Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 1 Jan 2003 10:31:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 1 Jan 2003 10:31:59 -0500 Received: from mail.mediaways.net ([193.189.224.113]:26870 "HELO mail.mediaways.net") by vger.kernel.org with SMTP id ; Wed, 1 Jan 2003 10:31:39 -0500 Subject: ide harddisk freeze WDC WD1800JB vs VIA VT8235 From: Soeren Sonnenburg To: linux-kernel@vger.kernel.org Content-Type: multipart/mixed; boundary="=-wqy7rk0x1tG+l0mCe8qu" Organization: Message-Id: <1041435181.983.76.camel@sun> Mime-Version: 1.0 Date: 01 Jan 2003 16:33:01 +0100 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 43013 Lines: 1490 --=-wqy7rk0x1tG+l0mCe8qu Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi. I still get harddisk freezes on 2 WD1800JB drives (asus A7V8X mobo), i.e., I have to powercycle the system to get the harddisk back working. A cold reset is not enough. The harddisks are connected to the primary and secondary via vt8235 controller (both disks are master). When a harddisk 'freezes' the ide-light is continuosly on. When that happens the machine is still ping-able but since these two disk form a software raid0 the machine hangs on disk access. This problem happens like once in a week....and very seldom within 3 days. The system is athlon xp 2.4G+ a7v8x mainboard 1.5g ddr333 memory kernel 2.4.21-pre2 (did not work with 2.4.20 that is why I went to the pre version) So far I have ruled out the following: - it is not a cable problem (tested several cables) - the memory of the machine seems to be ok (memtest ran for 2 days without reporting an error) - it is not a problem of the power supply (tested another powersupply) - the harddisk are ok ( I ran the vendors check program ) Now it could be that the via vt8235 chipset has a bug, the linux ide handling code is buggy or the firmware of the drive is not ok. It is probably a vt8235 problem or linux driver problem since a I know of 8 wdc1800jb disks with that firmware version running since >1month in a hardware raid setup without problems. I attached the kernel config, dmesg, and hdparm -I of one of the drives. If you have any ideas/ need further infos don't hesitate to contact me. Thanks in advance, Soeren. --=-wqy7rk0x1tG+l0mCe8qu Content-Disposition: attachment; filename=config Content-Type: text/plain; name=config; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 7bit # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y CONFIG_HIGHIO=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set # CONFIG_HOTPLUG_PCI_IBM is not set # CONFIG_HOTPLUG_PCI_ACPI is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_PM=y CONFIG_ACPI=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUSMGR=y CONFIG_ACPI_SYS=y CONFIG_ACPI_CPU=y CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_EC is not set # CONFIG_ACPI_CMBATT is not set # CONFIG_ACPI_THERMAL is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_BLK_STATS=y # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y # CONFIG_MD_MULTIPATH is not set CONFIG_BLK_DEV_LVM=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_FTP=y CONFIG_IP_NF_IRC=y CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_UNCLEAN=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_MIRROR=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IP_NF_NAT_SNMP_BASIC=y CONFIG_IP_NF_NAT_IRC=y CONFIG_IP_NF_NAT_FTP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m CONFIG_IDE_TASK_IOCTL=y # CONFIG_IDE_TASKFILE_IO is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NFORCE is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y CONFIG_IDEDMA_IVB=y # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_PDC202XX=y CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_DEBUG_QUEUES is not set CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # CONFIG_INPUT=y # CONFIG_INPUT_KEYBDEV is not set CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # CONFIG_I2C=m CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_PHILIPSPAR is not set # CONFIG_I2C_ELV is not set # CONFIG_I2C_VELLEMAN is not set # CONFIG_I2C_PPORT is not set # CONFIG_I2C_FRODO is not set # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_CHARDEV=m CONFIG_I2C_PROC=m # # Hardware sensors mainboard support # # CONFIG_I2C_MAINBOARD is not set # # Hardware sensors chip support # # CONFIG_SENSORS is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_INPUT_NS558 is not set # CONFIG_INPUT_LIGHTNING is not set # CONFIG_INPUT_PCIGAME is not set # CONFIG_INPUT_CS461X is not set # CONFIG_INPUT_EMU10K1 is not set # CONFIG_INPUT_SERIO is not set # CONFIG_INPUT_SERPORT is not set # CONFIG_INPUT_ANALOG is not set # CONFIG_INPUT_A3D is not set # CONFIG_INPUT_ADI is not set # CONFIG_INPUT_COBRA is not set # CONFIG_INPUT_GF2K is not set # CONFIG_INPUT_GRIP is not set # CONFIG_INPUT_INTERACT is not set # CONFIG_INPUT_TMDC is not set # CONFIG_INPUT_SIDEWINDER is not set # CONFIG_INPUT_IFORCE_USB is not set # CONFIG_INPUT_IFORCE_232 is not set # CONFIG_INPUT_WARRIOR is not set # CONFIG_INPUT_MAGELLAN is not set # CONFIG_INPUT_SPACEORB is not set # CONFIG_INPUT_SPACEBALL is not set # CONFIG_INPUT_STINGER is not set # CONFIG_INPUT_DB9 is not set # CONFIG_INPUT_GAMECON is not set # CONFIG_INPUT_TURBOGRAFX is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set CONFIG_AGP_VIA=y # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_8151 is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # CONFIG_VIDEO_PROC_FS=y # CONFIG_I2C_PARPORT is not set CONFIG_VIDEO_BT848=m # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_ZORAN_BUZ is not set # CONFIG_VIDEO_ZORAN_DC10 is not set # CONFIG_VIDEO_ZORAN_LML33 is not set # CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_MEYE is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_MIROPCM20 is not set # CONFIG_RADIO_MIROPCM20_RDS is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # File systems # CONFIG_QUOTA=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=m CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_MINIX_FS=m # CONFIG_VXFS_FS is not set CONFIG_NTFS_FS=m # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_TCP=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set CONFIG_ZISOFS_FS=y # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_RIVA is not set # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_VESA=y # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FBCON_ADVANCED is not set CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_ALI5455 is not set CONFIG_SOUND_BT878=m # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_MIDI_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_FORTE is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_MIDI_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set CONFIG_SOUND_TVMIXER=m # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI=y # CONFIG_USB_UHCI_ALT is not set # CONFIG_USB_OHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_MIDI is not set CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # # Bluetooth support # CONFIG_BLUEZ=y CONFIG_BLUEZ_L2CAP=y CONFIG_BLUEZ_SCO=y # CONFIG_BLUEZ_RFCOMM is not set CONFIG_BLUEZ_BNEP=y # CONFIG_BLUEZ_BNEP_MC_FILTER is not set # CONFIG_BLUEZ_BNEP_PROTO_FILTER is not set # # Bluetooth device drivers # CONFIG_BLUEZ_HCIUSB=y CONFIG_BLUEZ_USB_ZERO_PACKET=y # CONFIG_BLUEZ_HCIUART is not set # CONFIG_BLUEZ_HCIDTL1 is not set # CONFIG_BLUEZ_HCIBT3C is not set # CONFIG_BLUEZ_HCIBLUECARD is not set # CONFIG_BLUEZ_HCIBTUART is not set # CONFIG_BLUEZ_HCIVHCI is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_FRAME_POINTER is not set # # Library routines # CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y --=-wqy7rk0x1tG+l0mCe8qu Content-Disposition: attachment; filename=dmesg Content-Type: text/plain; name=dmesg; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 7bit d, 690k data, 116k init, 655344k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(TM) XP 2400+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1999.9871 MHz. ..... host bus clock speed is 266.6648 MHz. cpu: 0, clocks: 2666648, slice: 1333324 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1720, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/3177] at 00:11.