Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933629AbaLLETQ (ORCPT ); Thu, 11 Dec 2014 23:19:16 -0500 Received: from mail-wi0-f171.google.com ([209.85.212.171]:58292 "EHLO mail-wi0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759949AbaLLETO (ORCPT ); Thu, 11 Dec 2014 23:19:14 -0500 From: Harini Katakam To: wsa@the-dreams.de, mark.rutland@arm.com Cc: michal.simek@xilinx.com, soren.brinkmann@xilinx.com, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, harinikatakamlinux@gmail.com, harinik@xilinx.com, Vishnu Motghare Subject: [PATCH v5 2/2] i2c: cadence: Check for errata condition involving master receive Date: Fri, 12 Dec 2014 09:48:27 +0530 Message-Id: <1418357907-4215-3-git-send-email-harinik@xilinx.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1418357907-4215-1-git-send-email-harinik@xilinx.com> References: <1418357907-4215-1-git-send-email-harinik@xilinx.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Cadence I2C controller has the following bugs: - completion indication is not given to the driver at the end of a read/receive transfer with HOLD bit set. - Invalid read transaction are generated on the bus when HW timeout condition occurs with HOLD bit set. As a result of the above, if a set of messages to be transferred with repeated start includes any transfer following a read transfer, completion is never indicated and timeout occurs. Hence a check is implemented to return -EOPNOTSUPP for such sequences. Signed-off-by: Harini Katakam Signed-off-by: Vishnu Motghare --- v5: Make warning grepable in driver. v4: Use single dev_warn and make message grep-able. v3: Add warning in case of unsupported transfer. v2: Dont defeteature repeated start. Just check for unsupported conditions in the driver and return error. --- drivers/i2c/busses/i2c-cadence.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 5f5d4fa..6538c6c 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -541,6 +541,18 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, * processed with a repeated start. */ if (num > 1) { + /* + * This controller does not give completion interrupt after a + * master receive transfer if HOLD bit is set (repeated start), + * resulting in SW timeout. Hence, if a receive transfer is + * followed by any other transfer, an error is returned + * indicating that this sequence is not supported. + */ + for (count = 0; count < num-1; count++) { + if (msgs[count].flags & I2C_M_RD) + dev_warn(adap->dev.parent, "No support for repeated start when receive is followed by a transfer\n"); + return -EOPNOTSUPP; + } id->bus_hold_flag = 1; reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET); reg |= CDNS_I2C_CR_HOLD; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/