Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 30 Dec 2002 02:59:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 30 Dec 2002 02:59:47 -0500 Received: from landfill.ihatent.com ([217.13.24.22]:60133 "EHLO mail.ihatent.com") by vger.kernel.org with ESMTP id ; Mon, 30 Dec 2002 02:59:46 -0500 To: Joshua Kwan Cc: linux-kernel@vger.kernel.org Subject: Re: PCMCIA and hermer/orinoco_cs drivers b0rken? References: <87u1h3fim2.fsf@lapper.ihatent.com> <20021226003405.014f0638.joshk@mspencer.net> From: Alexander Hoogerhuis Date: 30 Dec 2002 05:17:26 +0100 In-Reply-To: <20021226003405.014f0638.joshk@mspencer.net> Message-ID: <87u1gwuomh.fsf@lapper.ihatent.com> User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.2 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3804 Lines: 93 Joshua Kwan writes: > Hi, > > Are you using the modules from the kernel source or from pcmcia-cs? Are > you using yenta_socket or pcmcia-cs? pcmcia-cs has given me a lot more > positive results than trying to use yenta_socket and the built in kernel > modules. Also, try binding your card IDs to use wavelan_cs instead and > see if it works (maybe those cards are a bit older and as such need > older drivers.) > Avoiding the kernel-side PCMCIA-stuff and using the standalone package got me a lot further. After a few tweaks int he config files I get the interface up and things startes to happen: lapper root # ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:09:5B:27:DC:F9 inet addr:172.31.255.242 Bcast:172.31.255.247 Mask:255.255.255.248 inet6 addr: fe80::209:5bff:fe27:dcf9/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:8 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:516 (516.0 b) Interrupt:11 Base address:0x100 lapper root # iwconfig eth1 Warning: Driver for device eth1 has been compiled with version 14 of Wireless Extension, while this program is using version 13. Some things may be broken... eth1 IEEE 802.11-DS ESSID:"humbug" Nickname:"lapper.ihatent.com" Mode:Ad-Hoc Frequency:2.417GHz Cell: 02:09:A7:FB:DC:F9 Bit Rate:11Mb/s Tx-Power=15 dBm Sensitivity:1/3 Retry min limit:8 RTS thr:off Fragment thr:off Encryption key:6875-6262-61 Encryption mode:open Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Seems I need to get the wireless tools rebuilt and I'll be in touch with a WLAN in a few hours, but this all seems swell now. After inserting the card (NetGear MA401) I get this in my log tho: eth1: Station identity 001f:0006:0001:0003 eth1: Looks like an Intersil firmware version 1.03 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:09:5B:27:DC:F9 eth1: Station name "Prism I" eth1: ready eth1: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x013f eth1: Error -110 setting multicast list. eth1: Error -110 setting multicast list. eth1: Error -110 setting multicast list. eth1: Error -110 setting multicast list. eth1: Error -110 setting multicast list. eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode. eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode. eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode. eth1: Error -110 writing packet to BAP eth1: Error -110 writing Tx descriptor to BAP eth1: Error -110 writing Tx descriptor to BAP eth1: Error -110 writing Tx descriptor to BAP eth1: Error -110 writing Tx descriptor to BAP eth1: Error -110 writing Tx descriptor to BAP eth1: Error -110 writing Tx descriptor to BAP eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode. If you have an idea about the errors, drop me a line, and if not I'll dig into it :) mvh, A > Hope this helps you. > Regards > > -Josh > Sure did :) -A -- Alexander Hoogerhuis | alexh@ihatent.com CCNP - CCDP - MCNE - CCSE | +47 908 21 485 "You have zero privacy anyway. Get over it." --Scott McNealy - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/