Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934304AbaLKJYW (ORCPT ); Thu, 11 Dec 2014 04:24:22 -0500 Received: from dub004-omc1s6.hotmail.com ([157.55.0.205]:57757 "EHLO DUB004-OMC1S6.hotmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932997AbaLKJYN convert rfc822-to-8bit (ORCPT ); Thu, 11 Dec 2014 04:24:13 -0500 X-Greylist: delayed 303 seconds by postgrey-1.27 at vger.kernel.org; Thu, 11 Dec 2014 04:24:13 EST X-TMN: [BLZcKdld1M6Trp0s6aSX7WRQF0zCD+a4] X-Originating-Email: [pupilla@hotmail.com] Message-ID: From: Marco Berizzi To: "linux-kernel@vger.kernel.org" Subject: NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out Date: Thu, 11 Dec 2014 10:19:09 +0100 Importance: Normal Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-OriginalArrivalTime: 11 Dec 2014 09:19:10.0019 (UTC) FILETIME=[856B6130:01D01523] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Folks, I'm running slackware linux 14 32 bits as a firewall/ipsec gateway with linux 3.18.0 I got this error just after 12 hours uptime: WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0xee/0x174() NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out Modules linked in: xfrm4_tunnel af_key authenc xfrm4_mode_tunnel deflate zlib_deflate zlib_inflate ctr twofish_generic twofish_i586 twofish_common serpent_sse2_i586 serpent_generic glue_helper blowfish_generic blowfish_common cbc ecb sha512_generic hmac tunnel4 ipcomp xfrm_ipcomp esp4 xts lrw gf128mul ablk_helper cryptd aes_i586 des_generic md5 sha1_generic sha256_generic nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre nf_nat_ftp nf_conntrack_ftp xt_helper xt_mark xt_statistic xt_nat xt_multiport xt_limit xt_tcpudp xt_policy xt_conntrack iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables uhci_hcd ehci_pci tg3 ehci_hcd 8250 ptp usbcore pps_core serial_core libphy rtc_cmos r8169 usb_common mii processor thermal_sys hwmon loop [last unloaded: af_key] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0 #1 Hardware name: Hewlett-Packard HP xw4400 Workstation/0A68h, BIOS 786D7 v02.07 10/28/2010 ?00000000 c125fe2a f580bf6c c10282cb c1202130 f5904000 00000000 02b1e170 ?00000000 c1028346 00000009 f580bf6c c1302f9c f580bf84 c1202130 c1302fd5 ?0000012f c1302f9c f5904000 f812e2e0 00000000 80000100 c1202042 f580bfbc Call Trace: ?[] ? dump_stack+0x3e/0x4e ?[] ? warn_slowpath_common+0x61/0x74 ?[] ? dev_watchdog+0xee/0x174 ?[] ? warn_slowpath_fmt+0x29/0x2d ?[] ? dev_watchdog+0xee/0x174 ?[] ? pfifo_fast_dequeue+0xa2/0xa2 ?[] ? call_timer_fn.isra.30+0xf/0x5a ?[] ? run_timer_softirq+0x126/0x16f ?[] ? __do_softirq+0x8f/0x16c ?[] ? __hrtimer_tasklet_trampoline+0x13/0x13 ?[] ? do_softirq_own_stack+0x1a/0x1f ?? [] ? irq_exit+0x31/0x70 ?[] ? smp_apic_timer_interrupt+0x30/0x39 ?[] ? apic_timer_interrupt+0x2d/0x34 ?[] ? default_idle+0x2/0x3 ?[] ? arch_cpu_idle+0x6/0x7 ?[] ? cpu_startup_entry+0xeb/0x211 ?[] ? start_kernel+0x2d2/0x2d5 ---[ end trace 71b9cfb317b62846 ]--- r8169 0000:10:00.0 eth0: link up Is this error related to ASPM? Any response are welcome. TIA Here is dmesg output Linux version 3.18.0 (root@Pleiadi) (gcc version 4.7.1 (GCC) ) #1 SMP Tue Dec 9 16:46:26 CET 2014 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bffc62ff] usable BIOS-e820: [mem 0x00000000bffc6300-0x00000000bfffffff] reserved BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.4 present. DMI: Hewlett-Packard HP xw4400 Workstation/0A68h, BIOS 786D7 v02.07 10/28/2010 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0xbffc6 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: ? 00000-9FFFF write-back ? A0000-BFFFF uncachable ? C0000-E3FFF write-protect ? E4000-EFFFF write-back ? F0000-FFFFF write-protect MTRR variable ranges enabled: ? 