (i = 0; i < nr; i++) - at91_set_gpio_output(leds[i].gpio, leds[i].active_low); - - led_data.leds = leds; - led_data.num_leds = nr; - platform_device_register(&at91_gpio_leds_device); -} - -#else -void __init at91_gpio_leds(struct gpio_led *leds, int nr) {} -#endif - diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index a42360f69127..9b15169a1c62 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -31,7 +31,6 @@ #include "generic.h" #include "pm.h" -#include "gpio.h" static void (*at91_pm_standby)(void); @@ -130,10 +129,7 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - if (of_have_populated_dt()) - at91_pinctrl_gpio_suspend(); - else - at91_gpio_suspend(); + at91_pinctrl_gpio_suspend(); switch (state) { /* @@ -201,10 +197,7 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; - if (of_have_populated_dt()) - at91_pinctrl_gpio_resume(); - else - at91_gpio_resume(); + at91_pinctrl_gpio_resume(); return 0; } diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 6c3013e3309b..c15f4de92208 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -31,42 +31,9 @@ struct at91_init_soc __initdata at91_boot_soc; struct at91_socinfo at91_soc_initdata; EXPORT_SYMBOL(at91_soc_initdata); -void __init at91rm9200_set_type(int type) -{ - if (type == ARCH_REVISON_9200_PQFP) - at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; - else - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - - pr_info("filled in soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __init at91_init_irq_default(void) -{ - at91_init_interrupts(at91_boot_soc.default_irq_priority); -} - -void __init at91_init_interrupts(unsigned int *priority) -{ - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - void __iomem *at91_ramc_base[2]; EXPORT_SYMBOL_GPL(at91_ramc_base); -void __init at91_ioremap_ramc(int id, u32 addr, u32 size) -{ - if (id < 0 || id > 1) { - pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id); - BUG(); - } - at91_ramc_base[id] = ioremap(addr, size); - if (!at91_ramc_base[id]) - panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr); -} - static struct map_desc sram_desc[2] __initdata; void __init at91_init_sram(int bank, unsigned long base, unsigned int length) @@ -313,12 +280,6 @@ static const char *soc_name[] = { [AT91_SOC_UNKNOWN] = "Unknown", }; -const char *at91_get_soc_type(struct at91_socinfo *c) -{ - return soc_name[c->type]; -} -EXPORT_SYMBOL(at91_get_soc_type); - static const char *soc_subtype_name[] = { [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", @@ -345,12 +306,6 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", }; -const char *at91_get_soc_subtype(struct at91_socinfo *c) -{ - return soc_subtype_name[c->subtype]; -} -EXPORT_SYMBOL(at91_get_soc_subtype); - void __init at91_map_io(void) { /* Map peripherals */ @@ -366,11 +321,10 @@ void __init at91_map_io(void) if (!at91_soc_is_detected()) panic(pr_fmt("Impossible to detect the SOC type")); - pr_info("Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); + pr_info("Detected soc type: %s\n", soc_name[at91_soc_initdata.type]); if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) pr_info("Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); + soc_subtype_name[at91_soc_initdata.type]); if (!at91_soc_is_enabled()) panic(pr_fmt("Soc not enabled")); @@ -392,10 +346,10 @@ void __init at91_alt_map_io(void) panic("AT91: Impossible to detect the SOC type"); pr_info("AT91: Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); + soc_name[at91_soc_initdata.type]); if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); + soc_subtype_name[at91_soc_initdata.type]); if (!at91_soc_is_enabled()) panic("AT91: Soc not enabled"); @@ -404,17 +358,6 @@ void __init at91_alt_map_io(void) at91_boot_soc.map_io(); } -void __iomem *at91_matrix_base; -EXPORT_SYMBOL_GPL(at91_matrix_base); - -void __init at91_ioremap_matrix(u32 base_addr) -{ - at91_matrix_base = ioremap(base_addr, 512); - if (!at91_matrix_base) - panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); -} - -#if defined(CONFIG_OF) static struct of_device_id ramc_ids[] = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, @@ -456,10 +399,6 @@ void __init at91rm9200_dt_initialize(void) { at91_dt_ramc(); - /* Register the processor-specific clocks */ - if (at91_boot_soc.register_clocks) - at91_boot_soc.register_clocks(); - at91_boot_soc.init(); } @@ -467,33 +406,6 @@ void __init at91_dt_initialize(void) { at91_dt_ramc(); - /* Register the processor-specific clocks */ - if (at91_boot_soc.register_clocks) - at91_boot_soc.register_clocks(); - if (at91_boot_soc.init) at91_boot_soc.init(); } -#endif - -void __init at91_initialize(unsigned long main_clock) -{ - at91_boot_soc.ioremap_registers(); - - /* Register the processor-specific clocks */ - at91_boot_soc.register_clocks(); - - at91_boot_soc.init(); - - pinctrl_provide_dummies(); -} - -void __init at91_register_devices(void) -{ - at91_boot_soc.register_devices(); -} - -void __init at91_init_time(void) -{ - at91_boot_soc.init_time(); -} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 9a8fd97a8bef..ae6c0b2f1146 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -6,14 +6,8 @@ struct at91_init_soc { int builtin; - u32 extern_irq; - unsigned int *default_irq_priority; void (*map_io)(void); - void (*ioremap_registers)(void); - void (*register_clocks)(void); - void (*register_devices)(void); void (*init)(void); - void (*init_time)(void); }; extern struct at91_init_soc at91_boot_soc; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 37b75602adf6..e88e386c9d7b 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -17,7 +17,6 @@ #include #include -#include #include #include diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h index 11d7f4b28dc8..e69de29bb2d1 100644 --- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h +++ b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h @@ -1,17 +0,0 @@ -#ifndef __MACH_ATMEL_MCI_H -#define __MACH_ATMEL_MCI_H - -#include - -/** - * struct mci_dma_data - DMA data for MCI interface - */ -struct mci_dma_data { - struct dw_dma_slave sdata; -}; - -/* accessor macros */ -#define slave_data_ptr(s) (&(s)->sdata) -#define find_slave_dev(s) ((s)->sdata.dma_dev) - -#endif /* __MACH_ATMEL_MCI_H */ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cd4cccbfd2ab..a5af3056e467 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -834,7 +834,7 @@ config PATA_AT32 config PATA_AT91 tristate "PATA support for AT91SAM9260" - depends on ARM && SOC_AT91SAM9 + depends on ARM && SOC_AT91SAM9 && !ARCH_MULTIPLATFORM help This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index d5289098b3df..b5b4d4585c9a 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -262,35 +262,3 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node) } CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit", at91sam926x_pit_dt_init); - -static void __iomem *pit_base_addr; - -void __init at91sam926x_pit_init(int irq) -{ - struct pit_data *data; - - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - panic(pr_fmt("Unable to allocate memory\n")); - - data->base = pit_base_addr; - - data->mck = clk_get(NULL, "mck"); - if (IS_ERR(data->mck)) - panic(pr_fmt("Unable to get mck clk\n")); - - data->irq = irq; - - at91sam926x_pit_common_init(data); -} - -void __init at91sam926x_ioremap_pit(u32 addr) -{ - if (of_have_populated_dt()) - return; - - pit_base_addr = ioremap(addr, 16); - - if (!pit_base_addr) - panic(pr_fmt("Impossible to ioremap PIT\n")); -} diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 77250d4b1979..449554245675 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -34,7 +34,6 @@ #include #include -#include #include #include diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index b0ce7cdee0c2..eea2348b5448 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -277,7 +277,7 @@ config BFIN_CFPCMCIA config AT91_CF tristate "AT91 CompactFlash Controller" - depends on PCMCIA && ARCH_AT91 + depends on PCMCIA && ARCH_AT91 && !ARCH_MULTIPLATFORM help Say Y here to support the CompactFlash controller on AT91 chips. Or choose M to compile the driver as a module named "at91_cf". diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/drivers/pinctrl/at91_pio.h similarity index 100% rename from arch/arm/mach-at91/include/mach/at91_pio.h rename to drivers/pinctrl/at91_pio.h diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 354a81d40925..a193614ce14c 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -25,9 +25,7 @@ /* Since we request GPIOs from ourself */ #include -#include -#include - +#include "at91_pio.h" #include "core.h" #define MAX_GPIO_BANKS 5 diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 596374304532..847f268ffaf7 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -22,9 +22,24 @@ #include #include -#include -#include -#include +#define AT91_SLOW_CLOCK 32768 + +#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ +#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ +#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ +#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ +#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ + +#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ +#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ + +#define AT91_RTT_VR 0x08 /* Real-time Value Register */ +#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ + +#define AT91_RTT_SR 0x0c /* Real-time Status Register */ +#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ +#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ + /* * This driver uses two configurable hardware resources that live in the diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 217365d35a25..36e22816d62e 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -31,7 +31,7 @@ menu "USB Peripheral Controller" config USB_AT91 tristate "Atmel AT91 USB Device Port" - depends on ARCH_AT91 + depends on ARCH_AT91 && !ARCH_MULTIPLATFORM help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index e49eb4f90f5d..6181549883af 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -24,12 +24,8 @@ #include #include -#include #include -#include - - #include "ohci.h" #define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h index 91b77f8d495d..af427a7d3685 100644 --- a/include/linux/atmel-mci.h +++ b/include/linux/atmel-mci.h @@ -1,8 +1,20 @@ #ifndef __LINUX_ATMEL_MCI_H #define __LINUX_ATMEL_MCI_H +#include #include +/** + * struct mci_dma_data - DMA data for MCI interface + */ +struct mci_dma_data { + struct dw_dma_slave sdata; +}; + +/* accessor macros */ +#define slave_data_ptr(s) (&(s)->sdata) +#define find_slave_dev(s) ((s)->sdata.dma_dev) + #define ATMCI_MAX_NR_SLOTS 2 /** diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index b59427d5a697..83975f8d5947 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -34,10 +34,10 @@ #include #include +#ifdef CONFIG_AVR32 #include - -#ifdef CONFIG_ARCH_AT91 -#include +#else +#define cpu_is_at32ap7000() (0) #endif #include "ac97c.h" diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index bb1149126c54..9945ea603279 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -47,7 +47,6 @@ #include #include -#include #include "../codecs/wm8731.h" #include "atmel-pcm.h" -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/