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket BlueZ Core ver 2.2 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.4.0 initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found parport0: PC-style at 0x278 (0x678) [PCSPP(,...)] Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Non-volatile memory driver v1.2 Floppy drive(s): fd0 is 1.44M spurious 8259A interrupt: IRQ7. FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 1430M agpgart: Detected Via Apollo Pro KT400 chipset agpgart: AGP aperture is 128M @ 0xf0000000 Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20268: IDE controller at PCI slot 00:0e.0 PCI: Found IRQ 10 for device 00:0e.0 PCI: Sharing IRQ 10 with 00:07.0 PCI: Sharing IRQ 10 with 00:08.0 PDC20268: chipset revision 2 PDC20268: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio PDC20268: IDE controller at PCI slot 00:0f.0 PCI: Found IRQ 7 for device 00:0f.0 PCI: Sharing IRQ 7 with 00:09.0 PDC20268: chipset revision 2 PDC20268: not 100% native mode: will probe irqs later ide4: BM-DMA at 0x8400-0x8407, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0x8408-0x840f, BIOS settings: hdk:pio, hdl:pio VP_IDE: IDE controller at PCI slot 00:11.1 PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq. VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0x7000-0x7007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x7008-0x700f, BIOS settings: hdc:DMA, hdd:pio hda: WDC WD1800JB-00DUA0, ATA DISK drive hda: DMA disabled blk: queue c03bd740, I/O limit 4095Mb (mask 0xffffffff) hdc: WDC WD1800JB-00DUA0, ATA DISK drive hdc: DMA disabled blk: queue c03bdbac, I/O limit 4095Mb (mask 0xffffffff) hdg: Maxtor 4D080K4, ATA DISK drive blk: queue c03be484, I/O limit 4095Mb (mask 0xffffffff) hdk: Maxtor 4D080H4, ATA DISK drive blk: queue c03bed5c, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide3 at 0xa800-0xa807,0xa402 on irq 10 ide5 at 0x9000-0x9007,0x8802 on irq 7 hda: host protected area => 1 hda: 351651888 sectors (180046 MB) w/8192KiB Cache, CHS=21889/255/63, UDMA(100) hdc: host protected area => 1 hdc: 351651888 sectors (180046 MB) w/8192KiB Cache, CHS=21889/255/63, UDMA(100) hdg: host protected area => 1 hdg: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100) hdk: host protected area => 1 hdk: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(100) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 > hdg:<6> [PTBL] [9964/255/63] hdg1 hdk: hdk1 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 3 for device 00:10.3 IRQ routing conflict for 00:10.0, have irq 9, want irq 3 IRQ routing conflict for 00:10.1, have irq 9, want irq 3 IRQ routing conflict for 00:10.2, have irq 9, want irq 3 IRQ routing conflict for 00:10.3, have irq 9, want irq 3 hcd.c: ehci-hcd @ 00:10.3, VIA Technologies, Inc. USB 2.0 hcd.c: irq 9, pci mem f883c000 usb.c: new USB bus registered, assigned bus number 1 hcd/ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1.00, ehci-hcd 2002-Sep-23 hub.c: USB hub found hub.c: 6 ports detected usb-uhci.c: $Revision: 1.275 $ time 17:45:23 Dec 28 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 3 for device 00:10.0 IRQ routing conflict for 00:10.0, have irq 9, want irq 3 IRQ routing conflict for 00:10.1, have irq 9, want irq 3 IRQ routing conflict for 00:10.2, have irq 9, want irq 3 IRQ routing conflict for 00:10.3, have irq 9, want irq 3 usb-uhci.c: USB UHCI at I/O 0x8000, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 3 for device 00:10.1 IRQ routing conflict for 00:10.0, have irq 9, want irq 3 IRQ routing conflict for 00:10.1, have irq 9, want irq 3 IRQ routing conflict for 00:10.2, have irq 9, want irq 3 IRQ routing conflict for 00:10.3, have irq 9, want irq 3 usb-uhci.c: USB UHCI at I/O 0x7800, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 3 for device 00:10.2 IRQ routing conflict for 00:10.0, have irq 9, want irq 3 IRQ routing conflict for 00:10.1, have