Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965349AbaLKWBB (ORCPT ); Thu, 11 Dec 2014 17:01:01 -0500 Received: from cantor2.suse.de ([195.135.220.15]:42410 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754440AbaLKWA5 (ORCPT ); Thu, 11 Dec 2014 17:00:57 -0500 From: NeilBrown To: Grant Likely , Greg Kroah-Hartman , Mark Rutland , Jiri Slaby Date: Fri, 12 Dec 2014 08:59:44 +1100 Subject: [PATCH 3/3] TTY/slave: add driver for w2sg0004 GPS Cc: NeilBrown , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Message-ID: <20141211215944.4127.57146.stgit@notabene.brown> In-Reply-To: <20141211214801.4127.93914.stgit@notabene.brown> References: <20141211214801.4127.93914.stgit@notabene.brown> User-Agent: StGit/0.17.1-dirty MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This uart-attatched GPS device has a toggle which turns both on and off. For reliable use we need to know what start it is in. So it registers with the tty for recv events when the tty is open, and optionally configures the RX pin as a GPIO interrupt when the tty is closed. If it detects data when it should be off, or a lack of data when it should be on, it toggles the line. A regulator can also be configured to power the antenna. In this case an rfkill device is created. When the rfkill is 'blocked' or the device is otherwise powered down, the regulator is turned off. Signed-off-by: NeilBrown --- .../devicetree/bindings/serial/slave-w2sg0004.txt | 35 ++ drivers/tty/slaves/Kconfig | 6 drivers/tty/slaves/Makefile | 3 drivers/tty/slaves/tty-w2sg0004.c | 412 ++++++++++++++++++++ 4 files changed, 455 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/serial/slave-w2sg0004.txt create mode 100644 drivers/tty/slaves/tty-w2sg0004.c diff --git a/Documentation/devicetree/bindings/serial/slave-w2sg0004.txt b/Documentation/devicetree/bindings/serial/slave-w2sg0004.txt new file mode 100644 index 000000000000..c9e7838b3198 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/slave-w2sg0004.txt @@ -0,0 +1,35 @@ +w2sg0004 UART-attached GPS receiver + +Required properties: +- compatbile: "tty,w2sg0004" +- gpios: gpio used to toggle 'on/off' pin +- interrupts: interrupt generated by RX pin when device should + be idle +- pinctrl: "default", "idle" + "idle" setting is active when device should be off. + This can remap the RX pin to a GPIO interrupt. + +Optional properties: +- vdd-supply: regulator, e.g. to power antenna + + +The w2sg0004 uses a pin-toggle both to power-on and to +power-off, so the driver needs to detect what state it is in. +It does this by detecting characters on the RX line. +When it should be off, these can optionally be detected by a GPIO. + +The node for this device must be the child of a UART. + +Example: +&uart2 { + gps { + compatible = "tty,w2sg0004"; + vdd-supply = <&vsim>; + gpios = <&gpio5 17 0>; /* GPIO_145 */ + interrupts-extended = <&gpio5 19 0>; /* GPIO_147 */ + /* When idle, switch RX to be an interrupt */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart2_pins>; + pinctrl-1 = <&uart2_pins_rx_gpio>; + }; +}; diff --git a/drivers/tty/slaves/Kconfig b/drivers/tty/slaves/Kconfig index 2dd1acf80f8c..7a669faaf02d 100644 --- a/drivers/tty/slaves/Kconfig +++ b/drivers/tty/slaves/Kconfig @@ -9,4 +9,10 @@ if TTY_SLAVE config TTY_SLAVE_REGULATOR tristate "TTY slave device powered by regulator" +config TTY_SLAVE_W2SG0004 + tristate "W2SG0004 GPS on/off control" + help + Enable on/off control of W2SG0004 GPS when attached + to a UART. + endif diff --git a/drivers/tty/slaves/Makefile b/drivers/tty/slaves/Makefile index e636bf49f1cc..ba528fa27110 100644 --- a/drivers/tty/slaves/Makefile +++ b/drivers/tty/slaves/Makefile @@ -1,2 +1,3 @@ -obj-$(CONFIG_TTY_SLAVE_REGULATOR) += tty-reg.o +obj-$(CONFIG_TTY_SLAVE_REGULATOR) += tty-reg.o +obj-$(CONFIG_TTY_SLAVE_W2SG0004) += tty-w2sg0004.o diff --git a/drivers/tty/slaves/tty-w2sg0004.c b/drivers/tty/slaves/tty-w2sg0004.c new file mode 100644 index 000000000000..7c7ae479bf41 --- /dev/null +++ b/drivers/tty/slaves/tty-w2sg0004.c @@ -0,0 +1,412 @@ +/* + * tty-w2sg0004.c - tty-slave for w2sg0004 GPS device + * + * Copyright (C) 2014 NeilBrown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The w2sg0004 is turned 'on' or 'off' by toggling a line, which + * is normally connected to a GPIO. Thus you need to know the current + * state in order to determine how to achieve some particular state. + * The only way to detect the state is by detecting transitions on + * its TX line (our RX line). + * So this tty slave listens for 'recv' events and deduces the GPS is + * on if it has received one recently. + * If suitably configure, and if the hardware is capable, it also + * enables an interrupt (presumably via a GPIO connected to the RX + * line via pinctrl) when the tty is inactive and treat and interrupts + * as an indication that the device is 'on' and should be turned 'off'. + * + * Driver also listens for open/close and trys to turn the GPS on if it is + * off and the tty is open. On final 'close', the GPS is then turned + * off. + * + * When the device is opened, the GPIO is toggled immediately and then + * again after 2 seconds of no data. If there is still no data the + * toggle happens are 4, 8, 16 seconds etc. + * + * When the device is closed, the GPIO is toggled immediately and + * if interrupts are received after 1 second it is toggled again + * (and again and again with exponentially increasing delays while + * interrupts continue). + * + * If a regulator is configured (e.g. to power the antenna), that is + * enabled/disabled on open/close. + * + * During system suspend the GPS is turned off even if the tty is + * open. No repeat attempts are made. + * Possibly it should be possible to keep the GPS on with some + * configuration. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct w2sg_data { + int gpio; + int irq; /* irq line from RX pin when pinctrl + * set to 'idle' */ + struct regulator *reg; + + unsigned long last_toggle; /* jiffies when last toggle completed. */ + unsigned long backoff; /* jiffies since last_toggle when + * we try again + */ + enum {Idle, Down, Up} state; /* state-machine state. */ + bool requested, is_on; + bool suspended; + bool reg_enabled; + + struct delayed_work work; + spinlock_t lock; + struct device *dev; + + struct rfkill *rfkill; +}; + +/* + * There seems to restrictions on how quickly we can toggle the + * on/off line. Data sheets says "two rtc ticks", whatever that means. + * If we do it too soon it doesn't work. + * So we have a state machine which uses the common work queue to ensure + * clean transitions. + * When a change is requested we record that request and only act on it + * once the previous change has completed. + * A change involves a 10ms low pulse, and a 10ms raised level. + */ + +static void toggle_work(struct work_struct *work) +{ + struct w2sg_data *data = container_of( + work, struct w2sg_data, work.work); + + spin_lock_irq(&data->lock); + switch (data->state) { + case Up: + data->state = Idle; + if (data->requested == data->is_on) + break; + if (!data->requested) + /* Assume it is off unless activity is detected */ + break; + /* Try again in a while unless we get some activity */ + dev_dbg(data->dev, "Wait %dusec until retry\n", + jiffies_to_msecs(data->backoff)); + schedule_delayed_work(&data->work, data->backoff); + break; + case Idle: + if (data->requested == data->is_on) + break; + + /* Time to toggle */ + dev_dbg(data->dev, "Starting toggle to turn %s\n", + data->requested ? "on" : "off"); + data->state = Down; + spin_unlock_irq(&data->lock); + gpio_set_value_cansleep(data->gpio, 0); + schedule_delayed_work(&data->work, + msecs_to_jiffies(10)); + return; + + case Down: + data->state = Up; + data->last_toggle = jiffies; + dev_dbg(data->dev, "Toggle completed, should be %s now.