0 base 000000000 mask F80000000 write-back ? 1 base 080000000 mask FC0000000 write-back ? 2 disabled ? 3 disabled ? 4 disabled ? 5 disabled ? 6 disabled ? 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [c00f9bf0] initial memory mapped: [mem 0x00000000-0x017fffff] Base memory trampoline at [c009b000] 9b000 size 16384 init_memory_mapping: [mem 0x00000000-0x000fffff] ?[mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] ?[mem 0x37000000-0x373fffff] page 2M init_memory_mapping: [mem 0x30000000-0x36ffffff] ?[mem 0x30000000-0x36ffffff] page 2M init_memory_mapping: [mem 0x00100000-0x2fffffff] ?[mem 0x00100000-0x003fffff] page 4k ?[mem 0x00400000-0x2fffffff] page 2M init_memory_mapping: [mem 0x37400000-0x377fdfff] ?[mem 0x37400000-0x377fdfff] page 4k BRK [0x0141c000, 0x0141cfff] PGTABLE ACPI: Early table checksum verification disabled ACPI: RSDP 0x000E7810 000014 (v00 COMPAQ) ACPI: RSDT 0xBFFC6340 000044 (v01 HPQOEM SLIC-WKS 20101028????? 00000000) ACPI: FACP 0xBFFC63EC 000074 (v01 COMPAQ GLENWOOD 00000001????? 00000000) ACPI: DSDT 0xBFFC6763 00037B (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) ACPI: FACS 0xBFFC6300 000040 ACPI: SSDT 0xBFFC6ADE 008C6C (v01 COMPAQ DSDT_HW? 00000001 MSFT 0100000E) ACPI: APIC 0xBFFC6460 000084 (v01 COMPAQ GLENWOOD 00000001????? 00000000) ACPI: ASF! 0xBFFC64E4 000063 (v32 COMPAQ GLENWOOD 00000001????? 00000000) ACPI: MCFG 0xBFFC6547 00003C (v01 COMPAQ GLENWOOD 00000001????? 00000000) ACPI: TCPA 0xBFFC6583 000032 (v01 COMPAQ GLENWOOD 00000001????? 00000000) ACPI: SLIC 0xBFFC65B5 000176 (v01 HPQOEM SLIC-WKS 00000001????? 00000000) ACPI: HPET 0xBFFC672B 000038 (v01 COMPAQ GLENWOOD 00000001????? 00000000) ACPI: Local APIC address 0xfee00000 2183MB HIGHMEM available. 887MB LOWMEM available. ? mapped low ram: 0 - 377fe000 ? low ram: 0 - 377fe000 BRK [0x0141d000, 0x0141dfff] PGTABLE Zone ranges: ? DMA????? [mem 0x00001000-0x00ffffff] ? Normal?? [mem 0x01000000-0x377fdfff] ? HighMem? [mem 0x377fe000-0xbffc5fff] Movable zone start for each node Early memory node ranges ? node?? 0: [mem 0x00001000-0x0009efff] ? node?? 0: [mem 0x00100000-0xbffc5fff] Initmem setup node 0 [mem 0x00001000-0xbffc5fff] On node 0 totalpages: 786276 free_area_init_node: node 0, pgdat c13542c0, node_mem_map f5ffe020 ? DMA zone: 32 pages used for memmap ? DMA zone: 0 pages reserved ? DMA zone: 3998 pages, LIFO batch:0 ? Normal zone: 1744 pages used for memmap ? Normal zone: 223230 pages, LIFO batch:31 ? HighMem zone: 4368 pages used for memmap ? HighMem zone: 559048 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 2 CPUs, 0 hotplug CPUs e820: [mem 0xc0000000-0xefffffff] available for PCI devices setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @f5fd0000 s25664 r0 d31680 u57344 pcpu-alloc: s25664 r0 d31680 u57344 alloc=14*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on.? Total pages: 784500 Kernel command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:000bffc6) Initializing Movable for node 0 (00000000:00000000) Memory: 3115256K/3145104K available (2448K kernel code, 182K rwdata, 788K rodata, 332K init, 404K bss, 29848K reserved, 2236192K highmem) virtual kernel memory layout: ??? fixmap? : 0xfff8f000 - 0xfffff000?? ( 448 kB) ??? pkmap?? : 0xff800000 - 0xffc00000?? (4096 kB) ??? vmalloc : 0xf7ffe000 - 0xff7fe000?? ( 120 MB) ??? lowmem? : 0xc0000000 - 0xf77fe000?? ( 887 MB) ????? .init : 0xc135a000 - 0xc13ad000?? ( 332 kB) ????? .data : 0xc126462f - 0xc1358a40?? ( 977 kB) ????? .text : 0xc1000000 - 0xc126462f?? (2449 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:440 0 CPU 0 irqstacks, hard=f5808000 soft=f580a000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2400.197 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.39 BogoMIPS (lpj=2400197) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20140926 ACPI: All ACPI Tables successfully acquired Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 Freeing SMP alternatives memory: 12K (c13ad000 - c13b0000) Enabling APIC mode:? Flat.? Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Core(TM)2 CPU????????? 6600? @ 2.40GHz (fam: 06, model: 0f, stepping: 06) Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver. perf_event_intel: PEBS disabled due to CPU errata ... version:??????????????? 2 ... bit width:????????????? 40 ... generic registers:????? 2 ... value mask:???????????? 000000ffffffffff ... max period:???????????? 000000007fffffff ... fixed-purpose events:?? 3 ... event mask:???????????? 0000000700000003 CPU 1 irqstacks, hard=f5892000 soft=f5894000 x86: Booting SMP configuration: .... node? #0, CPUs:????? #1 Initializing CPU#1 x86: Booted up 1 node, 2 CPUs smpboot: Total of 2 processors activated (9600.78 BogoMIPS) devtmpfs: initialized NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xF5A10000 0004DF (v01 COMPAQ CPU_TM2? 00000001 MSFT 0100000E) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20140926/nsarguments-189) ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20140926/dsfield-211) ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f58326c0), AE_ALREADY_EXISTS (20140926/psparse-536) acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfebfffff] pci_bus 0000:00: root bus resource [io? 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io? 0x1000-0x2fff] pci_bus 0000:00: root bus resource [io? 0x3000-0x6fff] pci_bus 0000:00: root bus resource [io? 0x7000-0xafff] pci_bus 0000:00: root bus resource [io? 0xb000-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff] pci 0000:00:00.0: [8086:277c] type 00 class 0x060000 pci 0000:00:01.0: [8086:277d] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 0x20: [io? 0x4000-0x401f] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 0x20: [io? 0x4020-0x403f] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 0x20: [io? 0x4040-0x405f] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 pci 0000:00:1d.3: reg 0x20: [io? 0x4060-0x407f] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 0x10: [mem 0xe9004000-0xe90043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 pci 0000:00:1f.0: can't claim BAR 7 [io? 0xf800-0xf87f]: address conflict with ACPI CPU throttle [io? 0xf810-0xf815] pci 0000:00:1f.0: quirk: [io? 0xfa00-0xfa3f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a pci 0000:00:1f.1: reg 0x10: [io? 0x40c0-0x40c7] pci 0000:00:1f.1: reg 0x14: [io? 0x40e0-0x40e3] pci 0000:00:1f.1: reg 0x18: [io? 0x40c8-0x40cf] pci 0000:00:1f.1: reg 0x1c: [io? 0x40e4-0x40e7] pci 0000:00:1f.1: reg 0x20: [io? 0x40a0-0x40af] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io? 0x01f0-0x01f7] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io? 0x03f6] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io? 0x0170-0x0177] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io? 0x0376] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io? 0x40d0-0x40d7] pci 0000:00:1f.2: reg 0x14: [io? 0x40e8-0x40eb] pci 0000:00:1f.2: reg 0x18: [io? 0x40d8-0x40df] pci 0000:00:1f.2: reg 0x1c: [io? 0x40ec-0x40ef] pci 0000:00:1f.2: reg 0x20: [io? 0x40b0-0x40bf] pci 0000:00:1f.2: reg 0x24: [mem 0xe9004400-0xe90047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:01:00.0: [1002:5b63] type 00 class 0x030000 pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref] pci 0000:01:00.0: reg 0x14: [io? 0x3000-0x30ff] pci 0000:01:00.0: reg 0x18: [mem 0xe8b00000-0xe8b0ffff] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:5b73] type 00 class 0x038000 pci 0000:01:00.1: reg 0x10: [mem 0xe8b10000-0xe8b1ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.? You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0:?? bridge window [io? 0x3000-0x3fff] pci 0000:00:01.0:?? bridge window [mem 0xe8b00000-0xe8dfffff] pci 0000:00:01.0:?? bridge window [mem 0xe0000000-0xe81fffff 64bit pref] pci 0000:10:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:10:00.0: reg 0x10: [io? 0x2000-0x20ff] pci 0000:10:00.0: reg 0x18: [mem 0xe9600000-0xe9600fff 64bit] pci 0000:10:00.0: reg 0x20: [mem 0xe8500000-0xe850ffff 64bit pref] pci 0000:10:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:10:00.0: supports D1 D2 pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 10] pci 0000:00:1c.0:?? bridge window [io? 0x2000-0x2fff] pci 0000:00:1c.0:?? bridge window [mem 0xe9400000-0xe96fffff] pci 0000:00:1c.0:?? bridge window [mem 0xe8500000-0xe87fffff 64bit pref] pci 0000:28:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:28:00.0: reg 0x10: [io? 0x1000-0x10ff] pci 0000:28:00.0: reg 0x18: [mem 0xe9100000-0xe9100fff 64bit] pci 0000:28:00.0: reg 0x20: [mem 0xe8400000-0xe840ffff 64bit pref] pci 0000:28:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:28:00.0: supports D1 D2 pci 0000:28:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.4: PCI bridge to [bus 28] pci 0000:00:1c.4:?? bridge window [io? 0x1000-0x1fff] pci 0000:00:1c.4:?? bridge window [mem 0xe9100000-0xe93fffff] pci 0000:00:1c.4:?? bridge window [mem 0xe8200000-0xe84fffff 64bit pref] pci 0000:3f:00.0: [14e4:167b] type 00 class 0x020000 pci 0000:3f:00.0: reg 0x10: [mem 0xe8a00000-0xe8a0ffff 64bit] pci 0000:3f:00.0: PME# supported from D3hot D3cold pci 0000:00:1c.5: PCI bridge to [bus 3f] pci 0000:00:1c.5:?? bridge window [mem 0xe8800000-0xe8afffff] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) pci 0000:00:1e.0:?? bridge window [mem 0xf4000000-0xfebfffff] (subtractive decode) pci 0000:00:1e.0:?? bridge window [io? 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0:?? bridge window [io? 0x1000-0x2fff] (subtractive decode) pci 0000:00:1e.0:?? bridge window [io? 0x3000-0x6fff] (subtractive decode) pci 0000:00:1e.0:?? bridge window [io? 0x7000-0xafff] (subtractive decode) pci 0000:00:1e.0:?? bridge window [io? 0xb000-0xffff] (subtractive decode) pci 0000:00:1e.0:?? bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0:?? bridge window [mem 0xc0000000-0xefffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. vgaarb: setting as boot device: PCI:0000:01:00.0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbffc6300-0xbfffffff] HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to clocksource hpet pnp: PnP ACPI init pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:03: [dma 3] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) pnp 00:05: [dma 2] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) system 00:06: [io? 0x04d0-0x04d1] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:07: [io? 0x4e00-0x4e01] has been reserved system 00:07: [io? 0x0400-0x048f] has been reserved system 00:07: [io? 0x0cb0-0x0cbf] has been reserved system 00:07: [io? 0xf800-0xf87f] could not be reserved system 00:07: [io? 0xfa00-0xfa3f] has been reserved system 00:07: [io? 0xfc00-0xfc7f] has been reserved system 00:07: [io? 0xfc80-0xfcff] has been reserved system 00:07: [io? 0x0cb0-0x0cbf] has been reserved system 00:07: [io? 0xfe80-0xfeff] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved system 00:08: [mem 0x000d4000-0x000fffff] could not be reserved system 00:08: [mem 0xfec01000-0xfecfffff] has been reserved system 00:08: [mem 0xfed00400-0xfed3ffff] has been reserved system 00:08: [mem 0xfed40000-0xffffffff] could not be reserved system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:08: [mem 0x000cd000-0x000e3fff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 9 devices pci 0000:00:1c.5: bridge window [io? 0x1000-0x0fff] to [bus 3f] add_size 1000 pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3f] add_size 200000 pci 0000:00:1f.0: BAR 7: [io? 0xf800-0xf87f] has bogus alignment pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.5: res[7]=[io? 