Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965588AbbBCCAw (ORCPT ); Mon, 2 Feb 2015 21:00:52 -0500 Received: from mail-gw1-out.broadcom.com ([216.31.210.62]:48156 "EHLO mail-gw1-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965553AbbBCCAq (ORCPT ); Mon, 2 Feb 2015 21:00:46 -0500 X-IronPort-AV: E=Sophos;i="5.09,509,1418112000"; d="scan'208";a="56312363" From: Ray Jui To: Linus Walleij , Stephen Warren , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , "Grant Likely" , Christian Daudt , Matt Porter , Florian Fainelli , Russell King CC: Scott Branden , Dmitry Torokhov , Anatol Pomazau , , , , , , "Ray Jui" Subject: [PATCH v3 1/4] pinctrl: bcm: consolidate Broadcom pinctrl drivers Date: Mon, 2 Feb 2015 18:01:31 -0800 Message-ID: <1422928894-20716-2-git-send-email-rjui@broadcom.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1422928894-20716-1-git-send-email-rjui@broadcom.com> References: <1422928894-20716-1-git-send-email-rjui@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 163405 Lines: 5202 Consolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/* Signed-off-by: Ray Jui --- drivers/pinctrl/Kconfig | 19 +- drivers/pinctrl/Makefile | 4 +- drivers/pinctrl/bcm/Kconfig | 21 + drivers/pinctrl/bcm/Makefile | 4 + drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 1455 ++++++++++++++++++++++++++++++++ drivers/pinctrl/bcm/pinctrl-bcm2835.c | 1072 +++++++++++++++++++++++ drivers/pinctrl/pinctrl-bcm281xx.c | 1455 -------------------------------- drivers/pinctrl/pinctrl-bcm2835.c | 1072 ----------------------- 8 files changed, 2555 insertions(+), 2547 deletions(-) create mode 100644 drivers/pinctrl/bcm/Kconfig create mode 100644 drivers/pinctrl/bcm/Makefile create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm281xx.c create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2835.c delete mode 100644 drivers/pinctrl/pinctrl-bcm281xx.c delete mode 100644 drivers/pinctrl/pinctrl-bcm2835.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index d014f22..6cfdad7 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -67,24 +67,6 @@ config PINCTRL_AT91 help Say Y here to enable the at91 pinctrl driver -config PINCTRL_BCM2835 - bool - select PINMUX - select PINCONF - -config PINCTRL_BCM281XX - bool "Broadcom BCM281xx pinctrl driver" - depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST) - select PINMUX - select PINCONF - select GENERIC_PINCONF - select REGMAP_MMIO - help - Say Y here to support Broadcom BCM281xx pinctrl driver, which is used - for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, - BCM28145, and BCM28155 SoCs. This driver requires the pinctrl - framework. GPIO is provided by a separate GPIO driver. - config PINCTRL_LANTIQ bool depends on LANTIQ @@ -191,6 +173,7 @@ config PINCTRL_PALMAS open drain configuration for the Palmas series devices like TPS65913, TPS80036 etc. +source "drivers/pinctrl/bcm/Kconfig" source "drivers/pinctrl/berlin/Kconfig" source "drivers/pinctrl/freescale/Kconfig" source "drivers/pinctrl/intel/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index c030b3d..c018bbf 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -14,8 +14,6 @@ obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o -obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o -obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o @@ -36,6 +34,8 @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o +obj-$(CONFIG_ARCH_BCM) += bcm/ +obj-$(CONFIG_ARCH_BCM2835) += bcm/ obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-y += freescale/ obj-$(CONFIG_X86) += intel/ diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig new file mode 100644 index 0000000..bc6d048 --- /dev/null +++ b/drivers/pinctrl/bcm/Kconfig @@ -0,0 +1,21 @@ +# +# Broadcom pinctrl drivers +# + +config PINCTRL_BCM281XX + bool "Broadcom BCM281xx pinctrl driver" + depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST) + select PINMUX + select PINCONF + select GENERIC_PINCONF + select REGMAP_MMIO + help + Say Y here to support Broadcom BCM281xx pinctrl driver, which is used + for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, + BCM28145, and BCM28155 SoCs. This driver requires the pinctrl + framework. GPIO is provided by a separate GPIO driver. + +config PINCTRL_BCM2835 + bool + select PINMUX + select PINCONF diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile new file mode 100644 index 0000000..7ba80a3 --- /dev/null +++ b/drivers/pinctrl/bcm/Makefile @@ -0,0 +1,4 @@ +# Broadcom pinctrl support + +obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o +obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c new file mode 100644 index 0000000..73d99076 --- /dev/null +++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c @@ -0,0 +1,1455 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core.h" +#include "../pinctrl-utils.h" + +/* BCM281XX Pin Control Registers Definitions */ + +/* Function Select bits are the same for all pin control registers */ +#define BCM281XX_PIN_REG_F_SEL_MASK 0x0700 +#define BCM281XX_PIN_REG_F_SEL_SHIFT 8 + +/* Standard pin register */ +#define BCM281XX_STD_PIN_REG_DRV_STR_MASK 0x0007 +#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT 0 +#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK 0x0008 +#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT 3 +#define BCM281XX_STD_PIN_REG_SLEW_MASK 0x0010 +#define BCM281XX_STD_PIN_REG_SLEW_SHIFT 4 +#define BCM281XX_STD_PIN_REG_PULL_UP_MASK 0x0020 +#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT 5 +#define BCM281XX_STD_PIN_REG_PULL_DN_MASK 0x0040 +#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT 6 +#define BCM281XX_STD_PIN_REG_HYST_MASK 0x0080 +#define BCM281XX_STD_PIN_REG_HYST_SHIFT 7 + +/* I2C pin register */ +#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK 0x0004 +#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT 2 +#define BCM281XX_I2C_PIN_REG_SLEW_MASK 0x0008 +#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT 3 +#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK 0x0070 +#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT 4 + +/* HDMI pin register */ +#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK 0x0008 +#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT 3 +#define BCM281XX_HDMI_PIN_REG_MODE_MASK 0x0010 +#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT 4 + +/** + * bcm281xx_pin_type - types of pin register + */ +enum bcm281xx_pin_type { + BCM281XX_PIN_TYPE_UNKNOWN = 0, + BCM281XX_PIN_TYPE_STD, + BCM281XX_PIN_TYPE_I2C, + BCM281XX_PIN_TYPE_HDMI, +}; + +static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD; +static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C; +static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI; + +/** + * bcm281xx_pin_function- define pin function + */ +struct bcm281xx_pin_function { + const char *name; + const char * const *groups; + const unsigned ngroups; +}; + +/** + * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data + * @reg_base - base of pinctrl registers + */ +struct bcm281xx_pinctrl_data { + void __iomem *reg_base; + + /* List of all pins */ + const struct pinctrl_pin_desc *pins; + const unsigned npins; + + const struct bcm281xx_pin_function *functions; + const unsigned nfunctions; + + struct regmap *regmap; +}; + +/* + * Pin number definition. The order here must be the same as defined in the + * PADCTRLREG block in the RDB. + */ +#define BCM281XX_PIN_ADCSYNC 0 +#define BCM281XX_PIN_BAT_RM 1 +#define BCM281XX_PIN_BSC1_SCL 2 +#define BCM281XX_PIN_BSC1_SDA 3 +#define BCM281XX_PIN_BSC2_SCL 4 +#define BCM281XX_PIN_BSC2_SDA 5 +#define BCM281XX_PIN_CLASSGPWR 6 +#define BCM281XX_PIN_CLK_CX8 7 +#define BCM281XX_PIN_CLKOUT_0 8 +#define BCM281XX_PIN_CLKOUT_1 9 +#define BCM281XX_PIN_CLKOUT_2 10 +#define BCM281XX_PIN_CLKOUT_3 11 +#define BCM281XX_PIN_CLKREQ_IN_0 12 +#define BCM281XX_PIN_CLKREQ_IN_1 13 +#define BCM281XX_PIN_CWS_SYS_REQ1 14 +#define BCM281XX_PIN_CWS_SYS_REQ2 15 +#define BCM281XX_PIN_CWS_SYS_REQ3 16 +#define BCM281XX_PIN_DIGMIC1_CLK 17 +#define BCM281XX_PIN_DIGMIC1_DQ 18 +#define BCM281XX_PIN_DIGMIC2_CLK 19 +#define BCM281XX_PIN_DIGMIC2_DQ 20 +#define BCM281XX_PIN_GPEN13 21 +#define BCM281XX_PIN_GPEN14 22 +#define BCM281XX_PIN_GPEN15 23 +#define BCM281XX_PIN_GPIO00 24 +#define BCM281XX_PIN_GPIO01 25 +#define BCM281XX_PIN_GPIO02 26 +#define BCM281XX_PIN_GPIO03 27 +#define BCM281XX_PIN_GPIO04 28 +#define BCM281XX_PIN_GPIO05 29 +#define BCM281XX_PIN_GPIO06 30 +#define BCM281XX_PIN_GPIO07 31 +#define BCM281XX_PIN_GPIO08 32 +#define BCM281XX_PIN_GPIO09 33 +#define BCM281XX_PIN_GPIO10 34 +#define BCM281XX_PIN_GPIO11 35 +#define BCM281XX_PIN_GPIO12 36 +#define BCM281XX_PIN_GPIO13 37 +#define BCM281XX_PIN_GPIO14 38 +#define BCM281XX_PIN_GPS_PABLANK 39 +#define BCM281XX_PIN_GPS_TMARK 40 +#define BCM281XX_PIN_HDMI_SCL 41 +#define BCM281XX_PIN_HDMI_SDA 42 +#define BCM281XX_PIN_IC_DM 43 +#define BCM281XX_PIN_IC_DP 44 +#define BCM281XX_PIN_KP_COL_IP_0 45 +#define BCM281XX_PIN_KP_COL_IP_1 46 +#define BCM281XX_PIN_KP_COL_IP_2 47 +#define BCM281XX_PIN_KP_COL_IP_3 48 +#define BCM281XX_PIN_KP_ROW_OP_0 49 +#define BCM281XX_PIN_KP_ROW_OP_1 50 +#define BCM281XX_PIN_KP_ROW_OP_2 51 +#define BCM281XX_PIN_KP_ROW_OP_3 52 +#define BCM281XX_PIN_LCD_B_0 53 +#define BCM281XX_PIN_LCD_B_1 54 +#define BCM281XX_PIN_LCD_B_2 55 +#define BCM281XX_PIN_LCD_B_3 56 +#define BCM281XX_PIN_LCD_B_4 57 +#define BCM281XX_PIN_LCD_B_5 58 +#define BCM281XX_PIN_LCD_B_6 59 +#define BCM281XX_PIN_LCD_B_7 60 +#define BCM281XX_PIN_LCD_G_0 61 +#define BCM281XX_PIN_LCD_G_1 62 +#define BCM281XX_PIN_LCD_G_2 63 +#define BCM281XX_PIN_LCD_G_3 64 +#define BCM281XX_PIN_LCD_G_4 65 +#define BCM281XX_PIN_LCD_G_5 66 +#define BCM281XX_PIN_LCD_G_6 67 +#define BCM281XX_PIN_LCD_G_7 68 +#define BCM281XX_PIN_LCD_HSYNC 69 +#define BCM281XX_PIN_LCD_OE 70 +#define BCM281XX_PIN_LCD_PCLK 71 +#define BCM281XX_PIN_LCD_R_0 72 +#define BCM281XX_PIN_LCD_R_1 73 +#define BCM281XX_PIN_LCD_R_2 74 +#define BCM281XX_PIN_LCD_R_3 75 +#define BCM281XX_PIN_LCD_R_4 76 +#define BCM281XX_PIN_LCD_R_5 77 +#define BCM281XX_PIN_LCD_R_6 78 +#define BCM281XX_PIN_LCD_R_7 79 +#define BCM281XX_PIN_LCD_VSYNC 80 +#define BCM281XX_PIN_MDMGPIO0 81 +#define BCM281XX_PIN_MDMGPIO1 82 +#define BCM281XX_PIN_MDMGPIO2 83 +#define BCM281XX_PIN_MDMGPIO3 84 +#define BCM281XX_PIN_MDMGPIO4 85 +#define BCM281XX_PIN_MDMGPIO5 86 +#define BCM281XX_PIN_MDMGPIO6 87 +#define BCM281XX_PIN_MDMGPIO7 88 +#define BCM281XX_PIN_MDMGPIO8 89 +#define BCM281XX_PIN_MPHI_DATA_0 90 +#define BCM281XX_PIN_MPHI_DATA_1 91 +#define BCM281XX_PIN_MPHI_DATA_2 92 +#define BCM281XX_PIN_MPHI_DATA_3 93 +#define BCM281XX_PIN_MPHI_DATA_4 94 +#define BCM281XX_PIN_MPHI_DATA_5 95 +#define BCM281XX_PIN_MPHI_DATA_6 96 +#define BCM281XX_PIN_MPHI_DATA_7 97 +#define BCM281XX_PIN_MPHI_DATA_8 98 +#define BCM281XX_PIN_MPHI_DATA_9 99 +#define BCM281XX_PIN_MPHI_DATA_10 100 +#define BCM281XX_PIN_MPHI_DATA_11 101 +#define BCM281XX_PIN_MPHI_DATA_12 102 +#define BCM281XX_PIN_MPHI_DATA_13 103 +#define BCM281XX_PIN_MPHI_DATA_14 104 +#define BCM281XX_PIN_MPHI_DATA_15 105 +#define BCM281XX_PIN_MPHI_HA0 106 +#define BCM281XX_PIN_MPHI_HAT0 107 +#define BCM281XX_PIN_MPHI_HAT1 108 +#define BCM281XX_PIN_MPHI_HCE0_N 109 +#define BCM281XX_PIN_MPHI_HCE1_N 110 +#define BCM281XX_PIN_MPHI_HRD_N 111 +#define BCM281XX_PIN_MPHI_HWR_N 112 +#define BCM281XX_PIN_MPHI_RUN0 113 +#define BCM281XX_PIN_MPHI_RUN1 114 +#define BCM281XX_PIN_MTX_SCAN_CLK 115 +#define BCM281XX_PIN_MTX_SCAN_DATA 116 +#define BCM281XX_PIN_NAND_AD_0 117 +#define BCM281XX_PIN_NAND_AD_1 118 +#define BCM281XX_PIN_NAND_AD_2 119 +#define BCM281XX_PIN_NAND_AD_3 120 +#define BCM281XX_PIN_NAND_AD_4 121 +#define BCM281XX_PIN_NAND_AD_5 122 +#define BCM281XX_PIN_NAND_AD_6 123 +#define BCM281XX_PIN_NAND_AD_7 124 +#define BCM281XX_PIN_NAND_ALE 125 +#define BCM281XX_PIN_NAND_CEN_0 126 +#define BCM281XX_PIN_NAND_CEN_1 127 +#define BCM281XX_PIN_NAND_CLE 128 +#define BCM281XX_PIN_NAND_OEN 129 +#define BCM281XX_PIN_NAND_RDY_0 130 +#define BCM281XX_PIN_NAND_RDY_1 131 +#define BCM281XX_PIN_NAND_WEN 132 +#define BCM281XX_PIN_NAND_WP 133 +#define BCM281XX_PIN_PC1 134 +#define BCM281XX_PIN_PC2 135 +#define BCM281XX_PIN_PMU_INT 136 +#define BCM281XX_PIN_PMU_SCL 137 +#define BCM281XX_PIN_PMU_SDA 138 +#define BCM281XX_PIN_RFST2G_MTSLOTEN3G 139 +#define BCM281XX_PIN_RGMII_0_RX_CTL 140 +#define BCM281XX_PIN_RGMII_0_RXC 141 +#define BCM281XX_PIN_RGMII_0_RXD_0 142 +#define BCM281XX_PIN_RGMII_0_RXD_1 143 +#define BCM281XX_PIN_RGMII_0_RXD_2 144 +#define BCM281XX_PIN_RGMII_0_RXD_3 145 +#define BCM281XX_PIN_RGMII_0_TX_CTL 146 +#define BCM281XX_PIN_RGMII_0_TXC 147 +#define BCM281XX_PIN_RGMII_0_TXD_0 148 +#define BCM281XX_PIN_RGMII_0_TXD_1 149 +#define BCM281XX_PIN_RGMII_0_TXD_2 150 +#define BCM281XX_PIN_RGMII_0_TXD_3 151 +#define BCM281XX_PIN_RGMII_1_RX_CTL 152 +#define BCM281XX_PIN_RGMII_1_RXC 153 +#define BCM281XX_PIN_RGMII_1_RXD_0 154 +#define BCM281XX_PIN_RGMII_1_RXD_1 155 +#define BCM281XX_PIN_RGMII_1_RXD_2 156 +#define BCM281XX_PIN_RGMII_1_RXD_3 157 +#define BCM281XX_PIN_RGMII_1_TX_CTL 158 +#define BCM281XX_PIN_RGMII_1_TXC 159 +#define BCM281XX_PIN_RGMII_1_TXD_0 160 +#define BCM281XX_PIN_RGMII_1_TXD_1 161 +#define BCM281XX_PIN_RGMII_1_TXD_2 162 +#define BCM281XX_PIN_RGMII_1_TXD_3 163 +#define BCM281XX_PIN_RGMII_GPIO_0 164 +#define BCM281XX_PIN_RGMII_GPIO_1 165 +#define BCM281XX_PIN_RGMII_GPIO_2 166 +#define BCM281XX_PIN_RGMII_GPIO_3 167 +#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1 168 +#define BCM281XX_PIN_RTXEN2G_TXDATA3G2 169 +#define BCM281XX_PIN_RXDATA3G0 170 +#define BCM281XX_PIN_RXDATA3G1 171 +#define BCM281XX_PIN_RXDATA3G2 172 +#define BCM281XX_PIN_SDIO1_CLK 173 +#define BCM281XX_PIN_SDIO1_CMD 174 +#define BCM281XX_PIN_SDIO1_DATA_0 175 +#define BCM281XX_PIN_SDIO1_DATA_1 176 +#define BCM281XX_PIN_SDIO1_DATA_2 177 +#define BCM281XX_PIN_SDIO1_DATA_3 178 +#define BCM281XX_PIN_SDIO4_CLK 179 +#define BCM281XX_PIN_SDIO4_CMD 180 +#define BCM281XX_PIN_SDIO4_DATA_0 181 +#define BCM281XX_PIN_SDIO4_DATA_1 182 +#define BCM281XX_PIN_SDIO4_DATA_2 183 +#define BCM281XX_PIN_SDIO4_DATA_3 184 +#define BCM281XX_PIN_SIM_CLK 185 +#define BCM281XX_PIN_SIM_DATA 186 +#define BCM281XX_PIN_SIM_DET 187 +#define BCM281XX_PIN_SIM_RESETN 188 +#define BCM281XX_PIN_SIM2_CLK 189 +#define BCM281XX_PIN_SIM2_DATA 190 +#define BCM281XX_PIN_SIM2_DET 191 +#define BCM281XX_PIN_SIM2_RESETN 192 +#define BCM281XX_PIN_SRI_C 193 +#define BCM281XX_PIN_SRI_D 194 +#define BCM281XX_PIN_SRI_E 195 +#define BCM281XX_PIN_SSP_EXTCLK 196 +#define BCM281XX_PIN_SSP0_CLK 197 +#define BCM281XX_PIN_SSP0_FS 198 +#define BCM281XX_PIN_SSP0_RXD 199 +#define BCM281XX_PIN_SSP0_TXD 200 +#define BCM281XX_PIN_SSP2_CLK 201 +#define BCM281XX_PIN_SSP2_FS_0 202 +#define BCM281XX_PIN_SSP2_FS_1 203 +#define BCM281XX_PIN_SSP2_FS_2 204 +#define BCM281XX_PIN_SSP2_FS_3 205 +#define BCM281XX_PIN_SSP2_RXD_0 206 +#define BCM281XX_PIN_SSP2_RXD_1 207 +#define BCM281XX_PIN_SSP2_TXD_0 208 +#define BCM281XX_PIN_SSP2_TXD_1 209 +#define BCM281XX_PIN_SSP3_CLK 210 +#define BCM281XX_PIN_SSP3_FS 211 +#define BCM281XX_PIN_SSP3_RXD 212 +#define BCM281XX_PIN_SSP3_TXD 213 +#define BCM281XX_PIN_SSP4_CLK 214 +#define BCM281XX_PIN_SSP4_FS 215 +#define BCM281XX_PIN_SSP4_RXD 216 +#define BCM281XX_PIN_SSP4_TXD 217 +#define BCM281XX_PIN_SSP5_CLK 218 +#define BCM281XX_PIN_SSP5_FS 219 +#define BCM281XX_PIN_SSP5_RXD 220 +#define BCM281XX_PIN_SSP5_TXD 221 +#define BCM281XX_PIN_SSP6_CLK 222 +#define BCM281XX_PIN_SSP6_FS 223 +#define BCM281XX_PIN_SSP6_RXD 224 +#define BCM281XX_PIN_SSP6_TXD 225 +#define BCM281XX_PIN_STAT_1 226 +#define BCM281XX_PIN_STAT_2 227 +#define BCM281XX_PIN_SYSCLKEN 228 +#define BCM281XX_PIN_TRACECLK 229 +#define BCM281XX_PIN_TRACEDT00 230 +#define BCM281XX_PIN_TRACEDT01 231 +#define BCM281XX_PIN_TRACEDT02 232 +#define BCM281XX_PIN_TRACEDT03 233 +#define BCM281XX_PIN_TRACEDT04 234 +#define BCM281XX_PIN_TRACEDT05 235 +#define BCM281XX_PIN_TRACEDT06 236 +#define BCM281XX_PIN_TRACEDT07 237 +#define BCM281XX_PIN_TRACEDT08 238 +#define BCM281XX_PIN_TRACEDT09 239 +#define BCM281XX_PIN_TRACEDT10 240 +#define BCM281XX_PIN_TRACEDT11 241 +#define BCM281XX_PIN_TRACEDT12 242 +#define BCM281XX_PIN_TRACEDT13 243 +#define BCM281XX_PIN_TRACEDT14 244 +#define BCM281XX_PIN_TRACEDT15 245 +#define BCM281XX_PIN_TXDATA3G0 246 +#define BCM281XX_PIN_TXPWRIND 247 +#define BCM281XX_PIN_UARTB1_UCTS 248 +#define BCM281XX_PIN_UARTB1_URTS 249 +#define BCM281XX_PIN_UARTB1_URXD 250 +#define BCM281XX_PIN_UARTB1_UTXD 251 +#define BCM281XX_PIN_UARTB2_URXD 252 +#define BCM281XX_PIN_UARTB2_UTXD 253 +#define BCM281XX_PIN_UARTB3_UCTS 254 +#define BCM281XX_PIN_UARTB3_URTS 255 +#define BCM281XX_PIN_UARTB3_URXD 256 +#define BCM281XX_PIN_UARTB3_UTXD 257 +#define BCM281XX_PIN_UARTB4_UCTS 258 +#define BCM281XX_PIN_UARTB4_URTS 259 +#define BCM281XX_PIN_UARTB4_URXD 260 +#define BCM281XX_PIN_UARTB4_UTXD 261 +#define BCM281XX_PIN_VC_CAM1_SCL 262 +#define BCM281XX_PIN_VC_CAM1_SDA 263 +#define BCM281XX_PIN_VC_CAM2_SCL 264 +#define BCM281XX_PIN_VC_CAM2_SDA 265 +#define BCM281XX_PIN_VC_CAM3_SCL 266 +#define BCM281XX_PIN_VC_CAM3_SDA 267 + +#define BCM281XX_PIN_DESC(a, b, c) \ + { .number = a, .name = b, .drv_data = &c##_pin } + +/* + * Pin description definition. The order here must be the same as defined in + * the PADCTRLREG block in the RDB, since the pin number is used as an index + * into this array. + */ +static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = { + BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi), + BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi), + BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g", + std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1, + "rtxdata2g_txdata3g1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2", + std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std), + BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c), + BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c), +}; + +static const char * const bcm281xx_alt_groups[] = { + "adcsync", + "bat_rm", + "bsc1_scl", + "bsc1_sda", + "bsc2_scl", + "bsc2_sda", + "classgpwr", + "clk_cx8", + "clkout_0", + "clkout_1", + "clkout_2", + "clkout_3", + "clkreq_in_0", + "clkreq_in_1", + "cws_sys_req1", + "cws_sys_req2", + "cws_sys_req3", + "digmic1_clk", + "digmic1_dq", + "digmic2_clk", + "digmic2_dq", + "gpen13", + "gpen14", + "gpen15", + "gpio00", + "gpio01", + "gpio02", + "gpio03", + "gpio04", + "gpio05", + "gpio06", + "gpio07", + "gpio08", + "gpio09", + "gpio10", + "gpio11", + "gpio12", + "gpio13", + "gpio14", + "gps_pablank", + "gps_tmark", + "hdmi_scl", + "hdmi_sda", + "ic_dm", + "ic_dp", + "kp_col_ip_0", + "kp_col_ip_1", + "kp_col_ip_2", + "kp_col_ip_3", + "kp_row_op_0", + "kp_row_op_1", + "kp_row_op_2", + "kp_row_op_3", + "lcd_b_0", + "lcd_b_1", + "lcd_b_2", + "lcd_b_3", + "lcd_b_4", + "lcd_b_5", + "lcd_b_6", + "lcd_b_7", + "lcd_g_0", + "lcd_g_1", + "lcd_g_2", + "lcd_g_3", + "lcd_g_4", + "lcd_g_5", + "lcd_g_6", + "lcd_g_7", + "lcd_hsync", + "lcd_oe", + "lcd_pclk", + "lcd_r_0", + "lcd_r_1", + "lcd_r_2", + "lcd_r_3", + "lcd_r_4", + "lcd_r_5", + "lcd_r_6", + "lcd_r_7", + "lcd_vsync", + "mdmgpio0", + "mdmgpio1", + "mdmgpio2", + "mdmgpio3", + "mdmgpio4", + "mdmgpio5", + "mdmgpio6", + "mdmgpio7", + "mdmgpio8", + "mphi_data_0", + "mphi_data_1", + "mphi_data_2", + "mphi_data_3", + "mphi_data_4", + "mphi_data_5", + "mphi_data_6", + "mphi_data_7", + "mphi_data_8", + "mphi_data_9", + "mphi_data_10", + "mphi_data_11", + "mphi_data_12", + "mphi_data_13", + "mphi_data_14", + "mphi_data_15", + "mphi_ha0", + "mphi_hat0", + "mphi_hat1", + "mphi_hce0_n", + "mphi_hce1_n", + "mphi_hrd_n", + "mphi_hwr_n", + "mphi_run0", + "mphi_run1", + "mtx_scan_clk", + "mtx_scan_data", + "nand_ad_0", + "nand_ad_1", + "nand_ad_2", + "nand_ad_3", + "nand_ad_4", + "nand_ad_5", + "nand_ad_6", + "nand_ad_7", + "nand_ale", + "nand_cen_0", + "nand_cen_1", + "nand_cle", + "nand_oen", + "nand_rdy_0", + "nand_rdy_1", + "nand_wen", + "nand_wp", + "pc1", + "pc2", + "pmu_int", + "pmu_scl", + "pmu_sda", + "rfst2g_mtsloten3g", + "rgmii_0_rx_ctl", + "rgmii_0_rxc", + "rgmii_0_rxd_0", + "rgmii_0_rxd_1", + "rgmii_0_rxd_2", + "rgmii_0_rxd_3", + "rgmii_0_tx_ctl", + "rgmii_0_txc", + "rgmii_0_txd_0", + "rgmii_0_txd_1", + "rgmii_0_txd_2", + "rgmii_0_txd_3", + "rgmii_1_rx_ctl", + "rgmii_1_rxc", + "rgmii_1_rxd_0", + "rgmii_1_rxd_1", + "rgmii_1_rxd_2", + "rgmii_1_rxd_3", + "rgmii_1_tx_ctl", + "rgmii_1_txc", + "rgmii_1_txd_0", + "rgmii_1_txd_1", + "rgmii_1_txd_2", + "rgmii_1_txd_3", + "rgmii_gpio_0", + "rgmii_gpio_1", + "rgmii_gpio_2", + "rgmii_gpio_3", + "rtxdata2g_txdata3g1", + "rtxen2g_txdata3g2", + "rxdata3g0", + "rxdata3g1", + "rxdata3g2", + "sdio1_clk", + "sdio1_cmd", + "sdio1_data_0", + "sdio1_data_1", + "sdio1_data_2", + "sdio1_data_3", + "sdio4_clk", + "sdio4_cmd", + "sdio4_data_0", + "sdio4_data_1", + "sdio4_data_2", + "sdio4_data_3", + "sim_clk", + "sim_data", + "sim_det", + "sim_resetn", + "sim2_clk", + "sim2_data", + "sim2_det", + "sim2_resetn", + "sri_c", + "sri_d", + "sri_e", + "ssp_extclk", + "ssp0_clk", + "ssp0_fs", + "ssp0_rxd", + "ssp0_txd", + "ssp2_clk", + "ssp2_fs_0", + "ssp2_fs_1", + "ssp2_fs_2", + "ssp2_fs_3", + "ssp2_rxd_0", + "ssp2_rxd_1", + "ssp2_txd_0", + "ssp2_txd_1", + "ssp3_clk", + "ssp3_fs", + "ssp3_rxd", + "ssp3_txd", + "ssp4_clk", + "ssp4_fs", + "ssp4_rxd", + "ssp4_txd", + "ssp5_clk", + "ssp5_fs", + "ssp5_rxd", + "ssp5_txd", + "ssp6_clk", + "ssp6_fs", + "ssp6_rxd", + "ssp6_txd", + "stat_1", + "stat_2", + "sysclken", + "traceclk", + "tracedt00", + "tracedt01", + "tracedt02", + "tracedt03", + "tracedt04", + "tracedt05", + "tracedt06", + "tracedt07", + "tracedt08", + "tracedt09", + "tracedt10", + "tracedt11", + "tracedt12", + "tracedt13", + "tracedt14", + "tracedt15", + "txdata3g0", + "txpwrind", + "uartb1_ucts", + "uartb1_urts", + "uartb1_urxd", + "uartb1_utxd", + "uartb2_urxd", + "uartb2_utxd", + "uartb3_ucts", + "uartb3_urts", + "uartb3_urxd", + "uartb3_utxd", + "uartb4_ucts", + "uartb4_urts", + "uartb4_urxd", + "uartb4_utxd", + "vc_cam1_scl", + "vc_cam1_sda", + "vc_cam2_scl", + "vc_cam2_sda", + "vc_cam3_scl", + "vc_cam3_sda", +}; + +/* Every pin can implement all ALT1-ALT4 functions */ +#define BCM281XX_PIN_FUNCTION(fcn_name) \ +{ \ + .name = #fcn_name, \ + .groups = bcm281xx_alt_groups, \ + .ngroups = ARRAY_SIZE(bcm281xx_alt_groups), \ +} + +static const struct bcm281xx_pin_function bcm281xx_functions[] = { + BCM281XX_PIN_FUNCTION(alt1), + BCM281XX_PIN_FUNCTION(alt2), + BCM281XX_PIN_FUNCTION(alt3), + BCM281XX_PIN_FUNCTION(alt4), +}; + +static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = { + .pins = bcm281xx_pinctrl_pins, + .npins = ARRAY_SIZE(bcm281xx_pinctrl_pins), + .functions = bcm281xx_functions, + .nfunctions = ARRAY_SIZE(bcm281xx_functions), +}; + +static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev, + unsigned pin) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + if (pin >= pdata->npins) + return BCM281XX_PIN_TYPE_UNKNOWN; + + return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data); +} + +#define BCM281XX_PIN_SHIFT(type, param) \ + (BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT) + +#define