\n", + data->is_on ? "off" : "on"); + data->is_on = ! data->is_on; + spin_unlock_irq(&data->lock); + + gpio_set_value_cansleep(data->gpio, 1); + schedule_delayed_work(&data->work, + msecs_to_jiffies(10)); + return; + } + spin_unlock_irq(&data->lock); +} + +static irqreturn_t tty_w2_isr(int irq, void *dev_id) +{ + struct w2sg_data *data = dev_id; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + if (!data->requested && !data->is_on && data->state == Idle && + time_after(jiffies, data->last_toggle + data->backoff)) { + data->is_on = 1; + data->backoff *= 2; + dev_dbg(data->dev, "Received data, must be on. Try to turn off\n"); + if (!data->suspended) + schedule_delayed_work(&data->work, 0); + } + spin_unlock_irqrestore(&data->lock, flags); + return IRQ_HANDLED; +} + +static int tty_w2_runtime_resume(struct device *slave) +{ + struct w2sg_data *data = dev_get_drvdata(slave); + unsigned long flags; + + if (!data->reg_enabled && + data->reg && + !rfkill_blocked(data->rfkill)) + if (regulator_enable(data->reg) == 0) + data->reg_enabled = true; + + spin_lock_irqsave(&data->lock, flags); + if (!data->requested) { + dev_dbg(data->dev, "Device open - turn GPS on\n"); + data->requested = true; + data->backoff = HZ; + if (data->irq) { + disable_irq(data->irq); + pinctrl_pm_select_default_state(slave); + } + if (!data->suspended && data->state == Idle) + schedule_delayed_work(&data->work, 0); + } + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int tty_w2_rfkill_set_block(void *vdata, bool blocked) +{ + struct w2sg_data *data = vdata; + + dev_dbg(data->dev, "rfkill_set_blocked %d\n", blocked); + if (blocked && data->reg_enabled) + if (regulator_disable(data->reg) == 0) + data->reg_enabled = false; + if (!blocked && + !data->reg_enabled && data->reg && + !pm_runtime_suspended(data->dev)) + if (regulator_enable(data->reg) == 0) + data->reg_enabled = true; + return 0; +} + +static struct rfkill_ops tty_w2_rfkill_ops = { + .set_block = tty_w2_rfkill_set_block, +}; + +static int tty_w2_runtime_suspend(struct device *slave) +{ + struct w2sg_data *data = dev_get_drvdata(slave); + unsigned long flags; + + dev_dbg(data->dev, "Device closed - turn GPS off\n"); + if (data->reg && data->reg_enabled) + if (regulator_disable(data->reg) == 0) + data->reg_enabled = false; + + spin_lock_irqsave(&data->lock, flags); + if (data->requested) { + data->requested = false; + data->backoff = HZ; + if (data->irq) { + pinctrl_pm_select_idle_state(slave); + enable_irq(data->irq); + } + if (!data->suspended && data->state == Idle) + schedule_delayed_work(&data->work, 0); + } + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int tty_w2_suspend(struct device *dev) +{ + /* Ignore incoming data and just turn device off. + * we cannot really wait for a separate thread to + * do things, so we disable that and do it all + * here + */ + struct w2sg_data *data = dev_get_drvdata(dev); + + spin_lock_irq(&data->lock); + data->suspended = true; + spin_unlock_irq(&data->lock); + + cancel_delayed_work_sync(&data->work); + if (data->state == Down) { + dev_dbg(data->dev, "Suspending while GPIO down - raising\n"); + msleep(10); + gpio_set_value_cansleep(data->gpio, 1); + data->last_toggle = jiffies; + data->is_on = !data->is_on; + data->state = Up; + } + if (data->state == Up) { + msleep(10); + data->state = Idle; + } + if (data->is_on) { + dev_dbg(data->dev, "Suspending