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:1c.5: BAR 9: assigned [mem 0xf4000000-0xf41fffff 64bit pref] pci 0000:00:1b.0: BAR 0: assigned [mem 0xf4200000-0xf4203fff 64bit] pci 0000:00:1c.5: BAR 7: assigned [io? 0x5000-0x5fff] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8b20000-0xe8b3ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0:?? bridge window [io? 0x3000-0x3fff] pci 0000:00:01.0:?? bridge window [mem 0xe8b00000-0xe8dfffff] pci 0000:00:01.0:?? bridge window [mem 0xe0000000-0xe81fffff 64bit pref] pci 0000:10:00.0: BAR 6: assigned [mem 0xe9400000-0xe941ffff pref] pci 0000:00:1c.0: PCI bridge to [bus 10] pci 0000:00:1c.0:?? bridge window [io? 0x2000-0x2fff] pci 0000:00:1c.0:?? bridge window [mem 0xe9400000-0xe96fffff] pci 0000:00:1c.0:?? bridge window [mem 0xe8500000-0xe87fffff 64bit pref] pci 0000:28:00.0: BAR 6: assigned [mem 0xe9120000-0xe913ffff pref] pci 0000:00:1c.4: PCI bridge to [bus 28] pci 0000:00:1c.4:?? bridge window [io? 0x1000-0x1fff] pci 0000:00:1c.4:?? bridge window [mem 0xe9100000-0xe93fffff] pci 0000:00:1c.4:?? bridge window [mem 0xe8200000-0xe84fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 3f] pci 0000:00:1c.5:?? bridge window [io? 0x5000-0x5fff] pci 0000:00:1c.5:?? bridge window [mem 0xe8800000-0xe8afffff] pci 0000:00:1c.5:?? bridge window [mem 0xf4000000-0xf41fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05] pci_bus 0000:00: resource 4 [mem 0xf4000000-0xfebfffff] pci_bus 0000:00: resource 5 [io? 0x0000-0x0cf7] pci_bus 0000:00: resource 6 [io? 0x1000-0x2fff] pci_bus 0000:00: resource 7 [io? 0x3000-0x6fff] pci_bus 0000:00: resource 8 [io? 0x7000-0xafff] pci_bus 0000:00: resource 9 [io? 0xb000-0xffff] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xefffffff] pci_bus 0000:01: resource 0 [io? 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xe8b00000-0xe8dfffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe81fffff 64bit pref] pci_bus 0000:10: resource 0 [io? 0x2000-0x2fff] pci_bus 0000:10: resource 1 [mem 0xe9400000-0xe96fffff] pci_bus 0000:10: resource 2 [mem 0xe8500000-0xe87fffff 64bit pref] pci_bus 0000:28: resource 0 [io? 0x1000-0x1fff] pci_bus 0000:28: resource 1 [mem 0xe9100000-0xe93fffff] pci_bus 0000:28: resource 2 [mem 0xe8200000-0xe84fffff 64bit pref] pci_bus 0000:3f: resource 0 [io? 0x5000-0x5fff] pci_bus 0000:3f: resource 1 [mem 0xe8800000-0xe8afffff] pci_bus 0000:3f: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref] pci_bus 0000:05: resource 4 [mem 0xf4000000-0xfebfffff] pci_bus 0000:05: resource 5 [io? 0x0000-0x0cf7] pci_bus 0000:05: resource 6 [io? 0x1000-0x2fff] pci_bus 0000:05: resource 7 [io? 0x3000-0x6fff] pci_bus 0000:05: resource 8 [io? 0x7000-0xafff] pci_bus 0000:05: resource 9 [io? 0xb000-0xffff] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 11 [mem 0xc0000000-0xefffffff] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Video device with shadowed ROM PCI: CLS 64 bytes, default 64 futex hash table entries: 512 (order: 3, 32768 bytes) SGI XFS with security attributes, no debug enabled msgmni has been set to 1716 bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part scsi host0: ahci scsi host1: ahci scsi host2: ahci scsi host3: ahci ata1: SATA max UDMA/133 abar m1024@0xe9004400 port 0xe9004500 irq 28 ata2: SATA max UDMA/133 abar m1024@0xe9004400 port 0xe9004580 irq 28 ata3: SATA max UDMA/133 abar m1024@0xe9004400 port 0xe9004600 irq 28 ata4: SATA max UDMA/133 abar m1024@0xe9004400 port 0xe9004680 irq 28 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI Shortcut mode drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata1.00: supports DRM functions and may not be fully accessible ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 ata1.