irq 9, want irq 3 IRQ routing conflict for 00:10.2, have irq 9, want irq 3 IRQ routing conflict for 00:10.3, have irq 9, want irq 3 usb-uhci.c: USB UHCI at I/O 0x7400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 3054.000 MB/sec 32regs : 2697.200 MB/sec pIII_sse : 2504.400 MB/sec pII_mmx : 4671.600 MB/sec p5_mmx : 5984.000 MB/sec raid5: using function: pIII_sse (2504.400 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) BlueZ HCI USB driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky usb.c: registered new driver hci_usb NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8192 buckets, 65536 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BlueZ L2CAP ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ SCO ver 0.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ BNEP ver 1.1 Copyright (C) 2001,2002 Inventel Systemes Written 2001,2002 by Clement Moreau Written 2001,2002 by David Libault Copyright (C) 2002 Maxim Krasnyanskiy reiserfs: checking transaction log (device 03:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 116k freed Adding Swap: 1028120k swap-space (priority 1) Adding Swap: 1028120k swap-space (priority 1) hub.c: new USB device 00:10.1-1, assigned address 2 hub.c: USB hub found hub.c: 5 ports detected i2c-core.o: i2c core module version 2.7.0 (20021208) i2c-viapro.o version 2.7.0 (20021208) i2c-viapro.o: Found Via VT8233A/8235 device i2c-viapro.o: Via Pro SMBus detected and initialized i2c-proc.o version 2.7.0 (20021208) w83781d.o version 2.7.0 (20021208) hub.c: new USB device 00:10.1-1.1, assigned address 3 [events: 00000054] [events: 00000054] md: autorun ... md: considering hdc6 ... md: adding hdc6 ... md: adding hda6 ... md: created md0 md: bind md: bind md: running: md: hdc6's event counter: 00000054 md: hda6's event counter: 00000054 md0: max total readahead window set to 496k md0: 2 data-disks, max readahead per data-disk: 248k raid0: looking at hda6 raid0: comparing hda6(94654848) with hda6(94654848) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hdc6 raid0: comparing hdc6(94654848) with hda6(94654848) raid0: EQUAL raid0: FINAL 1 zones raid0: zone 0 raid0: checking hda6 ... contained as device 0 (94654848) is smallest!. raid0: checking hdc6 ... contained as device 1 raid0: zone->nb_dev: 2, size: 189309696 raid0: current zone offset: 94654848 raid0: done. raid0 : md_size is 189309696 blocks. raid0 : conf->smallest->size is 189309696 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: updating md0 RAID superblock on device md: hdc6 [events: 00000055]<6>(write) hdc6's sb offset: 94654848 md: hda6 [events: 00000055]<6>(write) hda6's sb offset: 94654848 md: ... autorun DONE. [events: 00000023] [events: 00000023] md: autorun ... md: considering hdc7 ... md: adding hdc7 ... md: adding hda7 ... md: created md1 md: bind md: bind md: running: md: hdc7's event counter: 00000023 md: hda7's event counter: 00000023 md1: max total readahead window set to 248k md1: 1 data-disks, max readahead per data-disk: 248k raid5: device hdc7 operational as raid disk 1 raid5: device hda7 operational as raid disk 0 raid5: allocated 2241kB for md1 raid5: raid level 5 set md1 active with 2 out of 2 devices, algorithm 2 RAID5 conf printout: --- rd:2 wd:2 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda7 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdc7 RAID5 conf printout: --- rd:2 wd:2 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda7 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdc7 md: updating md1 RAID superblock on device md: hdc7 [events: 00000024]<6>(write) hdc7's sb offset: 80035712 md: hda7 [events: 00000024]<6>(write) hda7's sb offset: 80035712 md: ... autorun DONE. usb.c: USB device 3 (vend/prod 0x698/0x1786) is not claimed by any active driver. hub.c: new USB device 00:10.1-1.2, assigned address 4 input0: USB HID v1.00 Mouse [Cypress Sem. USB Mouse] on usb3:4.0 reiserfs: checking transaction log (device 09:00) ... Using r5 hash to sort names ReiserFS version 3.6.25 raid5: switching cache buffer size, 4096 --> 