Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751245AbaLPKRt (ORCPT ); Tue, 16 Dec 2014 05:17:49 -0500 Received: from mailout3.w1.samsung.com ([210.118.77.13]:53553 "EHLO mailout3.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751133AbaLPKRn (ORCPT ); Tue, 16 Dec 2014 05:17:43 -0500 X-AuditID: cbfec7f5-b7fc86d0000066b7-44-549006c422dd Message-id: <549006C2.4070505@samsung.com> Date: Tue, 16 Dec 2014 11:17:38 +0100 From: Karol Wrona User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 MIME-version: 1.0 To: Jonathan Cameron , linux-iio@vger.kernel.org, Hartmut Knaack , linux-kernel@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , Kyungmin Park , Karol Wrona Subject: Re: [PATCH v3 1/5] iio: common: ssp_sensors: Add sensorhub driver References: <1417809290-9662-1-git-send-email-k.wrona@samsung.com> <1417809290-9662-2-git-send-email-k.wrona@samsung.com> <54830E09.2040102@kernel.org> In-reply-to: <54830E09.2040102@kernel.org> Content-type: text/plain; charset=windows-1252 Content-transfer-encoding: 7bit X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFjrALMWRmVeSWpSXmKPExsVy+t/xy7pH2CaEGBzeIGaxccZ6VosHTauY LHb9f8NscbbpDbvFvCPvWCwu75rDZrFn3RYmB3aPnbPusnt8+BjnsWlVJ5tH35ZVjB6fN8kF sEZx2aSk5mSWpRbp2yVwZXzbOIG14O4Z5oqpv68yNzCe+cDUxcjJISFgInG4dTsLhC0mceHe erYuRi4OIYGljBIfv9xkgXA+MUpMWtsNVsUroCVx+EMjO4jNIqAqMeF3F5jNJqAu0bxjMTOI LSoQIXFlzRxGiHpBiR+T74ENEhFoYZR48XMXK4jDLNDOKHF/03mwbmEBL4kHM6awQ6ybzShx 8fxsNpAEJ9C6u+sagI7lAOrQk7h/UQskzCwgL7F5zVvmCYwCs5AsmYVQNQtJ1QJG5lWMoqml yQXFSem5RnrFibnFpXnpesn5uZsYIaH+dQfj0mNWhxgFOBiVeHgFWvpDhFgTy4orcw8xSnAw K4nwbrkPFOJNSaysSi3Kjy8qzUktPsTIxMEp1cConcB262zQoiDtmTxT0s8rpe+aMEM6aGLj ywl6uwobLbYwKjbOXFp0cGcX49I/P8MFX6Q2yCQ8mbCz973VlW2b7Z6rrmDevGNl9qQTDGUH T8/b+9pBdQWPlvgel8PLm1JCBf5INmTnuv7ZrftAV1/22X+hpEjz2ogfFw0CP+3KD+U3ueqZ PP+QEktxRqKhFnNRcSIArpZ6/1MCAAA= Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 12/06/2014 03:09 PM, Jonathan Cameron wrote: > On 05/12/14 19:54, Karol Wrona wrote: >> Sensorhub is MCU dedicated to collect data and manage several sensors. >> Sensorhub is a spi device which provides a layer for IIO devices. It provides >> some data parsing and common mechanism for sensorhub sensors. >> >> Adds common sensorhub library for sensorhub driver and iio drivers >> which uses sensorhub MCU to communicate with sensors. >> >> Change-Id: I4f066e9f3f477d4f6faabd4507be98e32f79e344 >> Signed-off-by: Karol Wrona >> Acked-by: Kyungmin Park > Nice bit of code. A few comments inline, mostly slight preferences rather > than anything else. I wonder if it's worth centralising some of the buffers > to cut down on the large number of little allocations. I have some questions (inline). > > >> --- >> drivers/iio/common/Kconfig | 1 + >> drivers/iio/common/Makefile | 1 + >> drivers/iio/common/ssp_sensors/Kconfig | 24 ++ >> drivers/iio/common/ssp_sensors/Makefile | 6 + >> drivers/iio/common/ssp_sensors/ssp.h | 254 +++++++++++ >> drivers/iio/common/ssp_sensors/ssp_dev.c | 693 ++++++++++++++++++++++++++++++ >> drivers/iio/common/ssp_sensors/ssp_spi.c | 644 +++++++++++++++++++++++++++ >> include/linux/iio/common/ssp_sensors.h | 80 ++++ >> 8 files changed, 1703 insertions(+) >> create mode 100644 drivers/iio/common/ssp_sensors/Kconfig >> create mode 100644 drivers/iio/common/ssp_sensors/Makefile >> create mode 100644 drivers/iio/common/ssp_sensors/ssp.h >> create mode 100644 drivers/iio/common/ssp_sensors/ssp_dev.c >> create mode 100644 drivers/iio/common/ssp_sensors/ssp_spi.c >> create mode 100644 include/linux/iio/common/ssp_sensors.h >> >> diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig >> index 0b6e97d..790f106 100644 >> --- a/drivers/iio/common/Kconfig >> +++ b/drivers/iio/common/Kconfig >> @@ -3,4 +3,5 @@ >> # >> >> source "drivers/iio/common/hid-sensors/Kconfig" >> +source "drivers/iio/common/ssp_sensors/Kconfig" >> source "drivers/iio/common/st_sensors/Kconfig" >> diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile >> index 3112df0..b1e4d9c 100644 >> --- a/drivers/iio/common/Makefile >> +++ b/drivers/iio/common/Makefile >> @@ -8,4 +8,5 @@ >> >> # When adding new entries keep the list in alphabetical order >> obj-y += hid-sensors/ >> +obj-y += ssp_sensors/ >> obj-y += st_sensors/ >> diff --git a/drivers/iio/common/ssp_sensors/Kconfig b/drivers/iio/common/ssp_sensors/Kconfig >> new file mode 100644 >> index 0000000..c1d054e >> --- /dev/null >> +++ b/drivers/iio/common/ssp_sensors/Kconfig >> @@ -0,0 +1,24 @@ >> +# >> +# SSP sensor drivers and commons configuration >> +# >> +menu "SSP Sensor Common" >> + >> +config IIO_SSP_SENSOR >> + tristate "Commons for all SSP Sensor IIO drivers" >> + depends on SSP_SENSORS >> + select IIO_BUFFER >> + select IIO_KFIFO_BUF >> + help >> + Say yes here to build commons for SSP sensors. >> + >> +config SSP_SENSORS >> + tristate "Samsung Sensorhub driver" >> + depends on SPI >> + help >> + SSP driver for sensorhub. >> + If you say yes here you get ssp support for >> + sensorhub. >> + To compile this driver as a module, choose M here: the >> + module will be called sensorhub. >> + >> +endmenu >> diff --git a/drivers/iio/common/ssp_sensors/Makefile b/drivers/iio/common/ssp_sensors/Makefile >> new file mode 100644 >> index 0000000..7aede30 >> --- /dev/null >> +++ b/drivers/iio/common/ssp_sensors/Makefile >> @@ -0,0 +1,6 @@ >> +# >> +# Makefile for SSP sensor drivers and commons. >> +# >> + >> +obj-$(CONFIG_IIO_SSP_SENSOR) += ssp_iio.o >> +obj-$(CONFIG_SSP_SENSORS) += ssp_dev.o ssp_spi.o >> diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h >> new file mode 100644 >> index 0000000..b2fbc82 >> --- /dev/null >> +++ b/drivers/iio/common/ssp_sensors/ssp.h >> @@ -0,0 +1,254 @@ >> +/* >> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> +#ifndef __SSP_SENSORHUB_H__ >> +#define __SSP_SENSORHUB_H__ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#define SSP_DEVICE_ID 0x55 >> + >> +#ifdef SSP_DBG >> +#define ssp_dbg(format, ...) pr_info("[SSP] "format, ##__VA_ARGS__) >> +#else >> +#define ssp_dbg(format, ...) >> +#endif >> + >> +#define SSP_SW_RESET_TIME 3000 >> +/* Sensor polling in ms */ >> +#define SSP_DEFAULT_POLLING_DELAY 200 >> +#define SSP_DEFAULT_RETRIES 3 >> +#define SSP_DATA_PACKET_SIZE 960 >> + >> +enum { >> + SSP_KERNEL_BINARY = 0, >> + SSP_KERNEL_CRASHED_BINARY, >> +}; >> + >> +enum { >> + SSP_INITIALIZATION_STATE = 0, >> + SSP_NO_SENSOR_STATE, >> + SSP_ADD_SENSOR_STATE, >> + SSP_RUNNING_SENSOR_STATE, >> +}; >> + >> +/* Firmware download STATE */ >> +enum { >> + SSP_FW_DL_STATE_FAIL = -1, >> + SSP_FW_DL_STATE_NONE = 0, >> + SSP_FW_DL_STATE_NEED_TO_SCHEDULE, >> + SSP_FW_DL_STATE_SCHEDULED, >> + SSP_FW_DL_STATE_DOWNLOADING, >> + SSP_FW_DL_STATE_SYNC, >> + SSP_FW_DL_STATE_DONE, >> +}; >> + >> +#define SSP_INVALID_REVISION 99999 >> +#define SSP_INVALID_REVISION2 0xffffff >> + >> +/* AP -> SSP Instruction */ >> +#define SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD 0xa1 >> +#define SSP_MSG2SSP_INST_BYPASS_SENSOR_RM 0xa2 >> +#define SSP_MSG2SSP_INST_REMOVE_ALL 0xa3 >> +#define SSP_MSG2SSP_INST_CHANGE_DELAY 0xa4 >> +#define SSP_MSG2SSP_INST_LIBRARY_ADD 0xb1 >> +#define SSP_MSG2SSP_INST_LIBRARY_REMOVE 0xb2 >> +#define SSP_MSG2SSP_INST_LIB_NOTI 0xb4 >> +#define SSP_MSG2SSP_INST_LIB_DATA 0xc1 >> + >> +#define SSP_MSG2SSP_AP_MCU_SET_GYRO_CAL 0xcd >> +#define SSP_MSG2SSP_AP_MCU_SET_ACCEL_CAL 0xce >> +#define SSP_MSG2SSP_AP_STATUS_SHUTDOWN 0xd0 >> +#define SSP_MSG2SSP_AP_STATUS_WAKEUP 0xd1 >> +#define SSP_MSG2SSP_AP_STATUS_SLEEP 0xd2 >> +#define SSP_MSG2SSP_AP_STATUS_RESUME 0xd3 >> +#define SSP_MSG2SSP_AP_STATUS_SUSPEND 0xd4 >> +#define SSP_MSG2SSP_AP_STATUS_RESET 0xd5 >> +#define SSP_MSG2SSP_AP_STATUS_POW_CONNECTED 0xd6 >> +#define SSP_MSG2SSP_AP_STATUS_POW_DISCONNECTED 0xd7 >> +#define SSP_MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE 0xda >> +#define SSP_MSG2SSP_AP_MCU_SET_DUMPMODE 0xdb >> +#define SSP_MSG2SSP_AP_MCU_DUMP_CHECK 0xdc >> +#define SSP_MSG2SSP_AP_MCU_BATCH_FLUSH 0xdd >> +#define SSP_MSG2SSP_AP_MCU_BATCH_COUNT 0xdf >> + >> +#define SSP_MSG2SSP_AP_WHOAMI 0x0f >> +#define SSP_MSG2SSP_AP_FIRMWARE_REV 0xf0 >> +#define SSP_MSG2SSP_AP_SENSOR_FORMATION 0xf1 >> +#define SSP_MSG2SSP_AP_SENSOR_PROXTHRESHOLD 0xf2 >> +#define SSP_MSG2SSP_AP_SENSOR_BARCODE_EMUL 0xf3 >> +#define SSP_MSG2SSP_AP_SENSOR_SCANNING 0xf4 >> +#define SSP_MSG2SSP_AP_SET_MAGNETIC_HWOFFSET 0xf5 >> +#define SSP_MSG2SSP_AP_GET_MAGNETIC_HWOFFSET 0xf6 >> +#define SSP_MSG2SSP_AP_SENSOR_GESTURE_CURRENT 0xf7 >> +#define SSP_MSG2SSP_AP_GET_THERM 0xf8 >> +#define SSP_MSG2SSP_AP_GET_BIG_DATA 0xf9 >> +#define SSP_MSG2SSP_AP_SET_BIG_DATA 0xfa >> +#define SSP_MSG2SSP_AP_START_BIG_DATA 0xfb >> +#define SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX 0xfd >> +#define SSP_MSG2SSP_AP_SENSOR_TILT 0xea >> +#define SSP_MSG2SSP_AP_MCU_SET_TIME 0xfe >> +#define SSP_MSG2SSP_AP_MCU_GET_TIME 0xff >> + >> +#define SSP_MSG2SSP_AP_FUSEROM 0x01 >> + >> +/* voice data */ >> +#define SSP_TYPE_WAKE_UP_VOICE_SERVICE 0x01 >> +#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_AM 0x01 >> +#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_GRAMMER 0x02 >> + >> +/* Factory Test */ >> +#define SSP_ACCELEROMETER_FACTORY 0x80 >> +#define SSP_GYROSCOPE_FACTORY 0x81 >> +#define SSP_GEOMAGNETIC_FACTORY 0x82 >> +#define SSP_PRESSURE_FACTORY 0x85 >> +#define SSP_GESTURE_FACTORY 0x86 >> +#define SSP_TEMPHUMIDITY_CRC_FACTORY 0x88 >> +#define SSP_GYROSCOPE_TEMP_FACTORY 0x8a >> +#define SSP_GYROSCOPE_DPS_FACTORY 0x8b >> +#define SSP_MCU_FACTORY 0x8c >> +#define SSP_MCU_SLEEP_FACTORY 0x8d >> + >> +/* SSP -> AP ACK about write CMD */ >> +#define SSP_MSG_ACK 0x80 /* ACK from SSP to AP */ >> +#define SSP_MSG_NAK 0x70 /* NAK from SSP to AP */ >> + >> +struct ssp_sensorhub_info { >> + char *fw_name; >> + char *fw_crashed_name; >> + unsigned int fw_rev; >> + const u8 * const mag_table; >> + const unsigned int mag_length; >> +}; >> + >> +/* ssp_msg options bit */ >> +#define SSP_RW 0 >> +#define SSP_INDEX 3 >> + >> +#define SSP_AP2HUB_READ 0 >> +#define SSP_AP2HUB_WRITE 1 >> +#define SSP_HUB2AP_WRITE 2 >> +#define SSP_AP2HUB_READY 3 >> +#define SSP_AP2HUB_RETURN 4 >> + >> +/** >> + * struct ssp_data - ssp platformdata structure >> + * @spi: spi device >> + * @sensorhub_info: info about sensorhub board specific features >> + * @wdt_timer: watchdog timer >> + * @work_wdt: watchdog work >> + * @work_firmware: firmware upgrade work queue >> + * @work_refresh: refresh work queue for reset request from MCU >> + * @shut_down: shut down flag >> + * @mcu_dump_mode: mcu dump mode for debug >> + * @time_syncing: time syncing indication flag >> + * @timestamp: previous time in ns calculated for time syncing >> + * @check_status: status table for each sensor >> + * @com_fail_cnt: communication fail count >> + * @reset_cnt: reset count >> + * @timeout_cnt: timeout count >> + * @available_sensors: available sensors seen by sensorhub (bit array) >> + * @cur_firm_rev: cached current firmware revision >> + * @last_resume_state: last AP resume/suspend state used to handle the PM >> + * state of ssp >> + * @last_ap_state: (obsolete) sleep notification for MCU >> + * @sensor_enable: sensor enable mask >> + * @delay_buf: data acquisition intervals table >> + * @batch_latency_buf: yet unknown but existing in communication protocol >> + * @batch_opt_buf: yet unknown but existing in communication protocol >> + * @accel_position: yet unknown but existing in communication protocol >> + * @mag_position: yet unknown but existing in communication protocol >> + * @fw_dl_state: firmware download state >> + * @comm_lock: lock protecting the handshake >> + * @pending_lock: lock protecting pending list and completion >> + * @mcu_reset: mcu reset line >> + * @ap_mcu_gpio: ap to mcu gpio line >> + * @mcu_ap_gpio: mcu to ap gpio line >> + * @pending_list: pending list for messages queued to be sent/read >> + * @sensor_devs: registered IIO devices table >> + * @enable_refcount: enable reference count for wdt (watchdog timer) > Good docs. Thanks. >> + */ >> +struct ssp_data { >> + struct spi_device *spi; >> + struct ssp_sensorhub_info *sensorhub_info; >> + struct timer_list wdt_timer; >> + struct work_struct work_wdt; >> + struct delayed_work work_refresh; >> + >> + bool shut_down; >> + bool mcu_dump_mode; >> + bool time_syncing; >> + int64_t timestamp; >> + >> + int check_status[SSP_SENSOR_MAX]; >> + >> + unsigned int com_fail_cnt; >> + unsigned int reset_cnt; >> + unsigned int timeout_cnt; >> + >> + unsigned int available_sensors; >> + unsigned int cur_firm_rev; >> + >> + char last_resume_state; >> + char last_ap_state; >> + >> + unsigned int sensor_enable; >> + u32 delay_buf[SSP_SENSOR_MAX]; >> + s32 batch_latency_buf[SSP_SENSOR_MAX]; >> + s8 batch_opt_buf[SSP_SENSOR_MAX]; >> + >> + int accel_position; >> + int mag_position; >> + int fw_dl_state; >> + >> + struct mutex comm_lock; >> + struct mutex pending_lock; >> + >> + int mcu_reset; >> + int ap_mcu_gpio; >> + int mcu_ap_gpio; >> + >> + struct list_head pending_list; >> + >> + struct iio_dev *sensor_devs[SSP_SENSOR_MAX]; >> + atomic_t enable_refcount; >> +}; >> + >> +void ssp_clean_pending_list(struct ssp_data *data); >> + >> +int ssp_command(struct ssp_data *data, char command, int arg); >> + >> +int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type, >> + u8 *send_buf, u8 length); >> + >> +int ssp_irq_msg(struct ssp_data *data); >> + >> +int ssp_get_chipid(struct ssp_data *data); >> + >> +int ssp_set_sensor_position(struct ssp_data *data); >> + >> +int ssp_set_magnetic_matrix(struct ssp_data *data); >> + >> +unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data); >> + >> +unsigned int ssp_get_firmware_rev(struct ssp_data *data); >> + >> +int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay); >> + >> +#endif /* __SSP_SENSORHUB_H__ */ >> diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c >> new file mode 100644 >> index 0000000..5e43ff3 >> --- /dev/null >> +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c >> @@ -0,0 +1,693 @@ >> +/* >> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include "ssp.h" >> + >> +#define SSP_WDT_TIME 10000 >> +#define SSP_LIMIT_RESET_CNT 20 >> +#define SSP_LIMIT_TIMEOUT_CNT 3 >> + >> +/* It is possible that it is max clk rate for version 1.0 of bootcode */ >> +#define SSP_BOOT_SPI_HZ 400000 >> + >> +static const u8 ssp_magnitude_table[] = {110, 85, 171, 71, 203, 195, 0, 67, 208, >> + 56, 175, 244, 206, 213, 0, 92, 250, 0, 55, 48, 189, 252, 171, 243, 13, >> + 45, 250}; >> + >> +static const struct ssp_sensorhub_info ssp_rinato_info = { >> + .fw_name = "ssp_B2.fw", >> + .fw_crashed_name = "ssp_crashed.fw", >> + .fw_rev = 14052300, >> + .mag_table = ssp_magnitude_table, >> + .mag_length = ARRAY_SIZE(ssp_magnitude_table), >> +}; >> + >> +static const struct ssp_sensorhub_info ssp_thermostat_info = { >> + .fw_name = "thermostat_B2.fw", >> + .fw_crashed_name = "ssp_crashed.fw", >> + .fw_rev = 14080600, >> + .mag_table = ssp_magnitude_table, >> + .mag_length = ARRAY_SIZE(ssp_magnitude_table), >> +}; >> + >> +static void ssp_toggle_mcu_reset(struct ssp_data *data) >> +{ >> + gpio_set_value(data->mcu_reset, 0); >> + usleep_range(1000, 1200); >> + gpio_set_value(data->mcu_reset, 1); >> + msleep(50); >> +} >> + >> +static void ssp_sync_available_sensors(struct ssp_data *data) >> +{ >> + int i, ret; >> + >> + for (i = 0; i < SSP_SENSOR_MAX; ++i) { >> + if (data->available_sensors & BIT(i)) { >> + ret = ssp_enable_sensor(data, i, data->delay_buf[i]); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, "Sync sensor nr: %d fail\n", >> + i); >> + continue; >> + } >> + } >> + } >> + >> + ret = ssp_command(data, SSP_MSG2SSP_AP_MCU_SET_DUMPMODE, >> + data->mcu_dump_mode); >> + if (ret < 0) >> + dev_err(&data->spi->dev, "SSP_MSG2SSP_AP_MCU_SET_DUMPMODE failed\n"); >> +} >> + >> +static void ssp_enable_mcu(struct ssp_data *data, bool enable) >> +{ >> + dev_info(&data->spi->dev, "current shutdown = %d, old = %d\n", enable, >> + data->shut_down); >> + >> + if (enable && data->shut_down) { >> + data->shut_down = false; >> + enable_irq(data->spi->irq); >> + enable_irq_wake(data->spi->irq); >> + } else if (!enable && !data->shut_down) { >> + data->shut_down = true; >> + disable_irq(data->spi->irq); >> + disable_irq_wake(data->spi->irq); >> + } else { >> + dev_warn(&data->spi->dev, "current shutdown = %d, old = %d\n", >> + enable, data->shut_down); >> + } >> +} >> + >> +/* >> + * This function is the first one which communicates with the mcu so it is >> + * possible that the first attempt will fail >> + */ >> +static int ssp_check_fwbl(struct ssp_data *data) >> +{ >> + int retries = 0; >> + >> + while (retries++ < 5) { >> + data->cur_firm_rev = ssp_get_firmware_rev(data); >> + if (data->cur_firm_rev == SSP_INVALID_REVISION || >> + data->cur_firm_rev == SSP_INVALID_REVISION2) { >> + dev_warn(&data->spi->dev, >> + "Invalid revision, trying %d time\n", retries); >> + } else { >> + break; >> + } >> + } >> + >> + if (data->cur_firm_rev == SSP_INVALID_REVISION || >> + data->cur_firm_rev == SSP_INVALID_REVISION2) { >> + dev_err(&data->spi->dev, "SSP_INVALID_REVISION\n"); >> + return SSP_FW_DL_STATE_NEED_TO_SCHEDULE; >> + } >> + >> + dev_info(&data->spi->dev, >> + "MCU Firm Rev : Old = %8u, New = %8u\n", >> + data->cur_firm_rev, >> + data->sensorhub_info->fw_rev); >> + >> + if (data->cur_firm_rev != data->sensorhub_info->fw_rev) >> + return SSP_FW_DL_STATE_NEED_TO_SCHEDULE; >> + >> + return SSP_FW_DL_STATE_NONE; >> +} >> + >> +static void ssp_reset_mcu(struct ssp_data *data) >> +{ >> + ssp_enable_mcu(data, false); >> + ssp_clean_pending_list(data); >> + ssp_toggle_mcu_reset(data); >> + ssp_enable_mcu(data, true); >> +} >> + >> +static void ssp_wdt_work_func(struct work_struct *work) >> +{ >> + struct ssp_data *data = container_of(work, struct ssp_data, work_wdt); >> + >> + dev_err(&data->spi->dev, "%s - Sensor state: 0x%x, RC: %u, CC: %u\n", >> + __func__, data->available_sensors, data->reset_cnt, >> + data->com_fail_cnt); >> + >> + ssp_reset_mcu(data); >> + data->com_fail_cnt = 0; >> + data->timeout_cnt = 0; >> +} >> + >> +static void ssp_wdt_timer_func(unsigned long ptr) >> +{ >> + struct ssp_data *data = (struct ssp_data *)ptr; >> + >> + switch (data->fw_dl_state) { >> + case SSP_FW_DL_STATE_FAIL: >> + case SSP_FW_DL_STATE_DOWNLOADING: >> + case SSP_FW_DL_STATE_SYNC: >> + goto _mod; >> + } >> + >> + if (data->timeout_cnt > SSP_LIMIT_TIMEOUT_CNT || >> + data->com_fail_cnt > SSP_LIMIT_RESET_CNT) >> + queue_work(system_power_efficient_wq, &data->work_wdt); >> +_mod: >> + mod_timer(&data->wdt_timer, jiffies + msecs_to_jiffies(SSP_WDT_TIME)); >> +} >> + >> +static void ssp_enable_wdt_timer(struct ssp_data *data) >> +{ >> + mod_timer(&data->wdt_timer, jiffies + msecs_to_jiffies(SSP_WDT_TIME)); >> +} >> + >> +static void ssp_disable_wdt_timer(struct ssp_data *data) >> +{ >> + del_timer_sync(&data->wdt_timer); >> + cancel_work_sync(&data->work_wdt); >> +} >> + >> +/** >> + * ssp_get_sensor_delay() - gets sensor data acquisition period >> + * @data: sensorhub structure >> + * @type: SSP sensor type >> + * >> + * Returns acquisition period in ms >> + */ >> +u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type type) >> +{ >> + return data->delay_buf[type]; >> +} >> +EXPORT_SYMBOL(ssp_get_sensor_delay); >> + >> +/** >> + * ssp_enable_sensor() - enables data acquisition for sensor >> + * @data: sensorhub structure >> + * @type: SSP sensor type >> + * @delay: delay in ms >> + * >> + * Returns 0 or negative value in case of error >> + */ >> +int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type, >> + u32 delay) >> +{ >> + int ret; >> + struct { >> + __le32 a; >> + __le32 b; >> + u8 c; >> + } __attribute__((__packed__)) to_send; >> + >> + to_send.a = cpu_to_le32(delay); >> + to_send.b = cpu_to_le32(data->batch_latency_buf[type]); >> + to_send.c = data->batch_opt_buf[type]; >> + >> + switch (data->check_status[type]) { >> + case SSP_INITIALIZATION_STATE: >> + /* do calibration step, now just enable */ >> + case SSP_ADD_SENSOR_STATE: >> + ret = ssp_send_instruction(data, >> + SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD, >> + type, >> + (u8 *)&to_send, sizeof(to_send)); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, "Enabling sensor failed\n"); >> + data->check_status[type] = SSP_NO_SENSOR_STATE; >> + goto derror; >> + } >> + >> + data->sensor_enable |= BIT(type); >> + data->check_status[type] = SSP_RUNNING_SENSOR_STATE; >> + break; >> + case SSP_RUNNING_SENSOR_STATE: >> + ret = ssp_send_instruction(data, >> + SSP_MSG2SSP_INST_CHANGE_DELAY, type, >> + (u8 *)&to_send, sizeof(to_send)); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, >> + "Changing sensor