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L9, DXT02L5Q, max UDMA/133 ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA ata4: SATA link down (SStatus 0 SControl 300) ata1.00: supports DRM functions and may not be fully accessible ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access???? ATA????? SAMSUNG MZ7TD256 2L5Q PQ: 0 ANSI: 5 ata3: SATA link down (SStatus 0 SControl 300) sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ?sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10> sd 0:0:0:0: [sda] Attached SCSI disk XFS (sda1): Mounting V4 Filesystem XFS (sda1): Ending clean mount VFS: Mounted root (xfs filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 332K (c135a000 - c13ad000) loop: module loaded udevd[543]: starting version 182 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control r8169 0000:10:00.0: irq 29 for MSI/MSI-X r8169 0000:10:00.0 eth0: RTL8168c/8111c at 0xf8130000, 00:e0:4c:68:48:d2, XID 1c4000c0 IRQ 29 r8169 0000:10:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:28:00.0: can't disable ASPM; OS doesn't have ASPM control r8169 0000:28:00.0: irq 30 for MSI/MSI-X r8169 0000:28:00.0 eth1: RTL8168c/8111c at 0xf8132000, 00:e0:4c:68:48:2b, XID 1c4000c0 IRQ 30 r8169 0000:28:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko] ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver PTP clock support registered uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00004020 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00004040 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004060 hub 4-0:1.0: USB hub found tg3.c:v3.137 (May 11, 2014) hub 4-0:1.0: 2 ports detected serial 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 64 is not supported ehci-pci 0000:00:1d.7: irq 20, io mem 0xe9004000 tg3 0000:3f:00.0 eth2: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1a:4b:44:37:50 tg3 0000:3f:00.0 eth2: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:3f:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:3f:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Adding 9076688k swap on /dev/sda10.? Priority:-1 extents:1 across:9076688k SS tsc: Refined TSC clocksource calibration: 2400.084 MHz Switched to clocksource tsc XFS (sda5): Mounting V4 Filesystem XFS (sda5): Ending clean mount XFS (sda6): Mounting V4 Filesystem XFS (sda6): Ending clean mount XFS (sda7): Mounting V4 Filesystem XFS (sda7): Ending clean mount XFS (sda8): Mounting V4 Filesystem XFS (sda8): Ending clean mount XFS (sda9): Mounting V4 Filesystem XFS (sda9): Ending clean mount random: dd urandom read with 85 bits of entropy available r8169 0000:10:00.0 eth0: link down r8169 0000:10:00.0 eth0: link down r8169 0000:28:00.0 eth1: link down r8169 0000:28:00.0 eth1: link down tg3 0000:3f:00.0: irq 31 for MSI/MSI-X ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) tg3 0000:3f:00.0 eth2: Link is up at 100 Mbps, full duplex tg3 0000:3f:00.0 eth2: Flow control is off for TX and off for RX r8169 0000:28:00.0 eth1: link up r8169 0000:10:00.0 eth0: link up NET: Registered protocol family 15 capability: warning: `squid' uses 32-bit capabilities (legacy support in use) nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. random: nonblocking pool is initialized -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/