BCM281XX_PIN_MASK(type, param) \ + (BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK) + +/* + * This helper function is used to build up the value and mask used to write to + * a pin register, but does not actually write to the register. + */ +static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask, + u32 param_val, u32 param_shift, + u32 param_mask) +{ + *reg_val &= ~param_mask; + *reg_val |= (param_val << param_shift) & param_mask; + *reg_mask |= param_mask; +} + +static struct regmap_config bcm281xx_pinctrl_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = BCM281XX_PIN_VC_CAM3_SDA, +}; + +static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + return pdata->npins; +} + +static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + return pdata->pins[group].name; +} + +static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned group, + const unsigned **pins, + unsigned *num_pins) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + *pins = &pdata->pins[group].number; + *num_pins = 1; + + return 0; +} + +static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} + +static struct pinctrl_ops bcm281xx_pinctrl_ops = { + .get_groups_count = bcm281xx_pinctrl_get_groups_count, + .get_group_name = bcm281xx_pinctrl_get_group_name, + .get_group_pins = bcm281xx_pinctrl_get_group_pins, + .pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinctrl_utils_dt_free_map, +}; + +static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + return pdata->nfunctions; +} + +static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + return pdata->functions[function].name; +} + +static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + + *groups = pdata->functions[function].groups; + *num_groups = pdata->functions[function].ngroups; + + return 0; +} + +static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev, + unsigned function, + unsigned group) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + const struct bcm281xx_pin_function *f = &pdata->functions[function]; + u32 offset = 4 * pdata->pins[group].number; + int rc = 0; + + dev_dbg(pctldev->dev, + "%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n", + __func__, f->name, function, pdata->pins[group].name, + pdata->pins[group].number, offset); + + rc = regmap_update_bits(pdata->regmap, offset, + BCM281XX_PIN_REG_F_SEL_MASK, + function << BCM281XX_PIN_REG_F_SEL_SHIFT); + if (rc) + dev_err(pctldev->dev, + "Error updating register for pin %s (%d).\n", + pdata->pins[group].name, pdata->pins[group].number); + + return rc; +} + +static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = { + .get_functions_count = bcm281xx_pinctrl_get_fcns_count, + .get_function_name = bcm281xx_pinctrl_get_fcn_name, + .get_function_groups = bcm281xx_pinctrl_get_fcn_groups, + .set_mux = bcm281xx_pinmux_set, +}; + +static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + return -ENOTSUPP; +} + + +/* Goes through the configs and update register val/mask */ +static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs, + unsigned num_configs, + u32 *val, + u32 *mask) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + int i; + enum pin_config_param param; + u16 arg; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + arg = (arg >= 1 ? 1 : 0); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(STD, HYST), + BCM281XX_PIN_MASK(STD, HYST)); + break; + /* + * The pin bias can only be one of pull-up, pull-down, or + * disable. The user does not need to specify a value for the + * property, and the default value from pinconf-generic is + * ignored. + */ + case PIN_CONFIG_BIAS_DISABLE: + bcm281xx_pin_update(val, mask, 0, + BCM281XX_PIN_SHIFT(STD, PULL_UP), + BCM281XX_PIN_MASK(STD, PULL_UP)); + bcm281xx_pin_update(val, mask, 0, + BCM281XX_PIN_SHIFT(STD, PULL_DN), + BCM281XX_PIN_MASK(STD, PULL_DN)); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + bcm281xx_pin_update(val, mask, 1, + BCM281XX_PIN_SHIFT(STD, PULL_UP), + BCM281XX_PIN_MASK(STD, PULL_UP)); + bcm281xx_pin_update(val, mask, 0, + BCM281XX_PIN_SHIFT(STD, PULL_DN), + BCM281XX_PIN_MASK(STD, PULL_DN)); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + bcm281xx_pin_update(val, mask, 0, + BCM281XX_PIN_SHIFT(STD, PULL_UP), + BCM281XX_PIN_MASK(STD, PULL_UP)); + bcm281xx_pin_update(val, mask, 1, + BCM281XX_PIN_SHIFT(STD, PULL_DN), + BCM281XX_PIN_MASK(STD, PULL_DN)); + break; + + case PIN_CONFIG_SLEW_RATE: + arg = (arg >= 1 ? 1 : 0); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(STD, SLEW), + BCM281XX_PIN_MASK(STD, SLEW)); + break; + + case PIN_CONFIG_INPUT_ENABLE: + /* inversed since register is for input _disable_ */ + arg = (arg >= 1 ? 0 : 1); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(STD, INPUT_DIS), + BCM281XX_PIN_MASK(STD, INPUT_DIS)); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + /* Valid range is 2-16 mA, even numbers only */ + if ((arg < 2) || (arg > 16) || (arg % 2)) { + dev_err(pctldev->dev, + "Invalid Drive Strength value (%d) for " + "pin %s (%d). Valid values are " + "(2..16) mA, even numbers only.\n", + arg, pdata->pins[pin].name, pin); + return -EINVAL; + } + bcm281xx_pin_update(val, mask, (arg/2)-1, + BCM281XX_PIN_SHIFT(STD, DRV_STR), + BCM281XX_PIN_MASK(STD, DRV_STR)); + break; + + default: + dev_err(pctldev->dev, + "Unrecognized pin config %d for pin %s (%d).\n", + param, pdata->pins[pin].name, pin); + return -EINVAL; + + } /* switch config */ + } /* for each config */ + + return 0; +} + +/* + * The pull-up strength for an I2C pin is represented by bits 4-6 in the + * register with the following mapping: + * 0b000: No pull-up + * 0b001: 1200 Ohm + * 0b010: 1800 Ohm + * 0b011: 720 Ohm + * 0b100: 2700 Ohm + * 0b101: 831 Ohm + * 0b110: 1080 Ohm + * 0b111: 568 Ohm + * This array maps pull-up strength in Ohms to register values (1+index). + */ +static const u16 bcm281xx_pullup_map[] = { + 1200, 1800, 720, 2700, 831, 1080, 568 +}; + +/* Goes through the configs and update register val/mask */ +static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs, + unsigned num_configs, + u32 *val, + u32 *mask) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + int i, j; + enum pin_config_param param; + u16 arg; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_PULL_UP: + for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++) + if (bcm281xx_pullup_map[j] == arg) + break; + + if (j == ARRAY_SIZE(bcm281xx_pullup_map)) { + dev_err(pctldev->dev, + "Invalid pull-up value (%d) for pin %s " + "(%d). Valid values are 568, 720, 831, " + "1080, 1200, 1800, 2700 Ohms.\n", + arg, pdata->pins[pin].name, pin); + return -EINVAL; + } + + bcm281xx_pin_update(val, mask, j+1, + BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR), + BCM281XX_PIN_MASK(I2C, PULL_UP_STR)); + break; + + case PIN_CONFIG_BIAS_DISABLE: + bcm281xx_pin_update(val, mask, 0, + BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR), + BCM281XX_PIN_MASK(I2C, PULL_UP_STR)); + break; + + case PIN_CONFIG_SLEW_RATE: + arg = (arg >= 1 ? 1 : 0); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(I2C, SLEW), + BCM281XX_PIN_MASK(I2C, SLEW)); + break; + + case PIN_CONFIG_INPUT_ENABLE: + /* inversed since register is for input _disable_ */ + arg = (arg >= 1 ? 0 : 1); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(I2C, INPUT_DIS), + BCM281XX_PIN_MASK(I2C, INPUT_DIS)); + break; + + default: + dev_err(pctldev->dev, + "Unrecognized pin config %d for pin %s (%d).\n", + param, pdata->pins[pin].name, pin); + return -EINVAL; + + } /* switch config */ + } /* for each config */ + + return 0; +} + +/* Goes through the configs and update register val/mask */ +static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs, + unsigned num_configs, + u32 *val, + u32 *mask) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + int i; + enum pin_config_param param; + u16 arg; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_SLEW_RATE: + arg = (arg >= 1 ? 1 : 0); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(HDMI, MODE), + BCM281XX_PIN_MASK(HDMI, MODE)); + break; + + case PIN_CONFIG_INPUT_ENABLE: + /* inversed since register is for input _disable_ */ + arg = (arg >= 1 ? 0 : 1); + bcm281xx_pin_update(val, mask, arg, + BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS), + BCM281XX_PIN_MASK(HDMI, INPUT_DIS)); + break; + + default: + dev_err(pctldev->dev, + "Unrecognized pin config %d for pin %s (%d).\n", + param, pdata->pins[pin].name, pin); + return -EINVAL; + + } /* switch config */ + } /* for each config */ + + return 0; +} + +static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs, + unsigned num_configs) +{ + struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); + enum bcm281xx_pin_type pin_type; + u32 offset = 4 * pin; + u32 cfg_val, cfg_mask; + int rc; + + cfg_val = 0; + cfg_mask = 0; + pin_type = pin_type_get(pctldev, pin); + + /* Different pins have different configuration options */ + switch (pin_type) { + case BCM281XX_PIN_TYPE_STD: + rc = bcm281xx_std_pin_update(pctldev, pin, configs, + num_configs, &cfg_val, &cfg_mask); + break; + + case BCM281XX_PIN_TYPE_I2C: + rc = bcm281xx_i2c_pin_update(pctldev, pin, configs, + num_configs, &cfg_val, &cfg_mask); + break; + + case BCM281XX_PIN_TYPE_HDMI: + rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs, + num_configs, &cfg_val, &cfg_mask); + break; + + default: + dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n", + pdata->pins[pin].name, pin); + return -EINVAL; + + } /* switch pin type */ + + if (rc) + return rc; + + dev_dbg(pctldev->dev, + "%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n", + __func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask); + + rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val); + if (rc) { + dev_err(pctldev->dev, + "Error updating register for pin %s (%d).\n", + pdata->pins[pin].name, pin); + return rc; + } + + return 0; +} + +static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = { + .pin_config_get = bcm281xx_pinctrl_pin_config_get, + .pin_config_set = bcm281xx_pinctrl_pin_config_set, +}; + +static struct pinctrl_desc bcm281xx_pinctrl_desc = { + /* name, pins, npins members initialized in probe function */ + .pctlops = &bcm281xx_pinctrl_ops, + .pmxops = &bcm281xx_pinctrl_pinmux_ops, + .confops = &bcm281xx_pinctrl_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev) +{ + struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl; + struct resource *res; + struct pinctrl_dev *pctl; + + /* So far We can assume there is only 1 bank of registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pdata->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pdata->reg_base)) { + dev_err(&pdev->dev, "Failed to ioremap MEM resource\n"); + return -ENODEV; + } + + /* Initialize the dynamic part of pinctrl_desc */ + pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base, + &bcm281xx_pinctrl_regmap_config); + if (IS_ERR(pdata->regmap)) { + dev_err(&pdev->dev, "Regmap MMIO init failed.