while GPS on: toggling\n"); + gpio_set_value_cansleep(data->gpio, 0); + msleep(10); + gpio_set_value_cansleep(data->gpio, 1); + data->is_on = 0; + } + return 0; +} + +static int tty_w2_resume(struct device *dev) +{ + struct w2sg_data *data = dev_get_drvdata(dev); + + spin_lock_irq(&data->lock); + data->suspended = false; + spin_unlock_irq(&data->lock); + schedule_delayed_work(&data->work, 0); + return 0; +} + +static const struct dev_pm_ops tty_w2_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tty_w2_suspend, tty_w2_resume) + SET_RUNTIME_PM_OPS(tty_w2_runtime_suspend, + tty_w2_runtime_resume, + NULL) +}; + +static bool toggle_on_probe = false; + +static int tty_w2_probe(struct platform_device *pdev) +{ + struct w2sg_data *data; + struct regulator *reg; + int err; + + if (pdev->dev.parent == NULL) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + reg = devm_regulator_get(&pdev->dev, "vdd"); + if (IS_ERR(reg)) { + err = PTR_ERR(reg); + if (err != -ENODEV) + goto out; + } else + data->reg = reg; + + data->irq = platform_get_irq(pdev, 0); + if (data->irq < 0) { + err = data->irq; + goto out; + } + dev_dbg(&pdev->dev, "IRQ configured: %d\n", data->irq); + + data->last_toggle = jiffies; + data->backoff = HZ; + data->state = Idle; + data->gpio = of_get_named_gpio(pdev->dev.of_node, "gpios", 0); + if (data->gpio < 0) { + err = data->gpio; + goto out; + } + dev_dbg(&pdev->dev, "GPIO configured: %d\n", data->gpio); + spin_lock_init(&data->lock); + INIT_DELAYED_WORK(&data->work, toggle_work); + err = devm_gpio_request_one(&pdev->dev, data->gpio, + GPIOF_OUT_INIT_HIGH, + "tty-w2sg0004-on-off"); + if (err) + goto out; + + if (data->irq) { + irq_set_status_flags(data->irq, IRQ_NOAUTOEN); + err = devm_request_irq(&pdev->dev, data->irq, tty_w2_isr, + IRQF_TRIGGER_FALLING, + "tty-w2sg0004", data); + } + if (err) + goto out; + + if (data->reg) { + data->rfkill = rfkill_alloc("GPS", &pdev->dev, RFKILL_TYPE_GPS, + &tty_w2_rfkill_ops, data); + if (!data->rfkill) { + err = -ENOMEM; + goto out; + } + err = rfkill_register(data->rfkill); + if (err) { + dev_err(&pdev->dev, "Cannot register rfkill device"); + rfkill_destroy(data->rfkill); + goto out; + } + } + platform_set_drvdata(pdev, data); + data->dev = &pdev->dev; + pm_runtime_enable(&pdev->dev); + if (data->irq) { + pinctrl_pm_select_idle_state(&pdev->dev); + enable_irq(data->irq); + } + if (toggle_on_probe) { + dev_dbg(data->dev, "Performing initial toggle\n"); + gpio_set_value_cansleep(data->gpio, 0); + msleep(10); + gpio_set_value_cansleep(data->gpio, 1); + msleep(10); + } +out: + dev_dbg(data->dev, "Probed: err=%d\n", err); + return err; +} +module_param(toggle_on_probe, bool, 0); +MODULE_PARM_DESC(toggle_on_probe, "simulate power-on with GPS active"); + +static int tty_w2_remove(struct platform_device *pdev) +{ + struct w2sg_data *data = dev_get_drvdata(&pdev->dev); + if (data->rfkill) { + rfkill_unregister(data->rfkill); + rfkill_destroy(data->rfkill); + } + return 0; +} + +static struct of_device_id tty_w2_dt_ids[] = { + { .compatible = "tty,w2sg0004", }, + {} +}; + +static struct platform_driver tty_w2_driver = { + .driver.name = "tty-w2sg0004", + .driver.owner = THIS_MODULE, + .driver.pm = &tty_w2_pm_ops, + .driver.of_match_table = tty_w2_dt_ids, + .probe = tty_w2_probe, + .remove = tty_w2_remove, +}; + +static int __init tty_w2_init(void) +{ + return platform_driver_register(&tty_w2_driver); +} +module_init(tty_w2_init); + +static void __exit tty_w2_exit(void) +{ + platform_driver_unregister(&tty_w2_driver); +} +module_exit(tty_w2_exit); + +MODULE_AUTHOR("NeilBrown "); +MODULE_DESCRIPTION("Serial port device which turns on W2SG0004 GPS"); +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/