Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751909AbaLFRVa (ORCPT ); Sat, 6 Dec 2014 12:21:30 -0500 Received: from h1.radempa.de ([176.9.142.194]:46728 "EHLO mail.cosmopool.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751124AbaLFRV2 (ORCPT ); Sat, 6 Dec 2014 12:21:28 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Date: Sat, 06 Dec 2014 18:21:18 +0100 From: To: Richard Weinberger Cc: , , , , , , Subject: Re: [PATCH 2/4] iio: dht11: IRQ fixes In-Reply-To: <1417563176-31972-3-git-send-email-richard@nod.at> References: <1417563176-31972-1-git-send-email-richard@nod.at> <1417563176-31972-3-git-send-email-richard@nod.at> Message-ID: User-Agent: RoundCube Webmail/0.3.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Richard, finally got around to test this patch on all HW I have. As expected the preamble needs to be shortend by two edges: With your patch in its current form, the driver stops to work reliably with DHT11. Also with DHT22 you get some delay when reading the data, because you always wait for the timeout to happen, before trying to decode the data. Since your patch title includes "fix", the commit message probably should mention that the patch as a side effect changes behaviour - even if it's just diagnostic messages. Thanks, Harald On Wed, 3 Dec 2014 00:32:54 +0100, Richard Weinberger wrote: > Signed-off-by: Richard Weinberger > --- > drivers/iio/humidity/dht11.c | 56 > ++++++++++++++++++++++++-------------------- > 1 file changed, 30 insertions(+), 26 deletions(-) > > diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c > index 168ebc4..0023699 100644 > --- a/drivers/iio/humidity/dht11.c > +++ b/drivers/iio/humidity/dht11.c > @@ -140,6 +140,27 @@ static int dht11_decode(struct dht11 *dht11, int > offset) > return 0; > } > > +/* > + * IRQ handler called on GPIO edges > + */ > +static irqreturn_t dht11_handle_irq(int irq, void *data) > +{ > + struct iio_dev *iio = data; > + struct dht11 *dht11 = iio_priv(iio); > + > + /* TODO: Consider making the handler safe for IRQ sharing */ > + if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) { > + dht11->edges[dht11->num_edges].ts = iio_get_time_ns(); > + dht11->edges[dht11->num_edges++].value = > + gpio_get_value(dht11->gpio); > + > + if (dht11->num_edges >= DHT11_EDGES_PER_READ) > + complete(&dht11->completion); > + } > + > + return IRQ_HANDLED; > +} > + > static int dht11_read_raw(struct iio_dev *iio_dev, > const struct iio_chan_spec *chan, > int *val, int *val2, long m) > @@ -160,8 +181,17 @@ static int dht11_read_raw(struct iio_dev *iio_dev, > if (ret) > goto err; > > + ret = request_irq(dht11->irq, dht11_handle_irq, > + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > + iio_dev->name, iio_dev); > + if (ret) > + goto err; > + > ret = wait_for_completion_killable_timeout(&dht11->completion, > HZ); > + > + free_irq(dht11->irq, iio_dev); > + > if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) { > dev_err(&iio_dev->dev, > "Only %d signal edges detected\n", > @@ -197,27 +227,6 @@ static const struct iio_info dht11_iio_info = { > .read_raw = dht11_read_raw, > }; > > -/* > - * IRQ handler called on GPIO edges > -*/ > -static irqreturn_t dht11_handle_irq(int irq, void *data) > -{ > - struct iio_dev *iio = data; > - struct dht11 *dht11 = iio_priv(iio); > - > - /* TODO: Consider making the handler safe for IRQ sharing */ > - if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) { > - dht11->edges[dht11->num_edges].ts = iio_get_time_ns(); > - dht11->edges[dht11->num_edges++].value = > - gpio_get_value(dht11->gpio); > - > - if (dht11->num_edges >= DHT11_EDGES_PER_READ) > - complete(&dht11->completion); > - } > - > - return IRQ_HANDLED; > -} > - > static const struct iio_chan_spec dht11_chan_spec[] = { > { .type = IIO_TEMP, > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), }, > @@ -260,11 +269,6 @@ static int dht11_probe(struct platform_device *pdev) > dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio); > return -EINVAL; > } > - ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq, > - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > - pdev->name, iio); > - if (ret) > - return ret; > > dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1; > dht11->num_edges = -1; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/