delay failed\n"); >> + goto derror; >> + } >> + break; >> + default: >> + data->check_status[type] = SSP_ADD_SENSOR_STATE; >> + break; >> + } >> + >> + data->delay_buf[type] = delay; >> + >> + if (atomic_inc_return(&data->enable_refcount) == 1) >> + ssp_enable_wdt_timer(data); >> + >> + return 0; >> + >> +derror: >> + return ret; >> +} >> +EXPORT_SYMBOL(ssp_enable_sensor); >> + >> +/** >> + * ssp_change_delay() - changes data acquisition for sensor >> + * @data: sensorhub structure >> + * @type: SSP sensor type >> + * @delay: delay in ms >> + * >> + * Returns 0 or negative value in case of error >> + */ >> +int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type, >> + u32 delay) >> +{ >> + int ret; >> + struct { >> + __le32 a; >> + __le32 b; >> + u8 c; >> + } __attribute__((__packed__)) to_send; > This structure gets used in a couple of places. Worth giving it > a type and pulling it out of the functions? >> + >> + to_send.a = cpu_to_le32(delay); >> + to_send.b = cpu_to_le32(data->batch_latency_buf[type]); >> + to_send.c = data->batch_opt_buf[type]; >> + >> + ret = ssp_send_instruction(data, SSP_MSG2SSP_INST_CHANGE_DELAY, type, >> + (u8 *)&to_send, sizeof(to_send)); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, "Changing delay sensor failed\n"); >> + return ret; >> + } >> + >> + data->delay_buf[type] = delay; >> + >> + return 0; >> +} >> +EXPORT_SYMBOL(ssp_change_delay); >> + >> +/** >> + * ssp_disable_sensor() - disables sensor >> + * >> + * @data: sensorhub structure >> + * @type: SSP sensor type >> + * >> + * Returns 0 or negative value in case of error > Nice docs. Though why this rather obvious one gets docs and the less > obvious ones don't is an interesting question... Just because they are exported. >> + */ >> +int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type) >> +{ >> + int ret; >> + __le32 command; >> + >> + if (data->sensor_enable & BIT(type)) { >> + command = cpu_to_le32(data->delay_buf[type]); >> + >> + ret = ssp_send_instruction(data, >> + SSP_MSG2SSP_INST_BYPASS_SENSOR_RM, >> + type, (u8 *)&command, >> + sizeof(command)); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, "Remove sensor fail\n"); >> + return ret; >> + } >> + >> + data->sensor_enable &= ~BIT(type); >> + } >> + >> + data->check_status[type] = SSP_ADD_SENSOR_STATE; >> + >> + if (atomic_dec_and_test(&data->enable_refcount)) >> + ssp_disable_wdt_timer(data); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL(ssp_disable_sensor); >> + >> +static irqreturn_t sensordata_irq_thread_fn(int irq, void *dev_id) >> +{ >> + struct ssp_data *data = dev_id; >> + >> + ssp_irq_msg(data); > Why have this trivial wrapper instead of just having the code here? > Might make sense but please explain. I wanted to preserve error path for ssp_irq_msg and keep it in spi file. >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int ssp_initialize_mcu(struct ssp_data *data) >> +{ >> + int ret; >> + >> + ssp_clean_pending_list(data); >> + >> + ret = ssp_get_chipid(data); >> + if (ret != SSP_DEVICE_ID) { >> + dev_err(&data->spi->dev, "%s - MCU %s ret = %d\n", __func__, >> + ret < 0 ? "is not working" : "identification failed", >> + ret); >> + return ret < 0 ? ret : -ENODEV; >> + } >> + >> + dev_info(&data->spi->dev, "MCU device ID = %d\n", ret); >> + >> + ret = ssp_set_sensor_position(data); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, "ssp_set_sensor_position failed\n"); >> + return ret; >> + } >> + >> + ret = ssp_set_magnetic_matrix(data); > Hmm. It feels like this might belong more in the iio driver than here. > Please justify. >> + if (ret < 0) { >> + dev_err(&data->spi->dev, >> + "%s - ssp_set_magnetic_matrix failed\n", __func__); >> + return ret; >> + } >> + >> + data->available_sensors = ssp_get_sensor_scanning_info(data); >> + if (data->available_sensors == 0) { >> + dev_err(&data->spi->dev, >> + "%s - ssp_get_sensor_scanning_info failed\n", __func__); >> + return -EIO; >> + } >> + >> + data->cur_firm_rev = ssp_get_firmware_rev(data); >> + dev_info(&data->spi->dev, "MCU Firm Rev : New = %8u\n", >> + data->cur_firm_rev); >> + >> + return ssp_command(data, SSP_MSG2SSP_AP_MCU_DUMP_CHECK, 0); >> +} >> + > What's this doing? Perhaps a bit of documentation to explain why a > task might want refreshing? >> +static void ssp_refresh_task(struct work_struct *work) >> +{ >> + struct ssp_data *data = container_of((struct delayed_work *)work, >> + struct ssp_data, work_refresh); >> + >> + dev_info(&data->spi->dev, "refreshing\n"); >> + >> + data->reset_cnt++; >> + >> + if (ssp_initialize_mcu(data) >= 0) { >> + ssp_sync_available_sensors(data); >> + if (data->last_ap_state != 0) >> + ssp_command(data, data->last_ap_state, 0); >> + >> + if (data->last_resume_state != 0) >> + ssp_command(data, data->last_resume_state, 0); >> + >> + data->timeout_cnt = 0; >> + data->com_fail_cnt = 0; >> + } >> +} >> + >> +int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay) >> +{ >> + cancel_delayed_work_sync(&data->work_refresh); >> + >> + return queue_delayed_work(system_power_efficient_wq, >> + &data->work_refresh, >> + msecs_to_jiffies(delay)); >> +} >> + >> +#ifdef CONFIG_OF >> +static struct of_device_id ssp_of_match[] = { >> + { >> + .compatible = "samsung,sensorhub-rinato", >> + .data = &ssp_rinato_info, >> + }, { >> + .compatible = "samsung,sensorhub-thermostat", >> + .data = &ssp_thermostat_info, >> + }, >> +}; >> +MODULE_DEVICE_TABLE(of, ssp_of_match); >> + >> +static struct ssp_data *ssp_parse_dt(struct device *dev) >> +{ >> + int ret; >> + struct ssp_data *data; >> + struct device_node *node = dev->of_node; >> + const struct of_device_id *match; >> + >> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); >> + if (!data) >> + return NULL; >> + >> + data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpio", 0); >> + if (data->mcu_ap_gpio < 0) >> + goto err_free_pd; >> + >> + data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpio", 0); >> + if (data->ap_mcu_gpio < 0) >> + goto err_free_pd; >> + > This looks a little inconsistent as your previous gpio's have had -gpio > on the end (not saying that's a good idea, but should be the same for all > I would guess). >> + data->mcu_reset = of_get_named_gpio(node, "mcu-reset", 0); >> + if (data->mcu_reset < 0) >> + goto err_free_pd; >> + >> + ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH, >> + "ap-mcu-gpio"); >> + if (ret) >> + goto err_free_pd; >> + >> + ret = devm_gpio_request_one(dev, data->mcu_reset, GPIOF_OUT_INIT_HIGH, >> + "mcu-reset"); >> + if (ret) >> + goto err_ap_mcu; >> + >> + match = of_match_node(ssp_of_match, node); >> + if (!match) >> + goto err_mcu_reset; >> + >> + data->sensorhub_info = (struct ssp_sensorhub_info *)match->data; >> + >> + dev_set_drvdata(dev, data); >> + >> + ret = of_platform_populate(node, NULL, NULL, dev); >> + if (ret < 0) { >> + dev_err(dev, "of_platform_populate fail\n"); >> + goto