\n"); + return -ENODEV; + } + + bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev); + bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins; + bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins; + + pctl = pinctrl_register(&bcm281xx_pinctrl_desc, + &pdev->dev, + pdata); + if (!pctl) { + dev_err(&pdev->dev, "Failed to register pinctrl\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, pdata); + + return 0; +} + +static struct of_device_id bcm281xx_pinctrl_of_match[] = { + { .compatible = "brcm,bcm11351-pinctrl", }, + { }, +}; + +static struct platform_driver bcm281xx_pinctrl_driver = { + .driver = { + .name = "bcm281xx-pinctrl", + .of_match_table = bcm281xx_pinctrl_of_match, + }, +}; + +module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe); + +MODULE_AUTHOR("Broadcom Corporation "); +MODULE_AUTHOR("Sherman Yin "); +MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c new file mode 100644 index 0000000..9aa8a3f --- /dev/null +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -0,0 +1,1072 @@ +/* + * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO) + * + * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren + * + * This driver is inspired by: + * pinctrl-nomadik.c, please see original file for copyright information + * pinctrl-tegra.c, please see original file for copyright information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MODULE_NAME "pinctrl-bcm2835" +#define BCM2835_NUM_GPIOS 54 +#define BCM2835_NUM_BANKS 2 + +#define BCM2835_PIN_BITMAP_SZ \ + DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8) + +/* GPIO register offsets */ +#define GPFSEL0 0x0 /* Function Select */ +#define GPSET0 0x1c /* Pin Output Set */ +#define GPCLR0 0x28 /* Pin Output Clear */ +#define GPLEV0 0x34 /* Pin Level */ +#define GPEDS0 0x40 /* Pin Event Detect Status */ +#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */ +#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */ +#define GPHEN0 0x64 /* Pin High Detect Enable */ +#define GPLEN0 0x70 /* Pin Low Detect Enable */ +#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */ +#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */ +#define GPPUD 0x94 /* Pin Pull-up/down Enable */ +#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */ + +#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4)) +#define FSEL_SHIFT(p) (((p) % 10) * 3) +#define GPIO_REG_OFFSET(p) ((p) / 32) +#define GPIO_REG_SHIFT(p) ((p) % 32) + +enum bcm2835_pinconf_param { + /* argument: bcm2835_pinconf_pull */ + BCM2835_PINCONF_PARAM_PULL, +}; + +enum bcm2835_pinconf_pull { + BCM2835_PINCONFIG_PULL_NONE, + BCM2835_PINCONFIG_PULL_DOWN, + BCM2835_PINCONFIG_PULL_UP, +}; + +#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) +#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) +#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) + +struct bcm2835_gpio_irqdata { + struct bcm2835_pinctrl *pc; + int bank; +}; + +struct bcm2835_pinctrl { + struct device *dev; + void __iomem *base; + int irq[BCM2835_NUM_BANKS]; + + /* note: locking assumes each bank will have its own unsigned long */ + unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; + unsigned int irq_type[BCM2835_NUM_GPIOS]; + + struct pinctrl_dev *pctl_dev; + struct irq_domain *irq_domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; + + struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS]; + spinlock_t irq_lock[BCM2835_NUM_BANKS]; +}; + +static struct lock_class_key gpio_lock_class; + +/* pins are just named GPIO0..GPIO53 */ +#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a) +static struct pinctrl_pin_desc bcm2835_gpio_pins[] = { + BCM2835_GPIO_PIN(0), + BCM2835_GPIO_PIN(1), + BCM2835_GPIO_PIN(2), + BCM2835_GPIO_PIN(3), + BCM2835_GPIO_PIN(4), + BCM2835_GPIO_PIN(5), + BCM2835_GPIO_PIN(6), + BCM2835_GPIO_PIN(7), + BCM2835_GPIO_PIN(8), + BCM2835_GPIO_PIN(9), + BCM2835_GPIO_PIN(10), + BCM2835_GPIO_PIN(11), + BCM2835_GPIO_PIN(12), + BCM2835_GPIO_PIN(13), + BCM2835_GPIO_PIN(14), + BCM2835_GPIO_PIN(15), + BCM2835_GPIO_PIN(16), + BCM2835_GPIO_PIN(17), + BCM2835_GPIO_PIN(18), + BCM2835_GPIO_PIN(19), + BCM2835_GPIO_PIN(20), + BCM2835_GPIO_PIN(21), + BCM2835_GPIO_PIN(22), + BCM2835_GPIO_PIN(23), + BCM2835_GPIO_PIN(24), + BCM2835_GPIO_PIN(25), + BCM2835_GPIO_PIN(26), + BCM2835_GPIO_PIN(27), + BCM2835_GPIO_PIN(28), + BCM2835_GPIO_PIN(29), + BCM2835_GPIO_PIN(30), + BCM2835_GPIO_PIN(31), + BCM2835_GPIO_PIN(32), + BCM2835_GPIO_PIN(33), + BCM2835_GPIO_PIN(34), + BCM2835_GPIO_PIN(35), + BCM2835_GPIO_PIN(36), + BCM2835_GPIO_PIN(37), + BCM2835_GPIO_PIN(38), + BCM2835_GPIO_PIN(39), + BCM2835_GPIO_PIN(40), + BCM2835_GPIO_PIN(41), + BCM2835_GPIO_PIN(42), + BCM2835_GPIO_PIN(43), + BCM2835_GPIO_PIN(44), + BCM2835_GPIO_PIN(45), + BCM2835_GPIO_PIN(46), + BCM2835_GPIO_PIN(47), + BCM2835_GPIO_PIN(48), + BCM2835_GPIO_PIN(49), + BCM2835_GPIO_PIN(50), + BCM2835_GPIO_PIN(51), + BCM2835_GPIO_PIN(52), + BCM2835_GPIO_PIN(53), +}; + +/* one pin per group */ +static const char * const bcm2835_gpio_groups[] = { + "gpio0", + "gpio1", + "gpio2", + "gpio3", + "gpio4", + "gpio5", + "gpio6", + "gpio7", + "gpio8", + "gpio9", + "gpio10", + "gpio11", + "gpio12", + "gpio13", + "gpio14", + "gpio15", + "gpio16", + "gpio17", + "gpio18", + "gpio19", + "gpio20", + "gpio21", + "gpio22", + "gpio23", + "gpio24", + "gpio25", + "gpio26", + "gpio27", + "gpio28", + "gpio29", + "gpio30", + "gpio31", + "gpio32", + "gpio33", + "gpio34", + "gpio35", + "gpio36", + "gpio37", + "gpio38", + "gpio39", + "gpio40", + "gpio41", + "gpio42", + "gpio43", + "gpio44", + "gpio45", + "gpio46", + "gpio47", + "gpio48", + "gpio49", + "gpio50", + "gpio51", + "gpio52", + "gpio53", +}; + +enum bcm2835_fsel { + BCM2835_FSEL_GPIO_IN = 0, + BCM2835_FSEL_GPIO_OUT = 1, + BCM2835_FSEL_ALT0 = 4, + BCM2835_FSEL_ALT1 = 5, + BCM2835_FSEL_ALT2 = 6, + BCM2835_FSEL_ALT3 = 7, + BCM2835_FSEL_ALT4 = 3, + BCM2835_FSEL_ALT5 = 2, + BCM2835_FSEL_COUNT = 8, + BCM2835_FSEL_MASK = 0x7, +}; + +static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = { + [BCM2835_FSEL_GPIO_IN] = "gpio_in", + [BCM2835_FSEL_GPIO_OUT] = "gpio_out", + [BCM2835_FSEL_ALT0] = "alt0", + [BCM2835_FSEL_ALT1] = "alt1", + [BCM2835_FSEL_ALT2] = "alt2", + [BCM2835_FSEL_ALT3] = "alt3", + [BCM2835_FSEL_ALT4] = "alt4", + [BCM2835_FSEL_ALT5] = "alt5", +}; + +static const char * const irq_type_names[] = { + [IRQ_TYPE_NONE] = "none", + [IRQ_TYPE_EDGE_RISING] = "edge-rising", + [IRQ_TYPE_EDGE_FALLING] = "edge-falling", + [IRQ_TYPE_EDGE_BOTH] = "edge-both", + [IRQ_TYPE_LEVEL_HIGH] = "level-high", + [IRQ_TYPE_LEVEL_LOW] = "level-low", +}; + +static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg) +{ + return readl(pc->base + reg); +} + +static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg, + u32 val) +{ + writel(val, pc->base + reg); +} + +static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg, + unsigned bit) +{ + reg += GPIO_REG_OFFSET(bit) * 4; + return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1; +} + +/* note NOT a read/modify/write cycle */ +static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc, + unsigned reg, unsigned bit) +{ + reg += GPIO_REG_OFFSET(bit) * 4; + bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit))); +} + +static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get( + struct bcm2835_pinctrl *pc, unsigned pin) +{ + u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin)); + enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK; + + dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin, + bcm2835_functions[status]); + + return status; +} + +static inline void bcm2835_pinctrl_fsel_set( + struct bcm2835_pinctrl *pc, unsigned pin, + enum bcm2835_fsel fsel) +{ + u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin)); + enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK; + + dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin, + bcm2835_functions[cur]); + + if (cur == fsel) + return; + + if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) { + /* always transition through GPIO_IN */ + val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin)); + val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin); + + dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin, + bcm2835_functions[BCM2835_FSEL_GPIO_IN]); + bcm2835_gpio_wr(pc, FSEL_REG(pin), val); + } + + val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin)); + val |= fsel << FSEL_SHIFT(pin); + + dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin, + bcm2835_functions[fsel]); + bcm2835_gpio_wr(pc, FSEL_REG(pin), val); +} + +static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); +} + +static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_gpio_direction_input(chip->base + offset); +} + +static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); + + return bcm2835_gpio_get_bit(pc, GPLEV0, offset); +} + +static int bcm2835_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return pinctrl_gpio_direction_output(chip->base + offset); +} + +static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); + + bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset); +} + +static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); + + return irq_linear_revmap(pc->irq_domain, offset); +} + +static struct gpio_chip bcm2835_gpio_chip = { + .label = MODULE_NAME, + .owner = THIS_MODULE, + .request = bcm2835_gpio_request, + .free = bcm2835_gpio_free, + .direction_input = bcm2835_gpio_direction_input, + .direction_output = bcm2835_gpio_direction_output, + .get = bcm2835_gpio_get, + .set = bcm2835_gpio_set, + .to_irq = bcm2835_gpio_to_irq, + .base = -1, + .ngpio = BCM2835_NUM_GPIOS, + .can_sleep = false, +}; + +static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) +{ + struct bcm2835_gpio_irqdata *irqdata = dev_id; + struct bcm2835_pinctrl *pc = irqdata->pc; + int bank = irqdata->bank; + unsigned long events; + unsigned offset; + unsigned gpio; + unsigned int type; + + events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); + events &= pc->enabled_irq_map[bank]; + for_each_set_bit(offset, &events, 32) { + gpio = (32 * bank) + offset; + type = pc->irq_type[gpio]; + + /* ack edge triggered IRQs immediately */ + if (!(type & IRQ_TYPE_LEVEL_MASK)) + bcm2835_gpio_set_bit(pc, GPEDS0, gpio); + + generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); + + /* ack level triggered IRQ after handling them */ + if (type & IRQ_TYPE_LEVEL_MASK) + bcm2835_gpio_set_bit(pc, GPEDS0, gpio); + } + return events ? IRQ_HANDLED : IRQ_NONE; +} + +static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, + unsigned reg, unsigned offset, bool enable) +{ + u32 value; + reg += GPIO_REG_OFFSET(offset) * 4; + value = bcm2835_gpio_rd(pc, reg); + if (enable) + value |= BIT(GPIO_REG_SHIFT(offset)); + else + value &= ~(BIT(GPIO_REG_SHIFT(offset))); + bcm2835_gpio_wr(pc, reg, value); +} + +/* fast path for IRQ handler */ +static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, + unsigned offset, bool enable) +{ + switch (pc->irq_type[offset]) { + case IRQ_TYPE_EDGE_RISING: + __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable); + break; + + case IRQ_TYPE_EDGE_FALLING: + __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable); + break; + + case IRQ_TYPE_EDGE_BOTH: + __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable); + __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable); + break; + + case IRQ_TYPE_LEVEL_HIGH: + __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable); + break; + + case IRQ_TYPE_LEVEL_LOW: + __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable); + break; + } +} + +static void bcm2835_gpio_irq_enable(struct irq_data *data) +{ + struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); + unsigned gpio = irqd_to_hwirq(data); + unsigned offset = GPIO_REG_SHIFT(gpio); + unsigned bank = GPIO_REG_OFFSET(gpio); + unsigned long flags; + + spin_lock_irqsave(&pc->irq_lock[bank], flags); + set_bit(offset, &pc->enabled_irq_map[bank]); + bcm2835_gpio_irq_config(pc, gpio, true); + spin_unlock_irqrestore(&pc->irq_lock[bank], flags); +} + +static void bcm2835_gpio_irq_disable(struct irq_data *data) +{ + struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); + unsigned gpio = irqd_to_hwirq(data); + unsigned offset = GPIO_REG_SHIFT(gpio); + unsigned bank = GPIO_REG_OFFSET(gpio); + unsigned long flags; + + spin_lock_irqsave(&pc->irq_lock[bank], flags); + bcm2835_gpio_irq_config(pc, gpio, false); + clear_bit(offset, &pc->enabled_irq_map[bank]); + spin_unlock_irqrestore(&pc->irq_lock[bank], flags); +} + +static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc, + unsigned offset, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_NONE: + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_LEVEL_LOW: + pc->irq_type[offset] = type; + break; + + default: + return -EINVAL; + } + return 0; +} + +/* slower path for reconfiguring IRQ type */ +static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc, + unsigned offset, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_NONE: + if (pc->irq_type[offset] != type) { + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + } + break; + + case IRQ_TYPE_EDGE_RISING: + if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) { + /* RISING already enabled, disable FALLING */ + pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING; + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + } else if (pc->irq_type[offset] != type) { + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + bcm2835_gpio_irq_config(pc, offset, true); + } + break; + + case IRQ_TYPE_EDGE_FALLING: + if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) { + /* FALLING already enabled, disable RISING */ + pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING; + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + } else if (pc->irq_type[offset] != type) { + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + bcm2835_gpio_irq_config(pc, offset, true); + } + break; + + case IRQ_TYPE_EDGE_BOTH: + if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) { + /* RISING already enabled, enable FALLING too */ + pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING; + bcm2835_gpio_irq_config(pc, offset, true); + pc->irq_type[offset] = type; + } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) { + /* FALLING already enabled, enable RISING too */ + pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING; + bcm2835_gpio_irq_config(pc, offset, true); + pc->irq_type[offset] = type; + } else if (pc->irq_type[offset] != type) { + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + bcm2835_gpio_irq_config(pc, offset, true); + } + break; + + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_LEVEL_LOW: + if (pc->irq_type[offset] != type) { + bcm2835_gpio_irq_config(pc, offset, false); + pc->irq_type[offset] = type; + bcm2835_gpio_irq_config(pc, offset, true); + } + break; + + default: + return -EINVAL; + } + return 0; +} + +static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); + unsigned gpio = irqd_to_hwirq(data); + unsigned offset = GPIO_REG_SHIFT(gpio); + unsigned bank = GPIO_REG_OFFSET(gpio); + unsigned long flags; + int ret; + + spin_lock_irqsave(&pc->irq_lock[bank], flags); + + if (test_bit(offset, &pc->enabled_irq_map[bank])) + ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type); + else + ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type); + + spin_unlock_irqrestore(&pc->irq_lock[bank], flags); + + return ret; +} + +static struct irq_chip bcm2835_gpio_irq_chip = { + .name = MODULE_NAME, + .irq_enable = bcm2835_gpio_irq_enable, + .irq_disable = bcm2835_gpio_irq_disable, + .irq_set_type = bcm2835_gpio_irq_set_type, +}; + +static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm2835_gpio_groups); +} + +static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return bcm2835_gpio_groups[selector]; +} + +static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + *pins = &bcm2835_gpio_pins[selector].number; + *num_pins = 1; + + return 0; +} + +static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned offset) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset); + const char *fname = bcm2835_functions[fsel]; + int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset); + int irq = irq_find_mapping(pc->irq_domain, offset); + + seq_printf(s, "function %s in %s; irq %d (%s)", + fname, value ? "hi" : "lo", + irq, irq_type_names[pc->irq_type[offset]]); +} + +static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *maps, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(maps[i].data.configs.configs); + + kfree(maps); +} + +static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc, + struct device_node *np, u32 pin, u32 fnum, + struct pinctrl_map **maps) +{ + struct pinctrl_map *map = *maps; + + if (fnum >= ARRAY_SIZE(bcm2835_functions)) { + dev_err(pc->dev, "%s: invalid brcm,function %d\n", + of_node_full_name(np), fnum); + return -EINVAL; + } + + map->type = PIN_MAP_TYPE_MUX_GROUP; + map->data.mux.group = bcm2835_gpio_groups[pin]; + map->data.mux.function = bcm2835_functions[fnum]; + (*maps)++; + + return 0; +} + +static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, + struct device_node *np, u32 pin, u32 pull, + struct pinctrl_map **maps) +{ + struct pinctrl_map *map = *maps; + unsigned long *configs; + + if (pull > 2) { + dev_err(pc->dev, "%s: invalid brcm,pull %d\n", + of_node_full_name(np), pull); + return -EINVAL; + } + + configs = kzalloc(sizeof(*configs), GFP_KERNEL); + if (!configs) + return -ENOMEM; + configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull); + + map->type = PIN_MAP_TYPE_CONFIGS_PIN; + map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name; + map->data.configs.configs = configs; + map->data.configs.num_configs = 1; + (*maps)++; + + return 0; +} + +static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + struct property *pins, *funcs, *pulls; + int num_pins, num_funcs, num_pulls, maps_per_pin; + struct pinctrl_map *maps, *cur_map; + int i, err; + u32 pin, func, pull; + + pins = of_find_property(np, "brcm,pins", NULL); + if (!pins) { + dev_err(pc->dev, "%s: missing brcm,pins property\n", + of_node_full_name(np)); + return -EINVAL; + } + + funcs = of_find_property(np, "brcm,function", NULL); + pulls = of_find_property(np, "brcm,pull", NULL); + + if (!funcs && !pulls) { + dev_err(pc->dev, + "%s: neither brcm,function nor brcm,pull specified\n", + of_node_full_name(np)); + return -EINVAL; + } + + num_pins = pins->length / 4; + num_funcs = funcs ? (funcs->length / 4) : 0; + num_pulls = pulls ? (pulls->length / 4) : 0; + + if (num_funcs > 1 && num_funcs != num_pins) { + dev_err(pc->dev, + "%s: brcm,function must have 1 or %d entries\n", + of_node_full_name(np), num_pins); + return -EINVAL; + } + + if (num_pulls > 1 && num_pulls != num_pins) { + dev_err(pc->dev, + "%s: brcm,pull must have 1 or %d entries\n", + of_node_full_name(np), num_pins); + return -EINVAL; + } + + maps_per_pin = 0; + if (num_funcs) + maps_per_pin++; + if (num_pulls) + maps_per_pin++; + cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps), + GFP_KERNEL); + if (!maps) + return -ENOMEM; + + for (i = 0; i < num_pins; i++) { + err = of_property_read_u32_index(np, "brcm,pins", i, &pin); + if (err) + goto out; + if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) { + dev_err(pc->dev, "%s: invalid brcm,pins value %d\n", + of_node_full_name(np), pin); + err = -EINVAL; + goto out; + } + + if (num_funcs) { + err = of_property_read_u32_index(np, "brcm,function", + (num_funcs > 1) ? i : 0, &func); + if (err) + goto out; + err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin, + func, &cur_map); + if (err) + goto out; + } + if (num_pulls) { + err = of_property_read_u32_index(np, "brcm,pull", + (num_funcs > 1) ? i : 0, &pull); + if (err) + goto out; + err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin, + pull, &cur_map); + if (err) + goto out; + } + } + + *map = maps; + *num_maps = num_pins * maps_per_pin; + + return 0; + +out: + kfree(maps); + return err; +} + +static const struct pinctrl_ops bcm2835_pctl_ops = { + .get_groups_count = bcm2835_pctl_get_groups_count, + .get_group_name = bcm2835_pctl_get_group_name, + .get_group_pins = bcm2835_pctl_get_group_pins, + .pin_dbg_show = bcm2835_pctl_pin_dbg_show, + .dt_node_to_map = bcm2835_pctl_dt_node_to_map, + .dt_free_map = bcm2835_pctl_dt_free_map, +}; + +static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev) +{ + return BCM2835_FSEL_COUNT; +} + +static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return bcm2835_functions[selector]; +} + +static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + /* every pin can do every function */ + *groups = bcm2835_gpio_groups; + *num_groups = ARRAY_SIZE(bcm2835_gpio_groups); + + return 0; +} + +static int bcm2835_pmx_set(struct pinctrl_dev *pctldev, + unsigned func_selector, + unsigned group_selector) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + + bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector); + + return 0; +} + +static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + + /* disable by setting to GPIO_IN */ + bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN); +} + +static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset, + bool input) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + enum bcm2835_fsel fsel = input ? + BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT; + + bcm2835_pinctrl_fsel_set(pc, offset, fsel); + + return 0; +} + +static const struct pinmux_ops bcm2835_pmx_ops = { + .get_functions_count = bcm2835_pmx_get_functions_count, + .get_function_name = bcm2835_pmx_get_function_name, + .get_function_groups = bcm2835_pmx_get_function_groups, + .set_mux = bcm2835_pmx_set, + .gpio_disable_free = bcm2835_pmx_gpio_disable_free, + .gpio_set_direction = bcm2835_pmx_gpio_set_direction, +}; + +static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin, unsigned long *config) +{ + /* No way to read back config in HW */ + return -ENOTSUPP; +} + +static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin, unsigned long *configs, + unsigned num_configs) +{ + struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + enum bcm2835_pinconf_param param; + u16 arg; + u32 off, bit; + int i; + + for (i = 0; i < num_configs; i++) { + param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]); + arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]); + + if (param != BCM2835_PINCONF_PARAM_PULL) + return -EINVAL; + + off = GPIO_REG_OFFSET(pin); + bit = GPIO_REG_SHIFT(pin); + + bcm2835_gpio_wr(pc, GPPUD, arg & 3); + /* + * Docs say to wait 150 cycles, but not of what. We assume a + * 1 MHz clock here, which is pretty slow... + */ + udelay(150); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); + udelay(150); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); + } /* for each config */ + + return 0; +} + +static const struct pinconf_ops bcm2835_pinconf_ops = { + .pin_config_get = bcm2835_pinconf_get, + .pin_config_set = bcm2835_pinconf_set, +}; + +static struct pinctrl_desc bcm2835_pinctrl_desc = { + .name = MODULE_NAME, + .pins = bcm2835_gpio_pins, + .npins = ARRAY_SIZE(bcm2835_gpio_pins), + .pctlops = &bcm2835_pctl_ops, + .pmxops = &bcm2835_pmx_ops, + .confops = &bcm2835_pinconf_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { + .name = MODULE_NAME, + .npins = BCM2835_NUM_GPIOS, +}; + +static int bcm2835_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct bcm2835_pinctrl *pc; + struct resource iomem; + int err, i; + BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS); + BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS); + + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + platform_set_drvdata(pdev, pc); + pc->dev = dev; + + err = of_address_to_resource(np, 0, &iomem); + if (err) { + dev_err(dev, "could not get IO memory\n"); + return err; + } + + pc->base = devm_ioremap_resource(dev, &iomem); + if (IS_ERR(pc->base)) + return PTR_ERR(pc->base); + + pc->gpio_chip = bcm2835_gpio_chip; + pc->gpio_chip.dev = dev; + pc->gpio_chip.of_node = np; + + pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS, + &irq_domain_simple_ops, NULL); + if (!pc->irq_domain) { + dev_err(dev, "could not create IRQ domain\n"); + return -ENOMEM; + } + + for (i = 0; i < BCM2835_NUM_GPIOS; i++) { + int irq = irq_create_mapping(pc->irq_domain, i); + irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip, + handle_simple_irq); + irq_set_chip_data(irq, pc); + set_irq_flags(irq, IRQF_VALID); + } + + for (i = 0; i < BCM2835_NUM_BANKS; i++) { + unsigned long events; + unsigned offset; + int len; + char *name; + + /* clear event detection flags */ + bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0); + bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0); + bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0); + bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0); + bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0); + bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0); + + /* clear all the events */ + events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4); + for_each_set_bit(offset, &events, 32) + bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset)); + + pc->irq[i] = irq_of_parse_and_map(np, i); + pc->irq_data[i].pc = pc; + pc->irq_data[i].bank = i; + spin_lock_init(&pc->irq_lock[i]); + + len = strlen(dev_name(pc->dev)) + 16; + name = devm_kzalloc(pc->dev, len, GFP_KERNEL); + if (!name) + return -ENOMEM; + snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i); + + err = devm_request_irq(dev, pc->irq[i], + bcm2835_gpio_irq_handler, IRQF_SHARED, + name, &pc->irq_data[i]); + if (err) { + dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]); + return err; + } + } + + err = gpiochip_add(&pc->gpio_chip); + if (err) { + dev_err(dev, "could not add GPIO chip\n"); + return err; + } + + pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc); + if (!pc->pctl_dev) { + gpiochip_remove(&pc->gpio_chip); + return -EINVAL; + } + + pc->gpio_range = bcm2835_pinctrl_gpio_range; + pc->gpio_range.base = pc->gpio_chip.base; + pc->gpio_range.gc = &pc->gpio_chip; + pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); + + return 0; +} + +static int bcm2835_pinctrl_remove(struct platform_device *pdev) +{ + struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev); + + pinctrl_unregister(pc->pctl_dev); + gpiochip_remove(&pc->gpio_chip); + + return 0; +} + +static struct of_device_id bcm2835_pinctrl_match[] = { + { .compatible = "brcm,bcm2835-gpio" }, + {} +}; +MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match); + +static struct platform_driver bcm2835_pinctrl_driver = { + .probe = bcm2835_pinctrl_probe, + .remove = bcm2835_pinctrl_remove, + .driver = { + .name = MODULE_NAME, + .of_match_table = bcm2835_pinctrl_match, + }, +}; +module_platform_driver(bcm2835_pinctrl_driver); + +MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren"); +MODULE_DESCRIPTION("BCM2835 Pin control driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/pinctrl-bcm281xx.c b/drivers/pinctrl/pinctrl-bcm281xx.c deleted file mode 100644 index fa2a00f..0000000 --- a/drivers/pinctrl/pinctrl-bcm281xx.c +++ /dev/null @@ -1,1455 +0,0 @@ -/* - * Copyright (C) 2013 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "core.h" -#include "pinctrl-utils.h" - -/* BCM281XX Pin Control Registers Definitions */ - -/* Function Select bits are the same for all pin control registers */ -#define BCM281XX_PIN_REG_F_SEL_MASK 0x0700 -#define BCM281XX_PIN_REG_F_SEL_SHIFT 8 - -/* Standard pin register */ -#define BCM281XX_STD_PIN_REG_DRV_STR_MASK 0x0007 -#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT 0 -#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK 0x0008 -#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT 3 -#define BCM281XX_STD_PIN_REG_SLEW_MASK 0x0010 -#define BCM281XX_STD_PIN_REG_SLEW_SHIFT 4 -#define BCM281XX_STD_PIN_REG_PULL_UP_MASK 0x0020 -#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT 5 -#define BCM281XX_STD_PIN_REG_PULL_DN_MASK 0x0040 -#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT 6 -#define BCM281XX_STD_PIN_REG_HYST_MASK 0x0080 -#define BCM281XX_STD_PIN_REG_HYST_SHIFT 7 - -/* I2C pin register */ -#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK 0x0004 -#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT 2 -#define BCM281XX_I2C_PIN_REG_SLEW_MASK 0x0008 -#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT 3 -#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK 0x0070 -#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT 4 - -/* HDMI pin register */ -#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK 0x0008 -#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT 3 -#define BCM281XX_HDMI_PIN_REG_MODE_MASK 0x0010 -#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT 4 - -/** - * bcm281xx_pin_type - types of pin register - */ -enum bcm281xx_pin_type { - BCM281XX_PIN_TYPE_UNKNOWN = 0, - BCM281XX_PIN_TYPE_STD, - BCM281XX_PIN_TYPE_I2C, - BCM281XX_PIN_TYPE_HDMI, -}; - -static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD; -static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C; -static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI; - -/** - * bcm281xx_pin_function- define pin function - */ -struct bcm281xx_pin_function { - const char *name; - const char * const *groups; - const unsigned ngroups; -}; - -/** - * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data - * @reg_base - base of pinctrl registers - */ -struct bcm281xx_pinctrl_data { - void __iomem *reg_base; - - /* List of all pins */ - const struct pinctrl_pin_desc *pins; - const unsigned npins; - - const struct bcm281xx_pin_function *functions; - const unsigned nfunctions; - - struct regmap *regmap; -}; - -/* - * Pin number definition. The order here must be the same as defined in the - * PADCTRLREG block in the RDB. - */ -#define BCM281XX_PIN_ADCSYNC 0 -#define BCM281XX_PIN_BAT_RM 1 -#define BCM281XX_PIN_BSC1_SCL 2 -#define BCM281XX_PIN_BSC1_SDA 3 -#define BCM281XX_PIN_BSC2_SCL 4 -#define BCM281XX_PIN_BSC2_SDA 5 -#define BCM281XX_PIN_CLASSGPWR 6 -#define BCM281XX_PIN_CLK_CX8 7 -#define BCM281XX_PIN_CLKOUT_0 8 -#define BCM281XX_PIN_CLKOUT_1 9 -#define BCM281XX_PIN_CLKOUT_2 10 -#define BCM281XX_PIN_CLKOUT_3 11 -#define BCM281XX_PIN_CLKREQ_IN_0 12 -#define BCM281XX_PIN_CLKREQ_IN_1 13 -#define BCM281XX_PIN_CWS_SYS_REQ1 14 -#define BCM281XX_PIN_CWS_SYS_REQ2 15 -#define BCM281XX_PIN_CWS_SYS_REQ3 16 -#define BCM281XX_PIN_DIGMIC1_CLK 17 -#define BCM281XX_PIN_DIGMIC1_DQ 18 -#define BCM281XX_PIN_DIGMIC2_CLK 19 -#define BCM281XX_PIN_DIGMIC2_DQ 20 -#define BCM281XX_PIN_GPEN13 21 -#define BCM281XX_PIN_GPEN14 22 -#define BCM281XX_PIN_GPEN15 23 -#define BCM281XX_PIN_GPIO00 24 -#define BCM281XX_PIN_GPIO01 25 -#define BCM281XX_PIN_GPIO02 26 -#define BCM281XX_PIN_GPIO03 27 -#define BCM281XX_PIN_GPIO04 28 -#define BCM281XX_PIN_GPIO05 29 -#define BCM281XX_PIN_GPIO06 30 -#define BCM281XX_PIN_GPIO07 31 -#define BCM281XX_PIN_GPIO08 32 -#define BCM281XX_PIN_GPIO09 33 -#define BCM281XX_PIN_GPIO10 34 -#define BCM281XX_PIN_GPIO11 35 -#define BCM281XX_PIN_GPIO12 36 -#define BCM281XX_PIN_GPIO13 37 -#define BCM281XX_PIN_GPIO14 38 -#define BCM281XX_PIN_GPS_PABLANK 39 -#define BCM281XX_PIN_GPS_TMARK 40 -#define BCM281XX_PIN_HDMI_SCL 41 -#define BCM281XX_PIN_HDMI_SDA 42 -#define BCM281XX_PIN_IC_DM 43 -#define BCM281XX_PIN_IC_DP 44 -#define BCM281XX_PIN_KP_COL_IP_0 45 -#define BCM281XX_PIN_KP_COL_IP_1 46 -#define BCM281XX_PIN_KP_COL_IP_2 47 -#define BCM281XX_PIN_KP_COL_IP_3 48 -#define BCM281XX_PIN_KP_ROW_OP_0 49 -#define BCM281XX_PIN_KP_ROW_OP_1 50 -#define BCM281XX_PIN_KP_ROW_OP_2 51 -#define BCM281XX_PIN_KP_ROW_OP_3 52 -#define BCM281XX_PIN_LCD_B_0 53 -#define BCM281XX_PIN_LCD_B_1 54 -#define BCM281XX_PIN_LCD_B_2 55 -#define BCM281XX_PIN_LCD_B_3 56 -#define BCM281XX_PIN_LCD_B_4 57 -#define BCM281XX_PIN_LCD_B_5 58 -#define BCM281XX_PIN_LCD_B_6 59 -#define BCM281XX_PIN_LCD_B_7 60 -#define BCM281XX_PIN_LCD_G_0 61 -#define BCM281XX_PIN_LCD_G_1 62 -#define BCM281XX_PIN_LCD_G_2 63 -#define BCM281XX_PIN_LCD_G_3 64 -#define BCM281XX_PIN_LCD_G_4 65 -#define BCM281XX_PIN_LCD_G_5 66 -#define BCM281XX_PIN_LCD_G_6 67 -#define BCM281XX_PIN_LCD_G_7 68 -#define BCM281XX_PIN_LCD_HSYNC 69 -#define BCM281XX_PIN_LCD_OE 70 -#define BCM281XX_PIN_LCD_PCLK 71 -#define BCM281XX_PIN_LCD_R_0 72 -#define BCM281XX_PIN_LCD_R_1 73 -#define BCM281XX_PIN_LCD_R_2 74 -#define BCM281XX_PIN_LCD_R_3 75 -#define BCM281XX_PIN_LCD_R_4 76 -#define BCM281XX_PIN_LCD_R_5 77 -#define BCM281XX_PIN_LCD_R_6 78 -#define BCM281XX_PIN_LCD_R_7 79 -#define BCM281XX_PIN_LCD_VSYNC 80 -#define BCM281XX_PIN_MDMGPIO0 81 -#define BCM281XX_PIN_MDMGPIO1 82 -#define BCM281XX_PIN_MDMGPIO2 83 -#define BCM281XX_PIN_MDMGPIO3 84 -#define BCM281XX_PIN_MDMGPIO4 85 -#define BCM281XX_PIN_MDMGPIO5 86 -#define BCM281XX_PIN_MDMGPIO6 87 -#define BCM281XX_PIN_MDMGPIO7 88 -#define BCM281XX_PIN_MDMGPIO8 89 -#define BCM281XX_PIN_MPHI_DATA_0 90 -#define BCM281XX_PIN_MPHI_DATA_1 91 -#define BCM281XX_PIN_MPHI_DATA_2 92 -#define BCM281XX_PIN_MPHI_DATA_3 93 -#define BCM281XX_PIN_MPHI_DATA_4 94 -#define BCM281XX_PIN_MPHI_DATA_5 95 -#define BCM281XX_PIN_MPHI_DATA_6 96 -#define BCM281XX_PIN_MPHI_DATA_7 97 -#define BCM281XX_PIN_MPHI_DATA_8 98 -#define BCM281XX_PIN_MPHI_DATA_9 99 -#define BCM281XX_PIN_MPHI_DATA_10 100 -#define BCM281XX_PIN_MPHI_DATA_11 101 -#define BCM281XX_PIN_MPHI_DATA_12 102 -#define BCM281XX_PIN_MPHI_DATA_13 103 -#define BCM281XX_PIN_MPHI_DATA_14 104 -#define BCM281XX_PIN_MPHI_DATA_15 105 -#define BCM281XX_PIN_MPHI_HA0 106 -#define BCM281XX_PIN_MPHI_HAT0 107 -#define BCM281XX_PIN_MPHI_HAT1 108 -#define BCM281XX_PIN_MPHI_HCE0_N 109 -#define BCM281XX_PIN_MPHI_HCE1_N 110 -#define BCM281XX_PIN_MPHI_HRD_N 111 -#define BCM281XX_PIN_MPHI_HWR_N 112 -#define BCM281XX_PIN_MPHI_RUN0 113 -#define BCM281XX_PIN_MPHI_RUN1 114 -#define BCM281XX_PIN_MTX_SCAN_CLK 115 -#define BCM281XX_PIN_MTX_SCAN_DATA 116 -#define BCM281XX_PIN_NAND_AD_0 117 -#define BCM281XX_PIN_NAND_AD_1 118 -#define BCM281XX_PIN_NAND_AD_2 119 -#define BCM281XX_PIN_NAND_AD_3 120 -#define BCM281XX_PIN_NAND_AD_4 121 -#define BCM281XX_PIN_NAND_AD_5 122 -#define BCM281XX_PIN_NAND_AD_6 123 -#define BCM281XX_PIN_NAND_AD_7 124 -#define BCM281XX_PIN_NAND_ALE 125 -#define BCM281XX_PIN_NAND_CEN_0 126 -#define BCM281XX_PIN_NAND_CEN_1 127 -#define BCM281XX_PIN_NAND_CLE 128 -#define BCM281XX_PIN_NAND_OEN 129 -#define BCM281XX_PIN_NAND_RDY_0 130 -#define BCM281XX_PIN_NAND_RDY_1 131 -#define BCM281XX_PIN_NAND_WEN 132 -#define BCM281XX_PIN_NAND_WP 133 -#define BCM281XX_PIN_PC1 134 -#define BCM281XX_PIN_PC2 135 -#define BCM281XX_PIN_PMU_INT 136 -#define BCM281XX_PIN_PMU_SCL 137 -#define BCM281XX_PIN_PMU_SDA 138 -#define BCM281XX_PIN_RFST2G_MTSLOTEN3G 139 -#define BCM281XX_PIN_RGMII_0_RX_CTL 140 -#define BCM281XX_PIN_RGMII_0_RXC 141 -#define BCM281XX_PIN_RGMII_0_RXD_0 142 -#define BCM281XX_PIN_RGMII_0_RXD_1 143 -#define BCM281XX_PIN_RGMII_0_RXD_2 144 -#define BCM281XX_PIN_RGMII_0_RXD_3 145 -#define BCM281XX_PIN_RGMII_0_TX_CTL 146 -#define BCM281XX_PIN_RGMII_0_TXC 147 -#define BCM281XX_PIN_RGMII_0_TXD_0 148 -#define BCM281XX_PIN_RGMII_0_TXD_1 149 -#define BCM281XX_PIN_RGMII_0_TXD_2 150 -#define BCM281XX_PIN_RGMII_0_TXD_3 