Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933294AbaLDVmf (ORCPT ); Thu, 4 Dec 2014 16:42:35 -0500 Received: from mail-gw2-out.broadcom.com ([216.31.210.63]:19761 "EHLO mail-gw2-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933104AbaLDVlm (ORCPT ); Thu, 4 Dec 2014 16:41:42 -0500 X-IronPort-AV: E=Sophos;i="5.07,518,1413270000"; d="scan'208";a="52313838" From: Ray Jui To: Mike Turquette , Matt Porter , Alex Elder , Tim Kryger , "Rob Herring" , Pawel Moll , Mark Rutland , Ian Campbell , Russell King CC: , , Scott Branden , , , Ray Jui Subject: [PATCH 1/4] clk: iproc: define Broadcom iProc clock binding Date: Thu, 4 Dec 2014 13:43:25 -0800 Message-ID: <1417729408-30357-2-git-send-email-rjui@broadcom.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1417729408-30357-1-git-send-email-rjui@broadcom.com> References: <1417729408-30357-1-git-send-email-rjui@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Document the device tree binding for Broadcom iProc architecture based clock controller Signed-off-by: Ray Jui Reviewed-by: Scott Branden --- brcm,iproc-clocks.txt | 178 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 178 insertions(+) create mode 100644 brcm,iproc-clocks.txt diff --git a/brcm,iproc-clocks.txt b/brcm,iproc-clocks.txt new file mode 100644 index 0000000..cc64fd2 --- /dev/null +++ b/brcm,iproc-clocks.txt @@ -0,0 +1,178 @@ +Broadcom iProc Family Clocks + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The iProc clock controller manages clocks that are common to the iProc family. +An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, +LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL +comprises of several leaf clocks + +Required properties for PLLs: +- compatible: + Should have a value of the form "brcm,-". For example, GENPLL on +Cygnus has a compatible string of "brcm,cygnus-genpll" + +- #clock-cells: + Must be <0> + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for the PLL + +- clocks: + The input parent clock phandle for the PLL. For all iProc PLLs, this is an +onboard crystal with a fixed rate + +Optional Properties for PLLs: +- clock-frequency: + PLL frequency in Hz. If specified, PLL will be configured to run at + instead of the default frequency after chip reset, provided +that and its parameters are defined in the SoC specific +frequency parameter table + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll: genpll { + #clock-cells = <0>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, + <0x0301c020 0x4>; + clocks = <&osc>; + }; + +Required properties for leaf clocks of a PLL: + +- compatible: + Should have a value of the form "brcm,--clk". For example, leaf +clocks derived from the GENPLL on Cygnus SoC have a compatible string of +"brcm,cygnus-genpll-clk" + +- #clock-cells: + Have a value of <1> since there are more than 1 leaf clock of a +given PLL + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for the PLL leaf clocks + +- clocks: + The input parent PLL phandle for the leaf clock + +- clock-output-names: + An ordered list of strings defining the names of the leaf clocks + +Example: + + genpll: genpll { + #clock-cells = <0>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, + <0x0301c020 0x4>; + clocks = <&osc>; + }; + + genpll_clks: genpll_clks { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll-clk"; + reg = <0x0301d000 0x2c>; + clocks = <&genpll>; + clock-output-names = "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + +Required properties for ASIU clocks: + +ASIU clocks are a special case. These clocks are derived directly from the +reference clock of the onboard crystal + +- compatible: + Should have a value of the form "brcm,-asiu-clk". For example, ASIU +clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" + +- #clock-cells: + Have a value of <1> since there are more than 1 ASIU clocks + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for ASIU clocks + +- clocks: + The input parent clock phandle for the ASIU clock, i.e., the onboard +crystal + +- clock-output-names: + An ordered list of strings defining the names of the ASIU clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks: asiu_clks { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x0301d048 0xc>, + <0x180aa024 0x4>; + clocks = <&osc>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; + +Cygnus +------ +PLL and leaf clock compatible strings for Cygnus are: + "brcm,cygnus-armpll" + "brcm,cygnus-genpll" + "brcm,cygnus-lcpll0" + "brcm,cygnus-mipipll" + "brcm,cygnus-genpll-clk" + "brcm,cygnus-lcpll0-clk" + "brcm,cygnus-mipipll-clk" + "brcm,cygnus-asiu-clk" + +The following table defines the set of PLL/clock index and ID for Cygnus. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + genpll crystal N/A N/A + lcpll0 crystal N/A N/A + mipipll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + axi21 genpll 0 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 1 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 2 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 3 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 4 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 5 BCM_CYGNUS_GENPLL_CAN_CLK + + pcie_phy lcpll0 0 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 1 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 2 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 3 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 4 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5 lcpll0 5 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + ch0_unused mipipll 0 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 1 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_unused mipipll 2 BCM_CYGNUS_MIPIPLL_CH2_UNUSED + ch3_unused mipipll 3 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH5_UNUSED -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/