Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753984AbaLAPet (ORCPT ); Mon, 1 Dec 2014 10:34:49 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:44130 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753712AbaLAPep (ORCPT ); Mon, 1 Dec 2014 10:34:45 -0500 From: Grygorii Strashko To: Wolfram Sang , Sekhar Nori , =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= CC: , , , Grygorii Strashko , Kevin Hilman , Santosh Shilimkar , Murali Karicheri Subject: [PATCH v3 2/5] i2c: davinci: generate STP always when NACK is received Date: Mon, 1 Dec 2014 17:34:04 +0200 Message-ID: <1417448047-15236-3-git-send-email-grygorii.strashko@ti.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1417448047-15236-1-git-send-email-grygorii.strashko@ti.com> References: <1417448047-15236-1-git-send-email-grygorii.strashko@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a26eb ("i2c: omap: query STP always when NACK is received"). CC: Sekhar Nori CC: Kevin Hilman CC: Santosh Shilimkar CC: Murali Karicheri Reviewed-by: Uwe Kleine-König Reported-by: Hein Tibosch Signed-off-by: Grygorii Strashko --- drivers/i2c/busses/i2c-davinci.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 25e8e25..17e1203 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -411,11 +411,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) if (dev->cmd_err & DAVINCI_I2C_STR_NACK) { if (msg->flags & I2C_M_IGNORE_NAK) return msg->len; - if (stop) { - w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); - w |= DAVINCI_I2C_MDR_STP; - davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); - } + w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); + w |= DAVINCI_I2C_MDR_STP; + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); return -EREMOTEIO; } return -EIO; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/