151 -#define BCM281XX_PIN_RGMII_1_RX_CTL 152 -#define BCM281XX_PIN_RGMII_1_RXC 153 -#define BCM281XX_PIN_RGMII_1_RXD_0 154 -#define BCM281XX_PIN_RGMII_1_RXD_1 155 -#define BCM281XX_PIN_RGMII_1_RXD_2 156 -#define BCM281XX_PIN_RGMII_1_RXD_3 157 -#define BCM281XX_PIN_RGMII_1_TX_CTL 158 -#define BCM281XX_PIN_RGMII_1_TXC 159 -#define BCM281XX_PIN_RGMII_1_TXD_0 160 -#define BCM281XX_PIN_RGMII_1_TXD_1 161 -#define BCM281XX_PIN_RGMII_1_TXD_2 162 -#define BCM281XX_PIN_RGMII_1_TXD_3 163 -#define BCM281XX_PIN_RGMII_GPIO_0 164 -#define BCM281XX_PIN_RGMII_GPIO_1 165 -#define BCM281XX_PIN_RGMII_GPIO_2 166 -#define BCM281XX_PIN_RGMII_GPIO_3 167 -#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1 168 -#define BCM281XX_PIN_RTXEN2G_TXDATA3G2 169 -#define BCM281XX_PIN_RXDATA3G0 170 -#define BCM281XX_PIN_RXDATA3G1 171 -#define BCM281XX_PIN_RXDATA3G2 172 -#define BCM281XX_PIN_SDIO1_CLK 173 -#define BCM281XX_PIN_SDIO1_CMD 174 -#define BCM281XX_PIN_SDIO1_DATA_0 175 -#define BCM281XX_PIN_SDIO1_DATA_1 176 -#define BCM281XX_PIN_SDIO1_DATA_2 177 -#define BCM281XX_PIN_SDIO1_DATA_3 178 -#define BCM281XX_PIN_SDIO4_CLK 179 -#define BCM281XX_PIN_SDIO4_CMD 180 -#define BCM281XX_PIN_SDIO4_DATA_0 181 -#define BCM281XX_PIN_SDIO4_DATA_1 182 -#define BCM281XX_PIN_SDIO4_DATA_2 183 -#define BCM281XX_PIN_SDIO4_DATA_3 184 -#define BCM281XX_PIN_SIM_CLK 185 -#define BCM281XX_PIN_SIM_DATA 186 -#define BCM281XX_PIN_SIM_DET 187 -#define BCM281XX_PIN_SIM_RESETN 188 -#define BCM281XX_PIN_SIM2_CLK 189 -#define BCM281XX_PIN_SIM2_DATA 190 -#define BCM281XX_PIN_SIM2_DET 191 -#define BCM281XX_PIN_SIM2_RESETN 192 -#define BCM281XX_PIN_SRI_C 193 -#define BCM281XX_PIN_SRI_D 194 -#define BCM281XX_PIN_SRI_E 195 -#define BCM281XX_PIN_SSP_EXTCLK 196 -#define BCM281XX_PIN_SSP0_CLK 197 -#define BCM281XX_PIN_SSP0_FS 198 -#define BCM281XX_PIN_SSP0_RXD 199 -#define BCM281XX_PIN_SSP0_TXD 200 -#define BCM281XX_PIN_SSP2_CLK 201 -#define BCM281XX_PIN_SSP2_FS_0 202 -#define BCM281XX_PIN_SSP2_FS_1 203 -#define BCM281XX_PIN_SSP2_FS_2 204 -#define BCM281XX_PIN_SSP2_FS_3 205 -#define BCM281XX_PIN_SSP2_RXD_0 206 -#define BCM281XX_PIN_SSP2_RXD_1 207 -#define BCM281XX_PIN_SSP2_TXD_0 208 -#define BCM281XX_PIN_SSP2_TXD_1 209 -#define BCM281XX_PIN_SSP3_CLK 210 -#define BCM281XX_PIN_SSP3_FS 211 -#define BCM281XX_PIN_SSP3_RXD 212 -#define BCM281XX_PIN_SSP3_TXD 213 -#define BCM281XX_PIN_SSP4_CLK 214 -#define BCM281XX_PIN_SSP4_FS 215 -#define BCM281XX_PIN_SSP4_RXD 216 -#define BCM281XX_PIN_SSP4_TXD 217 -#define BCM281XX_PIN_SSP5_CLK 218 -#define BCM281XX_PIN_SSP5_FS 219 -#define BCM281XX_PIN_SSP5_RXD 220 -#define BCM281XX_PIN_SSP5_TXD 221 -#define BCM281XX_PIN_SSP6_CLK 222 -#define BCM281XX_PIN_SSP6_FS 223 -#define BCM281XX_PIN_SSP6_RXD 224 -#define BCM281XX_PIN_SSP6_TXD 225 -#define BCM281XX_PIN_STAT_1 226 -#define BCM281XX_PIN_STAT_2 227 -#define BCM281XX_PIN_SYSCLKEN 228 -#define BCM281XX_PIN_TRACECLK 229 -#define BCM281XX_PIN_TRACEDT00 230 -#define BCM281XX_PIN_TRACEDT01 231 -#define BCM281XX_PIN_TRACEDT02 232 -#define BCM281XX_PIN_TRACEDT03 233 -#define BCM281XX_PIN_TRACEDT04 234 -#define BCM281XX_PIN_TRACEDT05 235 -#define BCM281XX_PIN_TRACEDT06 236 -#define BCM281XX_PIN_TRACEDT07 237 -#define BCM281XX_PIN_TRACEDT08 238 -#define BCM281XX_PIN_TRACEDT09 239 -#define BCM281XX_PIN_TRACEDT10 240 -#define BCM281XX_PIN_TRACEDT11 241 -#define BCM281XX_PIN_TRACEDT12 242 -#define BCM281XX_PIN_TRACEDT13 243 -#define BCM281XX_PIN_TRACEDT14 244 -#define BCM281XX_PIN_TRACEDT15 245 -#define BCM281XX_PIN_TXDATA3G0 246 -#define BCM281XX_PIN_TXPWRIND 247 -#define BCM281XX_PIN_UARTB1_UCTS 248 -#define BCM281XX_PIN_UARTB1_URTS 249 -#define BCM281XX_PIN_UARTB1_URXD 250 -#define BCM281XX_PIN_UARTB1_UTXD 251 -#define BCM281XX_PIN_UARTB2_URXD 252 -#define BCM281XX_PIN_UARTB2_UTXD 253 -#define BCM281XX_PIN_UARTB3_UCTS 254 -#define BCM281XX_PIN_UARTB3_URTS 255 -#define BCM281XX_PIN_UARTB3_URXD 256 -#define BCM281XX_PIN_UARTB3_UTXD 257 -#define BCM281XX_PIN_UARTB4_UCTS 258 -#define BCM281XX_PIN_UARTB4_URTS 259 -#define BCM281XX_PIN_UARTB4_URXD 260 -#define BCM281XX_PIN_UARTB4_UTXD 261 -#define BCM281XX_PIN_VC_CAM1_SCL 262 -#define BCM281XX_PIN_VC_CAM1_SDA 263 -#define BCM281XX_PIN_VC_CAM2_SCL 264 -#define BCM281XX_PIN_VC_CAM2_SDA 265 -#define BCM281XX_PIN_VC_CAM3_SCL 266 -#define BCM281XX_PIN_VC_CAM3_SDA 267 - -#define BCM281XX_PIN_DESC(a, b, c) \ - { .number = a, .name = b, .drv_data = &c##_pin } - -/* - * Pin description definition. The order here must be the same as defined in - * the PADCTRLREG block in the RDB, since the pin number is used as an index - * into this array. - */ -static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = { - BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi), - BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi), - BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g", - std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1, - "rtxdata2g_txdata3g1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2", - std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std), - BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c), - BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c), -}; - -static const char * const bcm281xx_alt_groups[] = { - "adcsync", - "bat_rm", - "bsc1_scl", - "bsc1_sda", - "bsc2_scl", - "bsc2_sda", - "classgpwr", - "clk_cx8", - "clkout_0", - "clkout_1", - "clkout_2", - "clkout_3", - "clkreq_in_0", - "clkreq_in_1", - "cws_sys_req1", - "cws_sys_req2", - "cws_sys_req3", - "digmic1_clk", - "digmic1_dq", - "digmic2_clk", - "digmic2_dq", - "gpen13", - "gpen14", - "gpen15", - "gpio00", - "gpio01", - "gpio02", - "gpio03", - "gpio04", - "gpio05", - "gpio06", - "gpio07", - "gpio08", - "gpio09", - "gpio10", - "gpio11", - "gpio12", - "gpio13", - "gpio14", - "gps_pablank", - "gps_tmark", - "hdmi_scl", - "hdmi_sda", - "ic_dm", - "ic_dp", - "kp_col_ip_0", - "kp_col_ip_1", - "kp_col_ip_2", - "kp_col_ip_3", - "kp_row_op_0", - "kp_row_op_1", - "kp_row_op_2", - "kp_row_op_3", - "lcd_b_0", - "lcd_b_1", - "lcd_b_2", - "lcd_b_3", - "lcd_b_4", - "lcd_b_5", - "lcd_b_6", - "lcd_b_7", - "lcd_g_0", - "lcd_g_1", - "lcd_g_2", - "lcd_g_3", - "lcd_g_4", - "lcd_g_5", - "lcd_g_6", - "lcd_g_7", - "lcd_hsync", - "lcd_oe", - "lcd_pclk", - "lcd_r_0", - "lcd_r_1", - "lcd_r_2", - "lcd_r_3", - "lcd_r_4", - "lcd_r_5", - "lcd_r_6", - "lcd_r_7", - "lcd_vsync", - "mdmgpio0", - "mdmgpio1", - "mdmgpio2", - "mdmgpio3", - "mdmgpio4", - "mdmgpio5", - "mdmgpio6", - "mdmgpio7", - "mdmgpio8", - "mphi_data_0", - "mphi_data_1", - "mphi_data_2", - "mphi_data_3", - "mphi_data_4", - "mphi_data_5", - "mphi_data_6", - "mphi_data_7", - "mphi_data_8", - "mphi_data_9", - "mphi_data_10", - "mphi_data_11", - "mphi_data_12", - "mphi_data_13", - "mphi_data_14", - "mphi_data_15", - "mphi_ha0", - "mphi_hat0", - "mphi_hat1", - "mphi_hce0_n", - "mphi_hce1_n", - "mphi_hrd_n", - "mphi_hwr_n", - "mphi_run0", - "mphi_run1", - "mtx_scan_clk", - "mtx_scan_data", - "nand_ad_0", - "nand_ad_1", - "nand_ad_2", - "nand_ad_3", - "nand_ad_4", - "nand_ad_5", - "nand_ad_6", - "nand_ad_7", - "nand_ale", - "nand_cen_0", - "nand_cen_1", - "nand_cle", - "nand_oen", - "nand_rdy_0", - "nand_rdy_1", - "nand_wen", - "nand_wp", - "pc1", - "pc2", - "pmu_int", - "pmu_scl", - "pmu_sda", - "rfst2g_mtsloten3g", - "rgmii_0_rx_ctl", - "rgmii_0_rxc", - "rgmii_0_rxd_0", - "rgmii_0_rxd_1", - "rgmii_0_rxd_2", - "rgmii_0_rxd_3", - "rgmii_0_tx_ctl", - "rgmii_0_txc", - "rgmii_0_txd_0", - "rgmii_0_txd_1", - "rgmii_0_txd_2", - "rgmii_0_txd_3", - "rgmii_1_rx_ctl", - "rgmii_1_rxc", - "rgmii_1_rxd_0", - "rgmii_1_rxd_1", - "rgmii_1_rxd_2", - "rgmii_1_rxd_3", - "rgmii_1_tx_ctl", - "rgmii_1_txc", - "rgmii_1_txd_0", - "rgmii_1_txd_1", - "rgmii_1_txd_2", - "rgmii_1_txd_3", - "rgmii_gpio_0", - "rgmii_gpio_1", - "rgmii_gpio_2", - "rgmii_gpio_3", - "rtxdata2g_txdata3g1", - "rtxen2g_txdata3g2", - "rxdata3g0", - "rxdata3g1", - "rxdata3g2", - "sdio1_clk", - "sdio1_cmd", - "sdio1_data_0", - "sdio1_data_1", - "sdio1_data_2", - "sdio1_data_3", - "sdio4_clk", - "sdio4_cmd", - "sdio4_data_0", - "sdio4_data_1", - "sdio4_data_2", - "sdio4_data_3", - "sim_clk", - "sim_data", - "sim_det", - "sim_resetn", - "sim2_clk", - "sim2_data", - "sim2_det", - "sim2_resetn", - "sri_c", - "sri_d", - "sri_e", - "ssp_extclk", - "ssp0_clk", - "ssp0_fs", - "ssp0_rxd", - "ssp0_txd", - "ssp2_clk", - "ssp2_fs_0", - "ssp2_fs_1", - "ssp2_fs_2", - "ssp2_fs_3", - "ssp2_rxd_0", - "ssp2_rxd_1", - "ssp2_txd_0", - "ssp2_txd_1", - "ssp3_clk", - "ssp3_fs", - "ssp3_rxd", - "ssp3_txd", - "ssp4_clk", - "ssp4_fs", - "ssp4_rxd", - "ssp4_txd", - "ssp5_clk", - "ssp5_fs", - "ssp5_rxd", - "ssp5_txd", - "ssp6_clk", - "ssp6_fs", - "ssp6_rxd", - "ssp6_txd", - "stat_1", - "stat_2", - "sysclken", - "traceclk", - "tracedt00", - "tracedt01", - "tracedt02", - "tracedt03", - "tracedt04", - "tracedt05", - "tracedt06", - "tracedt07", - "tracedt08", - "tracedt09", - "tracedt10", - "tracedt11", - "tracedt12", - "tracedt13", - "tracedt14", - "tracedt15", - "txdata3g0", - "txpwrind", - "uartb1_ucts", - "uartb1_urts", - "uartb1_urxd", - "uartb1_utxd", - "uartb2_urxd", - "uartb2_utxd", - "uartb3_ucts", - "uartb3_urts", - "uartb3_urxd", - "uartb3_utxd", - "uartb4_ucts", - "uartb4_urts", - "uartb4_urxd", - "uartb4_utxd", - "vc_cam1_scl", - "vc_cam1_sda", - "vc_cam2_scl", - "vc_cam2_sda", - "vc_cam3_scl", - "vc_cam3_sda", -}; - -/* Every pin can implement all ALT1-ALT4 functions */ -#define BCM281XX_PIN_FUNCTION(fcn_name) \ -{ \ - .name = #fcn_name, \ - .groups = bcm281xx_alt_groups, \ - .ngroups = ARRAY_SIZE(bcm281xx_alt_groups), \ -} - -static const struct bcm281xx_pin_function bcm281xx_functions[] = { - BCM281XX_PIN_FUNCTION(alt1), - BCM281XX_PIN_FUNCTION(alt2), - BCM281XX_PIN_FUNCTION(alt3), - BCM281XX_PIN_FUNCTION(alt4), -}; - -static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = { - .pins = bcm281xx_pinctrl_pins, - .npins = ARRAY_SIZE(bcm281xx_pinctrl_pins), - .functions = bcm281xx_functions, - .nfunctions = ARRAY_SIZE(bcm281xx_functions), -}; - -static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev, - unsigned pin) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - if (pin >= pdata->npins) - return BCM281XX_PIN_TYPE_UNKNOWN; - - return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data); -} - -#define BCM281XX_PIN_SHIFT(type, param) \ - (BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT) - -#define BCM281XX_PIN_MASK(type, param) \ - (BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK) - -/* - * This helper function is used to build up the value and mask used to write to - * a pin register, but does not actually write to the register. - */ -static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask, - u32 param_val, u32 param_shift, - u32 param_mask) -{ - *reg_val &= ~param_mask; - *reg_val |= (param_val << param_shift) & param_mask; - *reg_mask |= param_mask; -} - -static struct regmap_config bcm281xx_pinctrl_regmap_config = { - .reg_bits = 32, - .reg_stride = 4, - .val_bits = 32, - .max_register = BCM281XX_PIN_VC_CAM3_SDA, -}; - -static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - return pdata->npins; -} - -static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev, - unsigned group) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - return pdata->pins[group].name; -} - -static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, - unsigned group, - const unsigned **pins, - unsigned *num_pins) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - *pins = &pdata->pins[group].number; - *num_pins = 1; - - return 0; -} - -static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, - struct seq_file *s, - unsigned offset) -{ - seq_printf(s, " %s", dev_name(pctldev->dev)); -} - -static struct pinctrl_ops bcm281xx_pinctrl_ops = { - .get_groups_count = bcm281xx_pinctrl_get_groups_count, - .get_group_name = bcm281xx_pinctrl_get_group_name, - .get_group_pins = bcm281xx_pinctrl_get_group_pins, - .pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show, - .