err_mcu_reset; >> + } >> + >> + return data; >> + >> +err_mcu_reset: >> + devm_gpio_free(dev, data->mcu_reset); >> +err_ap_mcu: >> + devm_gpio_free(dev, data->ap_mcu_gpio); >> +err_free_pd: >> + devm_kfree(dev, data); >> + return NULL; >> +} >> +#else >> +static struct ssp_data *ssp_parse_dt(struct platform_device *pdev) >> +{ >> + return NULL; >> +} >> +#endif >> + >> +/** >> + * ssp_register_consumer() - registers iio consumer in ssp framework >> + * >> + * @indio_dev: consumer iio device >> + * @type: ssp sensor type >> + */ >> +void ssp_register_consumer(struct iio_dev *indio_dev, enum ssp_sensor_type type) >> +{ >> + struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent); > That's one uggly way to get to the ssp_data structure. Perhaps we need > a few macros to make it obvious what we are jumping through? You mean something local like: #define SSP_GET_DEV_GRAMPA(iio_dev) (iio_dev->dev.parent->parent) or something in IIO: #define IIO_GET_DEV_PARENT(iio_dev) (iio_dev->dev.parent) ? > >> + >> + data->sensor_devs[type] = indio_dev; >> +} >> +EXPORT_SYMBOL(ssp_register_consumer); >> + >> +static int ssp_probe(struct spi_device *spi) >> +{ >> + int ret, i; >> + struct ssp_data *data; >> + >> + data = ssp_parse_dt(&spi->dev); >> + if (!data) { >> + dev_err(&spi->dev, "Failed to find platform data\n"); >> + return -ENODEV; >> + } >> + >> + spi->mode = SPI_MODE_1; >> + ret = spi_setup(spi); >> + if (ret < 0) { >> + dev_err(&spi->dev, "Failed to setup spi in %s\n", __func__); >> + return ret; >> + } >> + >> + data->fw_dl_state = SSP_FW_DL_STATE_NONE; >> + data->spi = spi; >> + spi_set_drvdata(spi, data); >> + >> + mutex_init(&data->comm_lock); >> + mutex_init(&data->pending_lock); >> + >> + for (i = 0; i < SSP_SENSOR_MAX; ++i) { >> + data->delay_buf[i] = SSP_DEFAULT_POLLING_DELAY; >> + data->batch_latency_buf[i] = 0; >> + data->batch_opt_buf[i] = 0; >> + data->check_status[i] = SSP_INITIALIZATION_STATE; >> + } >> + >> + data->delay_buf[SSP_BIO_HRM_LIB] = 100; >> + >> + data->time_syncing = true; >> + >> + INIT_LIST_HEAD(&data->pending_list); > The ordering in here is perhaps less than ideal. I'd expect to see this > list init next to the mutex that protects it. >> + >> + atomic_set(&data->enable_refcount, 0); >> + >> + INIT_WORK(&data->work_wdt, ssp_wdt_work_func); >> + INIT_DELAYED_WORK(&data->work_refresh, ssp_refresh_task); >> + >> + setup_timer(&data->wdt_timer, ssp_wdt_timer_func, (unsigned long)data); >> + >> + ret = request_threaded_irq(data->spi->irq, NULL, >> + sensordata_irq_thread_fn, >> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, >> + "SSP_Int", data); >> + if (ret < 0) { >> + dev_err(&spi->dev, "Irq request fail\n"); >> + goto err_setup_irq; >> + } >> + >> + /* Let's start with enabled one so irq balance could be ok */ >> + data->shut_down = false; >> + >> + /* just to avoid unbalanced irq set wake up */ >> + enable_irq_wake(data->spi->irq); >> + >> + data->fw_dl_state = ssp_check_fwbl(data); >> + if (data->fw_dl_state == SSP_FW_DL_STATE_NONE) { >> + ret = ssp_initialize_mcu(data); >> + if (ret < 0) { >> + dev_err(&spi->dev, "Initialize_mcu failed\n"); >> + goto err_read_reg; >> + } >> + } else { >> + dev_err(&spi->dev, "Firmware version not supported\n"); >> + ret = -EPERM; >> + goto err_read_reg; >> + } >> + >> + return 0; >> + >> +err_read_reg: >> + free_irq(data->spi->irq, data); >> +err_setup_irq: >> + mutex_destroy(&data->pending_lock); >> + mutex_destroy(&data->comm_lock); >> + >> + dev_err(&spi->dev, "Probe failed!\n"); >> + >> + return ret; >> +} >> + >> +static int ssp_remove(struct spi_device *spi) >> +{ >> + struct ssp_data *data = spi_get_drvdata(spi); >> + >> + if (ssp_command(data, SSP_MSG2SSP_AP_STATUS_SHUTDOWN, 0) < 0) >> + dev_err(&data->spi->dev, "SSP_MSG2SSP_AP_STATUS_SHUTDOWN failed\n"); >> + >> + ssp_enable_mcu(data, false); >> + ssp_disable_wdt_timer(data); >> + >> + ssp_clean_pending_list(data); >> + >> + free_irq(data->spi->irq, data); >> + >> + del_timer_sync(&data->wdt_timer); >> + cancel_work_sync(&data->work_wdt); >> + >> + mutex_destroy(&data->comm_lock); >> + mutex_destroy(&data->pending_lock); >> + >> +#ifdef CONFIG_OF >> + of_platform_depopulate(&spi->dev); >> +#endif >> + >> + return 0; >> +} >> + >> +static int ssp_suspend(struct device *dev) >> +{ >> + int ret; >> + struct ssp_data *data = spi_get_drvdata(to_spi_device(dev)); >> + >> + data->last_resume_state = SSP_MSG2SSP_AP_STATUS_SUSPEND; >> + >> + if (atomic_read(&data->enable_refcount) > 0) >> + ssp_disable_wdt_timer(data); >> + >> + ret = ssp_command(data, SSP_MSG2SSP_AP_STATUS_SUSPEND, 0); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, >> + "%s SSP_MSG2SSP_AP_STATUS_SUSPEND failed\n", __func__); >> + >> + ssp_enable_wdt_timer(data); >> + return ret; >> + } >> + >> + data->time_syncing = false; >> + disable_irq(data->spi->irq); >> + >> + return 0; >> +} >> + >> +static int ssp_resume(struct device *dev) >> +{ >> + int ret; >> + struct ssp_data *data = spi_get_drvdata(to_spi_device(dev)); >> + >> + enable_irq(data->spi->irq); >> + >> + if (atomic_read(&data->enable_refcount) > 0) >> + ssp_enable_wdt_timer(data); >> + >> + ret = ssp_command(data, SSP_MSG2SSP_AP_STATUS_RESUME, 0); >> + if (ret < 0) { >> + dev_err(&data->spi->dev, >> + "%s SSP_MSG2SSP_AP_STATUS_RESUME failed\n", __func__); >> + ssp_disable_wdt_timer(data); >> + return ret; >> + } >> + >> + /* timesyncing is set by MCU */ >> + >> + data->last_resume_state = SSP_MSG2SSP_AP_STATUS_RESUME; >> + >> + return 0; >> +} >> + >> +static const struct dev_pm_ops ssp_pm_ops = { >> + SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume) >> +}; >> + >> +static struct spi_driver ssp_driver = { >> + .probe = ssp_probe, >> + .remove = ssp_remove, >> + .driver = { >> + .pm = &ssp_pm_ops, >> + .bus = &spi_bus_type, >> + .owner = THIS_MODULE, >> + .of_match_table = of_match_ptr(ssp_of_match), >> + .name = "sensorhub" >> + }, >> +}; >> + >> +module_spi_driver(ssp_driver); >> + >> +MODULE_DESCRIPTION("ssp sensorhub driver"); >> +MODULE_AUTHOR("Samsung Electronics"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c >> new file mode 100644 >> index 0000000..44b99bc >> --- /dev/null >> +++ b/drivers/iio/common/ssp_sensors/ssp_spi.c >> @@ -0,0 +1,644 @@ >> +/* >> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> +#include "ssp.h" >> + >> +#define SSP_DEV (&data->spi->dev) >> +#define SSP_GET_MESSAGE_TYPE(data) (data & (3 << SSP_RW)) >> + >> +/* >> + * SSP -> AP Instruction >> + * They tell what packet type can be expected. In the future there will >> + * be less of them. BYPASS means common sensor packets with accel, gyro, >> + * hrm etc. data. LIBRARY and META are mock-up's for now. >> + */ >> +#define SSP_MSG2AP_INST_BYPASS_DATA 0x37 >> +#define SSP_MSG2AP_INST_LIBRARY_DATA 0x01 >> +#define SSP_MSG2AP_INST_DEBUG_DATA 0x03 >> +#define SSP_MSG2AP_INST_BIG_DATA 0x04 >> +#define