Return-Path: <linux-kernel-owner+willy=40w.ods.org@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id <S261292AbSL2SZz>; Sun, 29 Dec 2002 13:25:55 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org
	id <S261305AbSL2SZz>; Sun, 29 Dec 2002 13:25:55 -0500
Received: from ylug.mozilla.gr.jp ([203.141.142.92]:17 "HELO maison.kyo-ko.org")
	by vger.kernel.org with SMTP id <S261292AbSL2SZs>;
	Sun, 29 Dec 2002 13:25:48 -0500
X-Mailer: cmail 2.61.1+20011011 on GNU Emacs 20.7.2 / Mule 4.1
 =?ISO-2022-JP?B?KBskQjAqGyhCKQ==?=
From: Hiroshi Miura <miura@da-cha.org>
To: cpufreq@www.linux.org.uk, linux@brodo.de
Cc: miura@da-cha.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2.5.53] new cpufreq driver for NatSemi Geode
X-Face: "7/]{D;9O-#dR'kB\tvpz_:#o|*UdC.KK/_"IN*i5VTU&EBhS6w68xQDPh]i4N%1byZ~v~X
 k$vdp(%V@gY!_|7x7Ht)^ih5\%\l'hcl$`sqp;%`boxPHDJB<~Sr8(e:zPKmeZ)ZPml[0v\|[V00Jm
 G,%5V5X9Mw7j}(8+!o>&&wmQ]Xh=j
User-Agent: SEMI/1.14.4 (=?ISO-2022-JP?B?GyRCOllPJExaGyhC?=) FLIM/1.14.4
 (=?ISO-2022-JP?B?GyRCM2A4Nj9ANVxBMBsoQg==?=) APEL/10.4 Emacs/20.7
 (i386-debian-linux-gnu) MULE/4.1 (=?ISO-2022-JP?B?GyRCMCobKEI=?=)
MIME-Version: 1.0 (generated by SEMI 1.14.4 - =?ISO-2022-JP?B?IhskQjpZGyhC?=
 =?ISO-2022-JP?B?GyRCTyRMWhsoQiI=?=)
Content-Type: text/plain; charset=US-ASCII
Message-Id: <20021229183400.03296118472@triton2>
Date: Mon, 30 Dec 2002 03:34:00 +0900 (JST)
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 17873
Lines: 532


I write a new cpufreq driver for NatSemi Geode.
This driver supports old Cyrix MediaGXm or NatSemi Geode GX series 
with CS5530,CS5530A, CS5520 and CS5510.

This driver detects a chipset and does thing that suitable for chip.
I test it on MediaGXm 200MHz with CS5520 and Geode GX1 with CS5520.

My code based on Zwane Mwaikambo's patch. I re-write almost.

Please merge this driver into cpufreq project patchset.

A patch for 2.5.53 is attatched and you can download driver file only from
http://www.da-cha.org/geode/gx-suspmod.c

diff -uNr -X kernel-patches/dontdiff linux-2.5.53/arch/i386/Kconfig edited/linux-2.5.53/arch/i386/Kconfig
--- linux-2.5.53/arch/i386/Kconfig	2002-12-26 02:33:08.000000000 +0900
+++ edited/linux-2.5.53/arch/i386/Kconfig	2002-12-25 16:37:01.000000000 +0900
@@ -985,6 +1003,17 @@
 
 	  If in doubt, say N.
 
+config X86_GX_SUSPMOD
+	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+	depends on CPU_FREQ
+	help
+	 This add the CPUFreq driver for NatSemi Geode processors which
+	 support suspend modulation.
+
+	 For details, take a look at linux/Documentation/cpufreq.
+
+	 If in doubt, say N.
+
 endmenu
 
