Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751512AbaK1Xr6 (ORCPT ); Fri, 28 Nov 2014 18:47:58 -0500 Received: from mail-gw1-out.broadcom.com ([216.31.210.62]:3029 "EHLO mail-gw1-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751312AbaK1Xr4 (ORCPT ); Fri, 28 Nov 2014 18:47:56 -0500 X-IronPort-AV: E=Sophos;i="5.07,480,1413270000"; d="scan'208";a="52034674" Message-ID: <547909B0.2090408@broadcom.com> Date: Fri, 28 Nov 2014 15:48:00 -0800 From: Arun Ramamurthy User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 MIME-Version: 1.0 To: Tim Kryger , Scott Branden CC: Thierry Reding , Ray Jui , Arun Ramamurthy , , , "Linux Kernel Mailing List" Subject: Re: [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change References: <1416944441-12066-1-git-send-email-sbranden@broadcom.com> <1416944441-12066-3-git-send-email-sbranden@broadcom.com> In-Reply-To: Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 14-11-25 10:22 PM, Tim Kryger wrote: > On Tue, Nov 25, 2014 at 11:40 AM, Scott Branden wrote: >> From: Arun Ramamurthy >> >> The pwm core code requires a separate call for enabling the channel >> and hence the driver does not need to set pwm_trigger after a >> polarity change > > The framework does restrict when polarity changes can occur but it > isn't clear to me that there is any reason to delay applying the > polarity change. I examined several other drivers such as pwm-atmel-tcb.c, pwm-ep93xx.c, pwm-renesas-tpu.c, pwm-samsung.c in the 3.17 kernel tree and none of them enable the channel after changing polarity. We would be the first driver to do so. > Keep in mind that polarity matters even when a PWM > is disabled. While disabled, the output should be equivalent to an > enabled configuration with zero duty. Thus for normal polarity the > output is constant low and for inversed polarity the output is > constant high. The driver does set the duty cycle to zero when disabling the pwm channel.However since the frame work prevents polarity change when the pwm is enabled, I don’t see how one could expect the polarity change to be reflected immediately without a separate call to pwm enable. I believe there is an expectation that the output is > updated to reflect the requested polarity change prior to returning to > the caller. Once again I disagree with this based on other pwm drivers which only change the polarity and do not enable the channel when their set polarity functions are called. > >> >> Signed-off-by: Arun Ramamurthy >> Reviewed-by: Ray Jui >> Signed-off-by: Scott Branden >> --- >> drivers/pwm/pwm-bcm-kona.c | 5 ----- >> 1 file changed, 5 deletions(-) >> >> diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c >> index 29eef9e..fa0b5bf 100644 >> --- a/drivers/pwm/pwm-bcm-kona.c >> +++ b/drivers/pwm/pwm-bcm-kona.c >> @@ -173,11 +173,6 @@ static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, >> >> writel(value, kp->base + PWM_CONTROL_OFFSET); >> >> - kona_pwmc_apply_settings(kp, chan); >> - >> - /* Wait for waveform to settle before gating off the clock */ >> - ndelay(400); >> - >> clk_disable_unprepare(kp->clk); >> >> return 0; >> -- >> 2.1.3 >> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/