SSP_MSG2AP_INST_META_DATA 0x05 >> +#define SSP_MSG2AP_INST_TIME_SYNC 0x06 >> +#define SSP_MSG2AP_INST_RESET 0x07 >> + >> +#define SSP_UNIMPLEMENTED -1 >> + >> +struct ssp_msg_header { >> + u8 cmd; >> + __le16 length; >> + __le16 options; >> + __le32 data; >> +} __attribute__((__packed__)); >> + >> +struct ssp_msg { >> + u16 length; >> + u16 options; >> + struct list_head list; >> + struct completion *done; >> + struct ssp_msg_header *h; >> + char *buffer; >> +}; >> + >> +static const int ssp_offset_map[SSP_SENSOR_MAX] = { >> + [SSP_ACCELEROMETER_SENSOR] = SSP_ACCELEROMETER_SIZE + >> + SSP_TIME_SIZE, >> + [SSP_GYROSCOPE_SENSOR] = SSP_GYROSCOPE_SIZE + >> + SSP_TIME_SIZE, >> + [SSP_GEOMAGNETIC_UNCALIB_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_GEOMAGNETIC_RAW] = SSP_UNIMPLEMENTED, >> + [SSP_GEOMAGNETIC_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_PRESSURE_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_GESTURE_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_PROXIMITY_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_TEMPERATURE_HUMIDITY_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_LIGHT_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_PROXIMITY_RAW] = SSP_UNIMPLEMENTED, >> + [SSP_ORIENTATION_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_STEP_DETECTOR] = SSP_UNIMPLEMENTED, >> + [SSP_SIG_MOTION_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_GYRO_UNCALIB_SENSOR] = SSP_UNIMPLEMENTED, >> + [SSP_GAME_ROTATION_VECTOR] = SSP_UNIMPLEMENTED, >> + [SSP_ROTATION_VECTOR] = SSP_UNIMPLEMENTED, >> + [SSP_STEP_COUNTER] = SSP_UNIMPLEMENTED, >> + [SSP_BIO_HRM_RAW] = SSP_BIO_HRM_RAW_SIZE + >> + SSP_TIME_SIZE, >> + [SSP_BIO_HRM_RAW_FAC] = SSP_BIO_HRM_RAW_FAC_SIZE + >> + SSP_TIME_SIZE, >> + [SSP_BIO_HRM_LIB] = SSP_BIO_HRM_LIB_SIZE + >> + SSP_TIME_SIZE, >> +}; >> + >> +#define SSP_HEADER_SIZE (sizeof(struct ssp_msg_header)) >> +#define SSP_HEADER_SIZE_ALIGNED (ALIGN(SSP_HEADER_SIZE, 4)) >> + > It strikes me that you do a lot of allocating and freeing of the buffers > in here. Whilst this is fine, perhaps preallocating space in your > ssp_data (making sure to enforce cache alignment) would be simpler > and quicker? That is the common way to avoid allocating spi buffers > on every transaction. I think that for commands there is no pain with that because they are allocated not very frequently. Maybe in the future I could modify that I could have prealocated set of buffers but also there are some places where the frames can have different sized which will be know after header parsing. You are right in case of irq header and accessing sensor data in callback provided by sensors. > > You could perhaps even roll the message header stuff etc into ssp_spi_sync? > (I haven't yet looked at that many call sites so that might not make sense!) > Would cut down on the boiler plate in the short functions towards the > end of this patch. >> +static struct ssp_msg *ssp_create_msg(u8 cmd, u16 len, u16 opt, u32 data) >> +{ >> + struct ssp_msg_header h; >> + struct ssp_msg *msg; >> + >> + msg = kzalloc(sizeof(*msg), GFP_KERNEL); >> + if (!msg) >> + return NULL; >> + >> + h.cmd = cmd; >> + h.length = cpu_to_le16(len); >> + h.options = cpu_to_le16(opt); >> + h.data = cpu_to_le32(data); >> + >> + msg->buffer = kzalloc(SSP_HEADER_SIZE_ALIGNED + len, >> + GFP_KERNEL | GFP_DMA); >> + if (!msg->buffer) { >> + kfree(msg); >> + return NULL; >> + } >> + >> + msg->length = len; >> + msg->options = opt; >> + >> + memcpy(msg->buffer, &h, SSP_HEADER_SIZE); >> + >> + return msg; >> +} >> + >> +static inline void ssp_fill_buffer(struct ssp_msg *m, unsigned int offset, >> + const void *src, unsigned int len) >> +{ >> + memcpy(&m->buffer[SSP_HEADER_SIZE_ALIGNED + offset], src, len); > > These seem a little heavy handed. Could you do this by getting a pointer > to the appropriate location instead? That way you'll often save on the > memory copies. Not that they are that extensive. > >> +} >> + >> +static inline void ssp_get_buffer(struct ssp_msg *m, unsigned int offset, >> + void *dest, unsigned int len) >> +{ >> + memcpy(dest, &m->buffer[SSP_HEADER_SIZE_ALIGNED + offset], len); >> +} >> + >> +#define ssp_get_buffer_AT_INDEX(m, index) \ >> + (m->buffer[SSP_HEADER_SIZE_ALIGNED + index]) > Novel mixture of upper and lower case. Please go with upper. >> +#define SSP_SET_BUFFER_AT_INDEX(m, index, val) \ >> + (m->buffer[SSP_HEADER_SIZE_ALIGNED + index] = val) >> + >> +static void ssp_clean_msg(struct ssp_msg *m) >> +{ >> + kfree(m->buffer); >> + kfree(m); >> +} >> + >> +static int ssp_print_mcu_debug(char *data_frame, int *data_index, >> + int received_len) >> +{ >> + int length = data_frame[(*data_index)++]; >> + >> + if (length > received_len - *data_index || length <= 0) { >> + ssp_dbg("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n", >> + length, received_len); >> + return length ? length : -EPROTO; >> + } >> + >> + ssp_dbg("[SSP]: MSG From MCU - %s\n", &data_frame[*data_index]); >> + >> + *data_index += length; >> + >> + return 0; >> +} >> + >> +/* >> + * It was designed that way - additional lines to some kind of handshake, >> + * please do not ask why - only the firmware guy can know it. > Indeed crazy. >> + */ >> +static int ssp_check_lines(struct ssp_data *data, bool state) >> +{ >> + int delay_cnt = 0; >> + >> + gpio_set_value_cansleep(data->ap_mcu_gpio, state); >> + >> + while (gpio_get_value_cansleep(data->mcu_ap_gpio) != state) { >> + usleep_range(3000, 3500); >> + >> + if (data->shut_down || delay_cnt++ > 500) { >> + dev_err(SSP_DEV, "%s:timeout, hw ack wait fail %d\n", >> + __func__, state); >> + >> + if (!state) >> + gpio_set_value_cansleep(data->ap_mcu_gpio, 1); >> + >> + return -ETIMEDOUT; >> + } >> + } >> + >> + return 0; >> +} >> + >> +static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg, >> + struct completion *done, int timeout) >> +{ >> + int status; >> + /* >> + * check if this is a short one way message or the whole transfer has >> + * second part after an interrupt >> + */ >> + const bool use_no_irq = msg->length == 0; > > I wonder if you'd be better off having a separate short_write function. > Might take a line or two more code, but would make it a little clearer > what is going on and simplify the code flow in this function a fair bit. > >> + >> + if (data->shut_down) >> + return -EPERM; >> + >> + msg->done = done; >> + >> + mutex_lock(&data->comm_lock); >> + >> + status = ssp_check_lines(data, false); >> + if (status < 0) >> + goto _error_locked; >> + >> + status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE); >> + if (status < 0) { >> + gpio_set_value_cansleep(data->ap_mcu_gpio, 1); >> + dev_err(SSP_DEV, "%s spi_write fail\n", __func__); >> + goto _error_locked; >> + } >> + >> + if (!use_no_irq) { >> + mutex_lock(&data->pending_lock); >> + list_add_tail(&msg->list, &data->pending_list); >> + mutex_unlock(&data->pending_lock); >> + } >> + >> + status = ssp_check_lines(data, true); >> + if (status < 0) { >> + if (!use_no_irq) { >> + mutex_lock(&data->pending_lock); >> + list_del(&msg->list); >> + mutex_unlock(&data->pending_lock); >> + } >> + goto _error_locked; >> + } >> + >> + mutex_unlock(&data->comm_lock); >> + >> + if (!use_no_irq && done) >> + if (wait_for_completion_timeout(done, >> + msecs_to_jiffies(timeout)) == >> + 0) { >> + mutex_lock(&data->pending_lock); >> + list_del(&msg->list); >> + mutex_unlock(&data->pending_lock); >> + >> + data->timeout_cnt++; >> + return -ETIMEDOUT; >> + } >> + >> + return 0; >> + >> +_error_locked: >> + mutex_unlock(&data->comm_lock); >> + data->timeout_cnt++; >> + return status; >> +} >> + >> +static inline int ssp_spi_sync_command(struct ssp_data *data, >> + struct ssp_msg *msg) >> +{ >> + return ssp_do_transfer(data, msg, NULL, 0); >> +} >> + >> +static int ssp_spi_sync(struct ssp_data *data, struct ssp_msg *msg, >> + int timeout) >> +{ >> + DECLARE_COMPLETION_ONSTACK(done); >> + >> + if (WARN_ON(!msg->length)) >> + return -EPERM; >> + >> + return ssp_do_transfer(data, msg, &done, timeout); >> +} >> + >> +static int ssp_handle_big_data(struct ssp_data *data, char *dataframe, int *idx) >> +{ >> + /* mock-up, it will be changed with adding another sensor types */ >> + *idx += 8; >> + return 0; >> +} >> + >> +static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len) >> +{ >> + int idx, sd; >> + struct timespec ts; >> + struct ssp_sensor_data *spd; >> + struct iio_dev **indio_devs = data->sensor_devs; >> + >> + getnstimeofday(&ts); >> + >> + for (idx = 0; idx < len;) { >> + switch (dataframe[idx++]) { >> + case SSP_MSG2AP_INST_BYPASS_DATA: >> + sd = dataframe[idx++]; >> + if (sd < 0 || sd >= SSP_SENSOR_MAX) { >> + dev_err(SSP_DEV, >> + "Mcu data frame1 error %d\n", sd); >> + return -EPROTO; >> + } >> + >> + if (indio_devs[sd]) { >> + spd = iio_priv(indio_devs[sd]); >> + if (spd->process_data) >> + spd->process_data(indio_devs[sd], >> + &dataframe[idx], >> + data->timestamp); >> + } else { >> + dev_err(SSP_DEV, "no client for frame\n"); >> + } >> + >> + idx += ssp_offset_map[sd]; >> + break; >> + case SSP_MSG2AP_INST_DEBUG_DATA: >> + sd = ssp_print_mcu_debug(dataframe, &idx, len); >> + if (sd) { >> + dev_err(SSP_DEV, >> + "Mcu data frame3 error %d\n", sd); >> + return sd; >> + } >> + break; >> + case SSP_MSG2AP_INST_LIBRARY_DATA: >> + idx += len; > That looks fun. What the heck is library data? Just curious ;) It is a mock-up only. I left this in case of such frame but it shoud not happen because the driver do not handle this yet. I will fix it because it is wrong (offset). While adding composite sensors I would like to add descriptive names. You are right that it looks stupid.. >> + break; >> + case SSP_MSG2AP_INST_BIG_DATA: >> + ssp_handle_big_data(data, dataframe, &idx); >> + break; >> + case SSP_MSG2AP_INST_TIME_SYNC: >> + data->time_syncing = true; >> + break; >> + case SSP_MSG2AP_INST_RESET: >> + ssp_queue_ssp_refresh_task(data, 0); >> + break; >> + } >> + } >> + >> + if (data->time_syncing) >> + data->timestamp = ts.tv_sec * 1000000000ULL + ts.tv_nsec; >> + >> + return 0; >> +} >> + >> +/* threaded irq */ >> +int ssp_irq_msg(struct ssp_data *data) >> +{ >> + bool found = false; >> + char *buffer; >> + __le16 *temp_buf; >> + u8 msg_type; >> + int ret; >> + u16 length, msg_options; >> + struct ssp_msg *msg, *n; >> + >> + temp_buf = kmalloc(4, GFP_KERNEL | GFP_DMA); >> + if (!temp_buf) >> + return -ENOMEM; > I'd poke this buffer in to ssp_data to avoid the need to allocate > it in this which is a moderately fast path. Remember to cacheline align > it. >> + >> + ret = spi_read(data->spi, temp_buf, 4); >> + if (ret < 0) { >> + dev_err(SSP_DEV, "header read fail\n"); >> + kfree(temp_buf); >> + return ret; >> + } >> + >> + length = le16_to_cpu(temp_buf[1]); >> + msg_options = le16_to_cpu(temp_buf[0]); >> + >> + kfree(temp_buf); >> + >> + if (length == 0) { >> + dev_err(SSP_DEV, "length received from mcu is 0\n"); >> + return -EINVAL; >> + } >> + >> + msg_type = SSP_GET_MESSAGE_TYPE(msg_options); >> + >> + switch (msg_type) { >> + case SSP_AP2HUB_READ: >> + case SSP_AP2HUB_WRITE: >> + /* >> + * this is a small list, a few elements - the packets can be >> + * received with no order > Ouch. >> + */ >> + mutex_lock(&data->pending_lock); >> + list_for_each_entry_safe(msg, n, &data->pending_list, list) { >> + if (msg->options == msg_options) { >> + list_del(&msg->list); >> + found = true; >> + break; >> + } >> + } >> + >> + if (!found) { >> + /* >> + * here can be implemented dead messages handling >> + * but the slave should not send such ones - it is to >> + * check but let's handle this >> + */ >> + buffer = kmalloc(length, GFP_KERNEL | GFP_DMA); >> + if (!buffer) { >> + ret = -ENOMEM; >> + goto _unlock; >> + } >> + >> + /* got dead packet so it is always an error */ >> + ret = spi_read(data->spi, buffer, length); >> + if (ret >= 0) >> + ret = -EPROTO; >> + >> + kfree(buffer); >> + >> + dev_err(SSP_DEV, "No match error %x\n", >> + msg_options); >> + >> + goto _unlock; >> + } >> + >> + if (msg_type == SSP_AP2HUB_READ) >> + ret = spi_read(data->spi, >> + &msg->buffer[SSP_HEADER_SIZE_ALIGNED], >> + msg->length); >> + >> + if (msg_type == SSP_AP2HUB_WRITE) { >> + ret = spi_write(data->spi, >> + &msg->buffer[SSP_HEADER_SIZE_ALIGNED], >> + msg->length); >> + if (msg_options & SSP_AP2HUB_RETURN) { >> + msg->options = >> + SSP_AP2HUB_READ | SSP_AP2HUB_RETURN; >> + msg->length = 1; >> + >> + list_add_tail(&msg->list, &data->pending_list); >> + goto _unlock; >> + } >> + } >> + >> + if (msg->done) >> + if (!completion_done(msg->done)) >> + complete(msg->done); >> +_unlock: >> + mutex_unlock(&data->pending_lock); >> + break; >> + case SSP_HUB2AP_WRITE: >> + buffer = kzalloc(length, GFP_KERNEL | GFP_DMA); >> + if (!buffer) >> + return -ENOMEM; >> + >> + ret = spi_read(data->spi, buffer, length); >> + if (ret < 0) { >> + dev_err(SSP_DEV, "spi read fail\n"); >> + kfree(buffer); >> + break; >> + } >> + >> + ret = ssp_parse_dataframe(data, buffer, length); >> + >> + kfree(buffer); >> + break; >> + >> + default: >> + dev_err(SSP_DEV, "unknown msg type\n"); >> + return -EPROTO; >> + } >> + >> + return ret; >> +} >> + >> +void ssp_clean_pending_list(struct ssp_data *data) >> +{ >> + struct ssp_msg *msg, *n; >> + >> + mutex_lock(&data->pending_lock); >> + list_for_each_entry_safe(msg, n, &data->pending_list, list) { >> + list_del(&msg->list); >> + >> + if (msg->done) >> + if (!completion_done(msg->done)) >> + complete(msg->done); >> + } >> + mutex_unlock(&data->pending_lock); >> +} >> + >> +int ssp_command(struct ssp_data *data, char command, int arg) >> +{ >> + int ret; >> + struct ssp_msg *msg; >> + >> + msg = ssp_create_msg(command, 0, SSP_AP2HUB_WRITE, arg); >> + if (!msg) >> + return -ENOMEM; >> + >> + ssp_dbg("%s - command 0x%x %d\n", __func__, command, arg); >> + >> + ret = ssp_spi_sync_command(data, msg); >> + ssp_clean_msg(msg); >> + >> + return ret; >> +} >> + >> +int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type, >> + u8 *send_buf, u8 length) >> +{ >> + int ret; >> + struct ssp_msg *msg; >> + >> + if (data->fw_dl_state == SSP_FW_DL_STATE_DOWNLOADING) { >> + dev_err(SSP_DEV, "%s - Skip Inst! DL state = %d\n", >> + __func__, data->fw_dl_state); >> + return -EBUSY; >> + } else if (!