 
diff -uNr -X kernel-patches/dontdiff linux-2.5.53/arch/i386/defconfig edited/linux-2.5.53/arch/i386/defconfig
--- linux-2.5.53/arch/i386/defconfig	2002-12-03 07:55:46.000000000 +0900
+++ edited/linux-2.5.53/arch/i386/defconfig	2002-12-25 16:37:01.000000000 +0900
@@ -65,6 +65,7 @@
 CONFIG_X86_MCE=y
 # CONFIG_X86_MCE_NONFATAL is not set
 CONFIG_X86_MCE_P4THERMAL=y
+# CONFIG_X86_GX_SUSPMOD is not set
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
 # CONFIG_MICROCODE is not set
diff -uNr -X kernel-patches/dontdiff linux-2.5.53/arch/i386/kernel/cpu/cpufreq/Makefile edited/linux-2.5.53/arch/i386/kernel/cpu/cpufreq/Makefile
--- linux-2.5.53/arch/i386/kernel/cpu/cpufreq/Makefile	2002-12-17 23:28:28.000000000 +0900
+++ edited/linux-2.5.53/arch/i386/kernel/cpu/cpufreq/Makefile	2002-12-25 16:37:01.000000000 +0900
@@ -4,3 +4,5 @@
 obj-$(CONFIG_X86_P4_CLOCKMOD)	+= p4-clockmod.o
 obj-$(CONFIG_ELAN_CPUFREQ)	+= elanfreq.o
 obj-$(CONFIG_X86_LONGRUN)	+= longrun.o  
+obj-$(CONFIG_X86_GX_SUSPMOD)    += gx-suspmod.o
+
diff -uNr -X kernel-patches/dontdiff linux-2.5.53/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c edited/linux-2.5.53/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
--- linux-2.5.53/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c	1970-01-01 09:00:00.000000000 +0900
+++ edited/linux-2.5.53/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c	2002-12-25 16:37:01.000000000 +0900
@@ -0,0 +1,467 @@
+/*
+ *	Cyrix MediaGX and NatSemi Geode Suspend Modulation
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Hiroshi Miura   <miura@da-cha.org>
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      version 2 as published by the Free Software Foundation 
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *	
+ * Theoritical note:
+ *
+ *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
+ *
+ *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
+ *	are based on Suspend Moduration.
+ *
+ *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
+ *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
+ *	the CPU enters an idle state. GX1 stops its core clock when SUSP# is 
+ *	asserted then power consumption is reduced.
+ *
+ *	Suspend Modulation's OFF/ON duration are configurable 
+ *	with 'Suspend Modulation OFF Count Register'
+ *	and 'Suspend Modulation ON Count Register'.
+ *	These registers are 8bit counters that represent the number of 
+ *	32us intervals which the SUSP# pin is asserted/de-asserted to the 
+ *	processor.
+ *
+ *	These counters define a ratio which is the effective frequency 
+ * 	of operation of the system.
+ *
+ *			       On Count
+ *	F_eff = Fgx * ----------------------
+ *	                On Count + Off Count
+ *
+ *	0 <= On Count, Off Count <= 255
+ *
+ *	From these limits, we can get register values 
+ *
+ *	on_duration + off_duration <= MAX_DURATION
+ *	off_duration = on_duration * (stock_freq - freq) / freq
+ *
+ *      on_duration  =  (freq * MAX_DURAION) / stock_freq 
+ *      off_duration = MAX_DURAION - on_duration 
+ *
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ *	Dec. 11, 2002 	Hiroshi Miura <miura@da-cha.org>
+ *		- rewrite for Cyrix MediaGX Cx5510/5520 and 
+ *		  NatSemi Geode Cs5530(A).
+ *
+ *	Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
+ *		- cs5530_mod patch for 2.4.19-rc1.
+ *
+ *---------------------------------------------------------------------------
+ *
+ * Todo
+ *	Test on machines with 5510, 5530, 5530A
+ */
+
+/************************************************************************
+ *			Suspend Modulation - Definitions		*
+ ************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <asm/processor.h> 
+#include <asm/errno.h>
+
+/* PCI config registers, all at F0 */
