Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756127AbaLIAWj (ORCPT ); Mon, 8 Dec 2014 19:22:39 -0500 Received: from seldrel01.sonyericsson.com ([212.209.106.2]:2532 "EHLO seldrel01.sonyericsson.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755493AbaLIAWi (ORCPT ); Mon, 8 Dec 2014 19:22:38 -0500 From: Bjorn Andersson To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Bryan Wu , Richard Purdie , Grant Likely CC: Courtney Cavin , , , , Subject: [PATCH 1/2] leds: add DT binding for Qualcomm PM8941 WLED block Date: Mon, 8 Dec 2014 16:22:30 -0800 Message-ID: <1418084551-28946-1-git-send-email-bjorn.andersson@sonymobile.com> X-Mailer: git-send-email 1.8.2.2 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Courtney Cavin This adds device tree binding documentation for the WLED ('White' LED) block on Qualcomm's PM8941 PMICs. Signed-off-by: Courtney Cavin Signed-off-by: Bjorn Andersson --- .../devicetree/bindings/leds/leds-pm8941-wled.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt new file mode 100644 index 0000000..a85a964 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt @@ -0,0 +1,43 @@ +Binding for Qualcomm PM8941 WLED driver + +Required properties: +- compatible: should be "qcom,pm8941-wled" +- reg: slave address + +Optional properties: +- label: The label for this led + See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: Default trigger assigned to the LED + See Documentation/devicetree/bindings/leds/common.txt +- qcom,cs-out: bool; enable current sink output +- qcom,cabc: bool; enable content adaptive backlight control +- qcom,ext-gen: bool; use externally generated modulator signal to dim +- qcom,current-limit: mA; per-string current limit; value from 0 to 25 + default: 20mA +- qcom,current-boost-limit: mA; boost current limit; one of: + 105, 385, 525, 805, 980, 1260, 1400, 1680 + default: 805mA +- qcom,switching-freq: kHz; switching frequency; one of: + 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, + 1600, 1920, 2400, 3200, 4800, 9600, + default: 1600kHz +- qcom,ovp: V; Over-voltage protection limit; one of: + 27, 29, 32, 35 + default: 29V +- qcom,num-strings: #; number of led strings attached; value from 1 to 3 + default: 2 + +Example: + +pm8941-wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/