(data->available_sensors & BIT(sensor_type)) && >> + (inst <= SSP_MSG2SSP_INST_CHANGE_DELAY)) { >> + dev_err(SSP_DEV, "%s - Bypass Inst Skip! - %u\n", >> + __func__, sensor_type); >> + return -EIO; /* just fail */ >> + } >> + >> + msg = ssp_create_msg(inst, length + 2, SSP_AP2HUB_WRITE, 0); >> + if (!msg) >> + return -ENOMEM; >> + >> + ssp_fill_buffer(msg, 0, &sensor_type, 1); >> + ssp_fill_buffer(msg, 1, send_buf, length); >> + >> + ssp_dbg("%s - Inst = 0x%x, Sensor Type = 0x%x, data = %u\n", >> + __func__, inst, sensor_type, send_buf[1]); >> + >> + ret = ssp_spi_sync(data, msg, 1000); >> + ssp_clean_msg(msg); >> + >> + return ret; >> +} >> + >> +int ssp_get_chipid(struct ssp_data *data) >> +{ >> + int ret; >> + char buffer; >> + struct ssp_msg *msg; >> + >> + msg = ssp_create_msg(SSP_MSG2SSP_AP_WHOAMI, 1, SSP_AP2HUB_READ, 0); >> + if (!msg) >> + return -ENOMEM; >> + >> + ret = ssp_spi_sync(data, msg, 1000); >> + >> + buffer = ssp_get_buffer_AT_INDEX(msg, 0); >> + >> + ssp_clean_msg(msg); >> + >> + return ret < 0 ? ret : buffer; >> +} >> + > Perhaps some comments on what these functions are actually doing? I have > several ideas what a set_sensor_position function, might be doing :) > Ah, I see from your comments that you don't know what it is doing either ;) >> +int ssp_set_sensor_position(struct ssp_data *data) >> +{ >> + int ret; >> + >> + struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_SENSOR_FORMATION, 3, >> + SSP_AP2HUB_WRITE, 0); >> + if (!msg) >> + return -ENOMEM; >> + >> + /* >> + * this needs some clarification with the protocol, default they will >> + * be 0 so it is ok >> + */ >> + SSP_SET_BUFFER_AT_INDEX(msg, 0, data->accel_position); >> + SSP_SET_BUFFER_AT_INDEX(msg, 1, data->accel_position); >> + SSP_SET_BUFFER_AT_INDEX(msg, 2, data->mag_position); >> + >> + ret = ssp_spi_sync(data, msg, 1000); >> + if (ret < 0) { >> + dev_err(SSP_DEV, "%s - fail to ssp_set_sensor_position %d\n", >> + __func__, ret); >> + } else { >> + dev_info(SSP_DEV, >> + "Sensor Position A : %u, G : %u, M: %u, P: %u\n", >> + data->accel_position, data->accel_position, >> + data->mag_position, 0); >> + } >> + >> + ssp_clean_msg(msg); >> + >> + return ret; >> +} >> + >> +int ssp_set_magnetic_matrix(struct ssp_data *data) >> +{ >> + int ret; >> + struct ssp_msg *msg; >> + >> + msg = ssp_create_msg(SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX, >> + data->sensorhub_info->mag_length, SSP_AP2HUB_WRITE, >> + 0); >> + if (!msg) >> + return -ENOMEM; >> + >> + ssp_fill_buffer(msg, 0, data->sensorhub_info->mag_table, >> + data->sensorhub_info->mag_length); >> + >> + ret = ssp_spi_sync(data, msg, 1000); >> + ssp_clean_msg(msg); >> + >> + return ret; >> +} >> + >> +unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data) >> +{ >> + int ret; >> + __le32 result; >> + u32 cpu_result = 0; >> + >> + struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_SENSOR_SCANNING, 4, >> + SSP_AP2HUB_READ, 0); >> + if (!msg) >> + return 0; >> + >> + ret = ssp_spi_sync(data, msg, 1000); >> + if (ret < 0) { >> + dev_err(SSP_DEV, "%s - spi read fail %d\n", __func__, ret); >> + goto _exit; >> + } >> + >> + ssp_get_buffer(msg, 0, &result, 4); >> + cpu_result = le32_to_cpu(result); >> + >> + dev_info(SSP_DEV, "%s state: 0x%08x\n", __func__, cpu_result); >> + >> +_exit: >> + ssp_clean_msg(msg); >> + return cpu_result; >> +} >> + >> +unsigned int ssp_get_firmware_rev(struct ssp_data *data) >> +{ >> + int ret; >> + __le32 result; >> + >> + struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_FIRMWARE_REV, 4, >> + SSP_AP2HUB_READ, 0); >> + if (!msg) >> + return SSP_INVALID_REVISION; >> + >> + ret = ssp_spi_sync(data, msg, 1000); >> + ssp_get_buffer(msg, 0, &result, 4); > Seems a little odd to get the buffer before checking the return value. > Is there a reason for this that I'm missing. If not please reorder. > >> + if (ret < 0) { >> + dev_err(SSP_DEV, "%s - transfer fail %d\n", __func__, ret); >> + ret = SSP_INVALID_REVISION; >> + goto _exit; >> + } >> + >> + ret = le32_to_cpu(result); >> + >> +_exit: >> + ssp_clean_msg(msg); >> + return ret; >> +} >> diff --git a/include/linux/iio/common/ssp_sensors.h b/include/linux/iio/common/ssp_sensors.h >> new file mode 100644 >> index 0000000..c6001e9 >> --- /dev/null >> +++ b/include/linux/iio/common/ssp_sensors.h >> @@ -0,0 +1,80 @@ >> +/* >> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> +#ifndef _SSP_SENSORS_H_ >> +#define _SSP_SENSORS_H_ >> + >> +#include >> + >> +#define SSP_TIME_SIZE 4 >> +#define SSP_ACCELEROMETER_SIZE 6 >> +#define SSP_GYROSCOPE_SIZE 6 >> +#define SSP_BIO_HRM_RAW_SIZE 8 >> +#define SSP_BIO_HRM_RAW_FAC_SIZE 36 >> +#define SSP_BIO_HRM_LIB_SIZE 8 >> + >> +/** >> + * enum ssp_sensor_type - SSP sensor type >> + */ >> +enum ssp_sensor_type { >> + SSP_ACCELEROMETER_SENSOR = 0, >> + SSP_GYROSCOPE_SENSOR, >> + SSP_GEOMAGNETIC_UNCALIB_SENSOR, >> + SSP_GEOMAGNETIC_RAW, >> + SSP_GEOMAGNETIC_SENSOR, >> + SSP_PRESSURE_SENSOR, >> + SSP_GESTURE_SENSOR, >> + SSP_PROXIMITY_SENSOR, >> + SSP_TEMPERATURE_HUMIDITY_SENSOR, >> + SSP_LIGHT_SENSOR, >> + SSP_PROXIMITY_RAW, >> + SSP_ORIENTATION_SENSOR, >> + SSP_STEP_DETECTOR, >> + SSP_SIG_MOTION_SENSOR, >> + SSP_GYRO_UNCALIB_SENSOR, >> + SSP_GAME_ROTATION_VECTOR, >> + SSP_ROTATION_VECTOR, >> + SSP_STEP_COUNTER, >> + SSP_BIO_HRM_RAW, >> + SSP_BIO_HRM_RAW_FAC, >> + SSP_BIO_HRM_LIB, >> + SSP_SENSOR_MAX, >> +}; > Just looking at this list, I guess one or two won't ultimately fit > in IIO, but the majority will (and we already do similar to this > with the hid-sensors driver which supports the odd thing outside > IIO). >> + >> +struct ssp_data; >> + >> +/** >> + * struct ssp_sensor_data - Sensor object >> + * @process_data: Callback to feed sensor data. >> + * @type: Used sensor type. >> + */ >> +struct ssp_sensor_data { >> + int (*process_data)(struct iio_dev *indio_dev, void *buf, >> + int64_t timestamp); >> + enum ssp_sensor_type type; >> +}; >> + >> +void ssp_register_consumer(struct iio_dev *indio_dev, >> + enum ssp_sensor_type type); >> + >> +int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type, >> + u32 delay); >> + >> +int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type); >> + >> +u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type); >> + >> +int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type, >> + u32 delay); >> +#endif /* _SSP_SENSORS_H_ */ >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/