+#define PCI_PMER1              0x80    /* power management enable register 1 */
+#define PCI_PMER2              0x81    /* power management enable register 2 */
+#define PCI_PMER3              0x82    /* power management enable register 3 */
+#define PCI_IRQTC              0x8c    /* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC              0x8d    /* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF             0x94    /* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON              0x95    /* suspend modulation ON counter register */
+#define PCI_SUSCFG             0x96    /* suspend configuration register */
+
+/* PMER1 bits */
+#define GPM                    (1<<0)  /* global power management */
+#define GIT                    (1<<1)  /* globally enable PM device idle timers */
+#define GTR                    (1<<2)  /* globally enable IO traps */
+#define IRQ_SPDUP              (1<<3)  /* disable clock throttle during interrupt handling */
+#define VID_SPDUP              (1<<4)  /* disable clock throttle during vga video handling */
+
+/* SUSCFG bits */
+#define SUSMOD                 (1<<0)  /* enable/disable suspend modulation */
+/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ 
+#define SMISPDUP               (1<<1)  /* select how SMI re-enable suspend modulation: */
+                                       /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG                 (1<<2)  /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the belows support only with cs5530A */ 
+#define PWRSVE_ISA             (1<<3)  /* stop ISA clock  */
+#define PWRSVE                 (1<<4)  /* active idle */
+
+struct gxfreq_params {
+	u8 on_duration;
+	u8 off_duration;
+	u8 pci_suscfg;
+	u8 pci_pmer1;
+	u8 pci_pmer2;
+	u8 pci_rev;
+	struct pci_dev *cs55x0;
+};
+
+static struct cpufreq_driver *gx_driver;
+static struct gxfreq_params *gx_params;
+static int stock_freq;
+MODULE_PARM(stock_freq, "i");
+
+/* DEBUG
+ *   Define it if you want verbose debug output
+ */
+
+#define SUSPMOD_DEBUG 1
+
+#ifdef SUSPMOD_DEBUG
+#define dprintk(msg...) printk(KERN_DEBUG "cpufreq:" msg)
+#else
+#define dprintk(msg...) do { } while(0);
+#endif
+
+/**
+ *      we can detect a core multipiler from dir0_lsb 
+ *      from GX1 datasheet p.56, 
+ *	   MULT[3:0]:
+ *	   0000 = SYSCLK multiplied by 4 (test only)
+ *	   0001 = SYSCLK multiplied by 10
+ *	   0010 = SYSCLK multiplied by 4
+ *	   0011 = SYSCLK multiplied by 6
+ *	   0100 = SYSCLK multiplied by 9
+ *	   0101 = SYSCLK multiplied by 5
+ *	   0110 = SYSCLK multiplied by 7
+ *	   0111 = SYSCLK multiplied by 8
+ *              of 33.3MHz
+ **/
+static int gx_freq_mult[16] = {
+		4, 10, 4, 6, 9, 5, 7, 8,
+		0, 0, 0, 0, 0, 0, 0, 0
+};
+
+#define PCI_BUSCLK		(30000)
+#define	MIN_CPUFREQ_DIV		(10)
+
+/****************************************************************
+ * 	Low Level chipset interface				*
+ ****************************************************************/
+static struct pci_device_id gx_chipset_tbl[] __initdata = {
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+        { 0, },
+};
+
+/**
+ *     gx_detect_chipset:
+ *
+ **/
+static struct pci_dev *gx_detect_chipset(void)
+{
+	struct pci_dev *gx_pci;
+
+	/* check if CPU is a MediaGX or a Geode. */
+        if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && 
+	    (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
+		printk(KERN_INFO "gx-suspmod: error: no MediaGX/Geode processor found!\n");
+		return NULL;		
+	}
+
+	/* detect which companion chip is used */
+#if 1
+	pci_for_each_dev(gx_pci) {
+		if ((pci_match_device (gx_chipset_tbl, gx_pci)) != NULL) {
+			return gx_pci;
+		}
+	}
+#else
+	gx_pci = pci_find_subsys(PCI_VENDOR_ID_CYRIX,
+			PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+			PCI_ANY_ID,
