Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 1 Jan 2003 10:51:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 1 Jan 2003 10:51:39 -0500 Received: from rrcs-midsouth-24-172-39-28.biz.rr.com ([24.172.39.28]:38674 "EHLO maunzelectronics.com") by vger.kernel.org with ESMTP id ; Wed, 1 Jan 2003 10:51:36 -0500 Message-ID: <3E13107E.3D579F3@justirc.net> Date: Wed, 01 Jan 2003 10:59:58 -0500 From: Mark Rutherford X-Mailer: Mozilla 4.8 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: Soeren Sonnenburg CC: "linux-kernel@vger.kernel.org" Subject: Re: ide harddisk freeze WDC WD1800JB vs VIA VT8235 References: <1041435181.983.76.camel@sun> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2736 Lines: 81 Q: are you using cables with a slave connector, but its not in use? I had this problem, with this chipset and it turned out that it didnt like having a long 80 wire cable with a loose connector I got a round cable with just 2 connectors, 1 for the board and 1 for the drive.... never locked again. I thought it to be strange as well. but with my setup it happened more frequently, say once every 2-3 hours. hope this is of any help. Soeren Sonnenburg wrote: > Hi. > > I still get harddisk freezes on 2 WD1800JB drives (asus A7V8X mobo), > i.e., I have to powercycle the system to get the harddisk back working. > A cold reset is not enough. > > The harddisks are connected to the primary and secondary via vt8235 > controller (both disks are master). > > When a harddisk 'freezes' the ide-light is continuosly on. When that > happens the machine is still ping-able but since these two disk form a > software raid0 the machine hangs on disk access. > > This problem happens like once in a week....and very seldom within 3 > days. > > The system is athlon xp 2.4G+ a7v8x mainboard 1.5g ddr333 memory kernel > 2.4.21-pre2 (did not work with 2.4.20 that is why I went to the pre > version) > > So far I have ruled out the following: > - it is not a cable problem (tested several cables) > - the memory of the machine seems to be ok (memtest ran for 2 days > without reporting an error) > - it is not a problem of the power supply (tested another powersupply) > - the harddisk are ok ( I ran the vendors check program ) > > Now it could be that the via vt8235 chipset has a bug, the linux ide > handling code is buggy or the firmware of the drive is not ok. > > It is probably a vt8235 problem or linux driver problem since a I know > of 8 wdc1800jb disks with that firmware version running since >1month in > a hardware raid setup without problems. > > I attached the kernel config, dmesg, and hdparm -I of one of the drives. > > If you have any ideas/ need further infos don't hesitate to contact me. > > Thanks in advance, > Soeren. > > ------------------------------------------------------------------------ > Name: config > config Type: Plain Text (text/plain) > Encoding: 7bit > > Name: dmesg > dmesg Type: Plain Text (text/plain) > Encoding: 7bit > > Name: hdparm > hdparm Type: unspecified type (application/octet-stream) > Encoding: quoted-printable -- Regards, Mark Rutherford mark@justirc.net - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/