1024 raid5: switching cache buffer size, 1024 --> 4096 reiserfs: checking transaction log (device 09:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 Broadcom 4401 Ethernet Driver bcm4400 ver. 1.0.1 (08/26/02) PCI: Found IRQ 7 for device 00:09.0 PCI: Sharing IRQ 7 with 00:0f.0 eth0: Broadcom BCM4401 100Base-T found at mem e3000000, IRQ 7, node addr 00e018b976f7 NETDEV WATCHDOG: eth0: transmit timed out bcm4400: eth0 NIC Link is Up, 100 Mbps full duplex lirc_serial: auto-detected active low receiver PCI: Found IRQ 4 for device 00:11.5 IRQ routing conflict for 00:11.5, have irq 9, want irq 4 PCI: Setting latency timer of device 00:11.5 to 64 i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208) PCI: Found IRQ 11 for device 00:0a.0 PCI: Sharing IRQ 11 with 01:00.0 em8300: EM8300 8300 (rev 1) bus: 0, devfn: 80, irq: 11, memory: 0xe2800000. em8300: mapped-memory at 0xf8c17000 em8300: using MTRR em8300: 1 EM8300 card(s) found. em8300_main.o: Chip revision: 1 adv717x.o: ADV7175A chip detected adv717x.o: Configuring for PAL 60 adv717x.o: Configuring for PAL em8300_audio.o: Analog audio enabled em8300: Microcode version 0x29 loaded em8300_audio.o: Digital PCM audio enabled nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2960 Tue May 14 07:41:42 PDT 2002 NVRM: AGPGART: unknown chipset NVRM: AGPGART: aperture: 128M @ 0xf0000000 NVRM: AGPGART: aperture mapped from 0xf0000000 to 0xf9e28000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages Linux video capture interface: v1.00 bttv: driver version 0.7.96 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge bttv: Bt8xx card found (0). PCI: Found IRQ 9 for device 00:0b.0 bttv0: Bt848 (rev 18) at 00:0b.0, irq: 9, latency: 32, mmio: 0xe6800000 bttv0: using: BT848A(Hauppauge (bt848)) [card=2,insmod option] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom: model=60134, tuner=Philips FM1216 (5), radio=yes bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3410D-B4, has NICAM support msp3410: daemon started bttv0: i2c attach [client=MSP3410D-B4,ok] bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) tuner: ignoring SMBus Via Pro adapter at e800 i2c adapter [id=0x40002] tuner: ignoring EM8300 I2C bus 1 i2c adapter [id=0x1000a] tuner: ignoring EM8300 I2C bus 2 i2c adapter [id=0x1000a] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv0: i2c attach [client=Philips PAL_BG (FI1216 and compa,ok] bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 --=-wqy7rk0x1tG+l0mCe8qu Content-Disposition: attachment; filename=hdparm Content-Type: application/octet-stream; name=hdparm Content-Transfer-Encoding: quoted-printable /dev/hda: ATA device, with non-removable media Model Number: WDC WD1800JB-00DUA0 =20 Serial Number: WD-WMACK1092221=00 Firmware Revision: 63.13F63 Standards: Supported: 6 5 4 3=20 Likely used: 6 Configuration: Logical max current cylinders 16383 65535 heads 16 1 sectors/track 63 63 -- CHS current addressable sectors: 4128705 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 351651888 device size with M =3D 1024*1024: 171705 MBytes device size with M =3D 1000*1000: 180045 MBytes (180 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 98 Queue depth: 1 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max =3D 16 Current =3D 0 Recommended acoustic management value: 128, current value: 128 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5=20 Cycle time: min=3D120ns recommended=3D120ns PIO: pio0 pio1 pio2 pio3 pio4=20 Cycle time: no flow control=3D120ns IORDY flow control=3D120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command=20 * Device Configuration Overlay feature set=20 * 48-bit Address feature set=20 * Automatic Acoustic Management feature set=20 SET MAX security extension * DOWNLOAD MICROCODE cmd * SMART self-test=20 * SMART error logging=20 Security:=20 supported not enabled not locked not frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num =3D 0 determined by the jumper Checksum: correct --=-wqy7rk0x1tG+l0mCe8qu-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/