+			PCI_ANY_ID,
+			NULL);
+	if (gx_pci) return gx_pci;
+	gx_pci = pci_find_subsys(PCI_VENDOR_ID_CYRIX,
+			PCI_DEVICE_ID_CYRIX_5520,
+			PCI_ANY_ID,
+			PCI_ANY_ID,
+			NULL);
+	if (gx_pci) return gx_pci;
+	gx_pci = pci_find_subsys(PCI_VENDOR_ID_CYRIX,
+			PCI_DEVICE_ID_CYRIX_5510,
+			PCI_ANY_ID,
+			PCI_ANY_ID,
+			NULL);
+	if (gx_pci) return gx_pci;
+#endif
+
+	printk(KERN_INFO "gx-suspmod: error: no supported chipset found!\n");
+	return NULL;
+}
+
+/**
+ *      gx_get_cpuspeed:
+ *
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ */
+static int gx_get_cpuspeed(void)
+{
+	if ((gx_params->pci_suscfg & SUSMOD) == 0) 
+		return stock_freq;
+
+	return (stock_freq * gx_params->on_duration) 
+		/ (gx_params->on_duration + gx_params->off_duration);
+}
+
+/**
+ *      gx_validate_speed:
+ *      determine current cpu speed
+ *       
+**/
+
+#define MAX_DURATION 20
+
+static unsigned int gx_validate_speed(unsigned int khz)
+{
+
+	gx_params->on_duration = ((khz*MAX_DURATION) / stock_freq) & 0xff; 
+	gx_params->off_duration = MAX_DURATION - gx_params->on_duration;
+
+	while ((gx_params->on_duration & 1)&&(gx_params->off_duration & 1)) {
+		gx_params->on_duration = (gx_params->on_duration >> 1) & 0xff;
+		gx_params->off_duration = (gx_params->off_duration >> 1) & 0xff;
+	}
+
+        /* off_duration = (gx_params->on_duration * (stock_freq - khz))/khz; */
+
+	return (stock_freq * gx_params->on_duration) / (gx_params->on_duration + gx_params->off_duration);
+}
+
+
+/**
+ * 	gx_set_cpuspeed:
+ *		set cpu speed in khz.
+ **/
+
+static void gx_set_cpuspeed(unsigned int khz)
+{
+        u8 suscfg, pmer1;
+	unsigned int new_khz;
+	unsigned long flags;
+	struct cpufreq_freqs freqs;
+
+
+	freqs.cpu = 0;
+	freqs.old = gx_get_cpuspeed();
+
+	new_khz = gx_validate_speed(khz);
+
+#ifdef CONFIG_CPU_FREQ_24_API       
+	gx_driver->cpu_cur_freq[0] = new_khz;
+#endif
+	freqs.new = new_khz;
+
+	if (new_khz == stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
+		local_irq_save(flags);
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, (gx_params->pci_suscfg & ~(SUSMOD)));
+		pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &(gx_params->pci_suscfg));
+		local_irq_restore(flags);
+		dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		return;
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	local_irq_save(flags);
+	switch (gx_params->cs55x0->device) {
+	case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+		pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
+		/* FIXME: need to test other values -- Zwane,Miura */
+		pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
+		pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
+		pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
+
+		if (gx_params->pci_rev < 0x10) {   /* CS5530(rev 1.2, 1.3) */
+			suscfg = gx_params->pci_suscfg | SUSMOD;
+		} else {                           /* CS5530A,B.. */
+			suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+		}
+		break;
+	case PCI_DEVICE_ID_CYRIX_5520:
+	case PCI_DEVICE_ID_CYRIX_5510:
+		suscfg = gx_params->pci_suscfg | SUSMOD;
+		break;
+	default:
+		local_irq_restore(flags);
+		dprintk("fatal: try to set unknown chipset.\n");
+		return;
+	}
+
+	pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
+	pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+
+        pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+        pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+
+        local_irq_restore(flags);
+
+	gx_params->pci_suscfg = suscfg;
+	freqs.new= gx_get_cpuspeed();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+                gx_params->on_duration * 32, gx_params->off_duration * 32);
+	dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); 
+}
+
