Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752969AbaLCO3c (ORCPT ); Wed, 3 Dec 2014 09:29:32 -0500 Received: from a.ns.miles-group.at ([95.130.255.143]:65275 "EHLO radon.swed.at" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752633AbaLCO3b (ORCPT ); Wed, 3 Dec 2014 09:29:31 -0500 Message-ID: <547F1E46.9050607@nod.at> Date: Wed, 03 Dec 2014 15:29:26 +0100 From: Richard Weinberger User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.1.0 MIME-Version: 1.0 To: Harald Geyer CC: jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, sanjeev_sharma@mentor.com, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: iio: dht11 Updates References: <1417563176-31972-1-git-send-email-richard@nod.at> <547F0CFE.4010107@nod.at> In-Reply-To: Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Am 03.12.2014 um 15:08 schrieb Harald Geyer: > Richard Weinberger writes: >> Harald, >> >> Am 03.12.2014 um 13:18 schrieb Harald Geyer: >>> Hi Richard, >>> >>> thanks for all the work you put into this! >>> >>> Richard Weinberger writes: >>>> I have also a question on your driver. Why you increment >>>> DHT11_DATA_BIT_LOW/timeres by one in the ambiguity check? >>>> >>>> threshold = DHT11_DATA_BIT_HIGH / timeres; >>>> if (DHT11_DATA_BIT_LOW/timeres + 1 >= threshold) >>>> pr_err("dht11: WARNING: decoding ambiguous\n"); >>> >>> This is to take ambiguity of when the bit started relativ to the >>> clock ticks into account. For example with common 32kHz clocks: >>> DHT11_DATA_BIT_LOW / timeres = 0 >>> DHT11_DATA_BIT_HIGH / timeres = 2 >>> but since the bit might not start at a clock tick the actual t of >>> a low bit can be either 0 or 1 while the actual t of a high bit >>> can be either 2 or 3. >>> >>> This case is fine. >>> >>> But if we had a 38kHz clock: >>> DHT11_DATA_BIT_LOW / timeres = 1 t can be 1 or 2 >>> DHT11_DATA_BIT_HIGH / timeres = 2 t can be 2 or 3 >>> so we have an ambiguity. The ambiguity could be removed by a smarter >>> decoder, that looks at the t of other bits, but I'm not going to do >>> that unless somebody is promising to test it on affected hardware. >>> >>> Feel free to add some comment about this to the code. >> >> Will do, thanks a lot for the explanation. >> >> I was asking because I see the "dht11: WARNING: decoding ambiguous" >> very often. (with and without my patches) > > Yes, your patches shouldn't have any effect on this. > "very often" in the sense of "not always"? This would be very surprising, > because this would involve variable length clock ticks, i think. It happens around 33% of all reads. BTW: I'm using the DHT22's on my Beaglebone Black. So the board should be "sane". But I'll test them on another board too, just to be sure... > I guess we should include timeres into the warning message. I'll add some diagnose printk()s to find out. Thanks, //richard -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/