+/****************************************************************
+ *             High level functions                             *
+ ****************************************************************/
+
+/*
+ *	cpufreq_gx_verify: test if frequency range is valid 
+ *
+ *	This function checks if a given frequency range in kHz is valid 
+ *      for the hardware supported by the driver. 
+ */
+
+int cpufreq_gx_verify(struct cpufreq_policy *policy)
+{
+
+        if (!gx_driver || !stock_freq || !policy)
+                return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_limits(policy, (stock_freq / MIN_CPUFREQ_DIV), stock_freq);
+	
+	return 0;
+}
+
+/*
+ *      cpufreq_gx_setpolicy:  
+ *
+ */
+int cpufreq_gx_setpolicy(struct cpufreq_policy *policy)
+{
+
+        if (!gx_driver || !stock_freq || !policy)
+                return -EINVAL;
+
+	policy->cpu = 0;
+
+	if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+		gx_set_cpuspeed(policy->min);	
+	} else {
+		gx_set_cpuspeed(policy->max);
+	}
+	return 0;
+}
+
+/* 
+ * cpufreq_gx_init:
+ *   MediaGX/Geode GX initilize cpufreq driver
+ */
+
+int __init cpufreq_gx_init(void)
+{
+	int maxfreq,ret,curfreq;
+ 	struct cpufreq_driver *driver;
+	struct gxfreq_params *params;
+	struct pci_dev *gx_pci;
+	u32 class_rev;
+
+	/* Test if we have the right hardware */
+	if ((gx_pci = gx_detect_chipset()) == NULL) 
+		return -ENODEV;
+
+	dprintk("geode suspend modulation available.\n");
+
+	driver = kmalloc(sizeof(struct cpufreq_driver) + NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
+	if (driver == NULL) 
+		return -ENOMEM;
+	params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
+	if (params == NULL) {
+		kfree(driver);
+		return -ENOMEM;
+	}
+
+	driver->policy = (struct cpufreq_policy *)(driver + 1);
+	params->cs55x0 = gx_pci;
+
+	/* keep cs55x0 configurations */
+	pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
+	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
+	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
+	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
+	pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+        pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
+	params->pci_rev = class_rev && 0xff;
+
+	gx_params = params;
+
+	maxfreq = stock_freq?stock_freq
+		            :(stock_freq = PCI_BUSCLK * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]); 
+	curfreq = gx_get_cpuspeed();
+	dprintk("cpu max frequency is %d.\n", maxfreq);
+	dprintk("cpu current frequency is %dkHz.\n",curfreq);
+
+	/* setup basic struct for cpufreq API */
+#ifdef CONFIG_CPU_FREQ_24_API
+	driver->cpu_cur_freq[0] = curfreq;
+#endif
+	driver->policy[0].cpu = 0;
+	driver->policy[0].min = maxfreq/MIN_CPUFREQ_DIV;
+	driver->policy[0].max = maxfreq;
+	driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
+	driver->policy[0].cpuinfo.min_freq = maxfreq/MIN_CPUFREQ_DIV;
+	driver->policy[0].cpuinfo.max_freq = maxfreq;
+	driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	driver->verify = &cpufreq_gx_verify;
+	driver->setpolicy = &cpufreq_gx_setpolicy;
+
+	gx_driver = driver;
+
+	if ((ret = cpufreq_register(driver))) { 
+		kfree(driver);
+		kfree(params);
+		return ret;                   /* register error! */
+	}
+
+	return 0;
+}
+
+void __exit cpufreq_gx_exit(void)
+{
+	if (gx_driver) {
+//		pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, gx_params->pci_suscfg);
+//		pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, gx_params->pci_pmer1);
+//		pci_write_config_byte(gx_params->cs55x0, PCI_PMER2, gx_params->pci_pmer2);
+		cpufreq_unregister();
+		kfree(gx_driver);
+		kfree(gx_params);
+	}
+}
+
+MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_gx_init);
+module_exit(cpufreq_gx_exit);
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/