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, - .dt_free_map = pinctrl_utils_dt_free_map, -}; - -static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - return pdata->nfunctions; -} - -static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev, - unsigned function) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - return pdata->functions[function].name; -} - -static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev, - unsigned function, - const char * const **groups, - unsigned * const num_groups) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - - *groups = pdata->functions[function].groups; - *num_groups = pdata->functions[function].ngroups; - - return 0; -} - -static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev, - unsigned function, - unsigned group) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - const struct bcm281xx_pin_function *f = &pdata->functions[function]; - u32 offset = 4 * pdata->pins[group].number; - int rc = 0; - - dev_dbg(pctldev->dev, - "%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n", - __func__, f->name, function, pdata->pins[group].name, - pdata->pins[group].number, offset); - - rc = regmap_update_bits(pdata->regmap, offset, - BCM281XX_PIN_REG_F_SEL_MASK, - function << BCM281XX_PIN_REG_F_SEL_SHIFT); - if (rc) - dev_err(pctldev->dev, - "Error updating register for pin %s (%d).\n", - pdata->pins[group].name, pdata->pins[group].number); - - return rc; -} - -static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = { - .get_functions_count = bcm281xx_pinctrl_get_fcns_count, - .get_function_name = bcm281xx_pinctrl_get_fcn_name, - .get_function_groups = bcm281xx_pinctrl_get_fcn_groups, - .set_mux = bcm281xx_pinmux_set, -}; - -static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev, - unsigned pin, - unsigned long *config) -{ - return -ENOTSUPP; -} - - -/* Goes through the configs and update register val/mask */ -static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev, - unsigned pin, - unsigned long *configs, - unsigned num_configs, - u32 *val, - u32 *mask) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - int i; - enum pin_config_param param; - u16 arg; - - for (i = 0; i < num_configs; i++) { - param = pinconf_to_config_param(configs[i]); - arg = pinconf_to_config_argument(configs[i]); - - switch (param) { - case PIN_CONFIG_INPUT_SCHMITT_ENABLE: - arg = (arg >= 1 ? 1 : 0); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(STD, HYST), - BCM281XX_PIN_MASK(STD, HYST)); - break; - /* - * The pin bias can only be one of pull-up, pull-down, or - * disable. The user does not need to specify a value for the - * property, and the default value from pinconf-generic is - * ignored. - */ - case PIN_CONFIG_BIAS_DISABLE: - bcm281xx_pin_update(val, mask, 0, - BCM281XX_PIN_SHIFT(STD, PULL_UP), - BCM281XX_PIN_MASK(STD, PULL_UP)); - bcm281xx_pin_update(val, mask, 0, - BCM281XX_PIN_SHIFT(STD, PULL_DN), - BCM281XX_PIN_MASK(STD, PULL_DN)); - break; - - case PIN_CONFIG_BIAS_PULL_UP: - bcm281xx_pin_update(val, mask, 1, - BCM281XX_PIN_SHIFT(STD, PULL_UP), - BCM281XX_PIN_MASK(STD, PULL_UP)); - bcm281xx_pin_update(val, mask, 0, - BCM281XX_PIN_SHIFT(STD, PULL_DN), - BCM281XX_PIN_MASK(STD, PULL_DN)); - break; - - case PIN_CONFIG_BIAS_PULL_DOWN: - bcm281xx_pin_update(val, mask, 0, - BCM281XX_PIN_SHIFT(STD, PULL_UP), - BCM281XX_PIN_MASK(STD, PULL_UP)); - bcm281xx_pin_update(val, mask, 1, - BCM281XX_PIN_SHIFT(STD, PULL_DN), - BCM281XX_PIN_MASK(STD, PULL_DN)); - break; - - case PIN_CONFIG_SLEW_RATE: - arg = (arg >= 1 ? 1 : 0); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(STD, SLEW), - BCM281XX_PIN_MASK(STD, SLEW)); - break; - - case PIN_CONFIG_INPUT_ENABLE: - /* inversed since register is for input _disable_ */ - arg = (arg >= 1 ? 0 : 1); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(STD, INPUT_DIS), - BCM281XX_PIN_MASK(STD, INPUT_DIS)); - break; - - case PIN_CONFIG_DRIVE_STRENGTH: - /* Valid range is 2-16 mA, even numbers only */ - if ((arg < 2) || (arg > 16) || (arg % 2)) { - dev_err(pctldev->dev, - "Invalid Drive Strength value (%d) for " - "pin %s (%d). Valid values are " - "(2..16) mA, even numbers only.\n", - arg, pdata->pins[pin].name, pin); - return -EINVAL; - } - bcm281xx_pin_update(val, mask, (arg/2)-1, - BCM281XX_PIN_SHIFT(STD, DRV_STR), - BCM281XX_PIN_MASK(STD, DRV_STR)); - break; - - default: - dev_err(pctldev->dev, - "Unrecognized pin config %d for pin %s (%d).\n", - param, pdata->pins[pin].name, pin); - return -EINVAL; - - } /* switch config */ - } /* for each config */ - - return 0; -} - -/* - * The pull-up strength for an I2C pin is represented by bits 4-6 in the - * register with the following mapping: - * 0b000: No pull-up - * 0b001: 1200 Ohm - * 0b010: 1800 Ohm - * 0b011: 720 Ohm - * 0b100: 2700 Ohm - * 0b101: 831 Ohm - * 0b110: 1080 Ohm - * 0b111: 568 Ohm - * This array maps pull-up strength in Ohms to register values (1+index). - */ -static const u16 bcm281xx_pullup_map[] = { - 1200, 1800, 720, 2700, 831, 1080, 568 -}; - -/* Goes through the configs and update register val/mask */ -static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev, - unsigned pin, - unsigned long *configs, - unsigned num_configs, - u32 *val, - u32 *mask) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - int i, j; - enum pin_config_param param; - u16 arg; - - for (i = 0; i < num_configs; i++) { - param = pinconf_to_config_param(configs[i]); - arg = pinconf_to_config_argument(configs[i]); - - switch (param) { - case PIN_CONFIG_BIAS_PULL_UP: - for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++) - if (bcm281xx_pullup_map[j] == arg) - break; - - if (j == ARRAY_SIZE(bcm281xx_pullup_map)) { - dev_err(pctldev->dev, - "Invalid pull-up value (%d) for pin %s " - "(%d). Valid values are 568, 720, 831, " - "1080, 1200, 1800, 2700 Ohms.\n", - arg, pdata->pins[pin].name, pin); - return -EINVAL; - } - - bcm281xx_pin_update(val, mask, j+1, - BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR), - BCM281XX_PIN_MASK(I2C, PULL_UP_STR)); - break; - - case PIN_CONFIG_BIAS_DISABLE: - bcm281xx_pin_update(val, mask, 0, - BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR), - BCM281XX_PIN_MASK(I2C, PULL_UP_STR)); - break; - - case PIN_CONFIG_SLEW_RATE: - arg = (arg >= 1 ? 1 : 0); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(I2C, SLEW), - BCM281XX_PIN_MASK(I2C, SLEW)); - break; - - case PIN_CONFIG_INPUT_ENABLE: - /* inversed since register is for input _disable_ */ - arg = (arg >= 1 ? 0 : 1); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(I2C, INPUT_DIS), - BCM281XX_PIN_MASK(I2C, INPUT_DIS)); - break; - - default: - dev_err(pctldev->dev, - "Unrecognized pin config %d for pin %s (%d).\n", - param, pdata->pins[pin].name, pin); - return -EINVAL; - - } /* switch config */ - } /* for each config */ - - return 0; -} - -/* Goes through the configs and update register val/mask */ -static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev, - unsigned pin, - unsigned long *configs, - unsigned num_configs, - u32 *val, - u32 *mask) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - int i; - enum pin_config_param param; - u16 arg; - - for (i = 0; i < num_configs; i++) { - param = pinconf_to_config_param(configs[i]); - arg = pinconf_to_config_argument(configs[i]); - - switch (param) { - case PIN_CONFIG_SLEW_RATE: - arg = (arg >= 1 ? 1 : 0); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(HDMI, MODE), - BCM281XX_PIN_MASK(HDMI, MODE)); - break; - - case PIN_CONFIG_INPUT_ENABLE: - /* inversed since register is for input _disable_ */ - arg = (arg >= 1 ? 0 : 1); - bcm281xx_pin_update(val, mask, arg, - BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS), - BCM281XX_PIN_MASK(HDMI, INPUT_DIS)); - break; - - default: - dev_err(pctldev->dev, - "Unrecognized pin config %d for pin %s (%d).\n", - param, pdata->pins[pin].name, pin); - return -EINVAL; - - } /* switch config */ - } /* for each config */ - - return 0; -} - -static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev, - unsigned pin, - unsigned long *configs, - unsigned num_configs) -{ - struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); - enum bcm281xx_pin_type pin_type; - u32 offset = 4 * pin; - u32 cfg_val, cfg_mask; - int rc; - - cfg_val = 0; - cfg_mask = 0; - pin_type = pin_type_get(pctldev, pin); - - /* Different pins have different configuration options */ - switch (pin_type) { - case BCM281XX_PIN_TYPE_STD: - rc = bcm281xx_std_pin_update(pctldev, pin, configs, - num_configs, &cfg_val, &cfg_mask); - break; - - case BCM281XX_PIN_TYPE_I2C: - rc = bcm281xx_i2c_pin_update(pctldev, pin, configs, - num_configs, &cfg_val, &cfg_mask); - break; - - case BCM281XX_PIN_TYPE_HDMI: - rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs, - num_configs, &cfg_val, &cfg_mask); - break; - - default: - dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n", - pdata->pins[pin].name, pin); - return -EINVAL; - - } /* switch pin type */ - - if (rc) - return rc; - - dev_dbg(pctldev->dev, - "%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n", - __func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask); - - rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val); - if (rc) { - dev_err(pctldev->dev, - "Error updating register for pin %s (%d).\n", - pdata->pins[pin].name, pin); - return rc; - } - - return 0; -} - -static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = { - .pin_config_get = bcm281xx_pinctrl_pin_config_get, - .pin_config_set = bcm281xx_pinctrl_pin_config_set, -}; - -static struct pinctrl_desc bcm281xx_pinctrl_desc = { - /* name, pins, npins members initialized in probe function */ - .pctlops = &bcm281xx_pinctrl_ops, - .pmxops = &bcm281xx_pinctrl_pinmux_ops, - .confops = &bcm281xx_pinctrl_pinconf_ops, - .owner = THIS_MODULE, -}; - -static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev) -{ - struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl; - struct resource *res; - struct pinctrl_dev *pctl; - - /* So far We can assume there is only 1 bank of registers */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pdata->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(pdata->reg_base)) { - dev_err(&pdev->dev, "Failed to ioremap MEM resource\n"); - return -ENODEV; - } - - /* Initialize the dynamic part of pinctrl_desc */ - pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base, - &bcm281xx_pinctrl_regmap_config); - if (IS_ERR(pdata->regmap)) { - dev_err(&pdev->dev, "Regmap MMIO init failed.\n"); - return -ENODEV; - } - - bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev); - bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins; - bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins; - - pctl = pinctrl_register(&bcm281xx_pinctrl_desc, - &pdev->dev, - pdata); - if (!pctl) { - dev_err(&pdev->dev, "Failed to register pinctrl\n"); - return -ENODEV; - } - - platform_set_drvdata(pdev, pdata); - - return 0; -} - -static struct of_device_id bcm281xx_pinctrl_of_match[] = { - { .compatible = "brcm,bcm11351-pinctrl", }, - { }, -}; - -static struct platform_driver bcm281xx_pinctrl_driver = { - .driver = { - .name = "bcm281xx-pinctrl", - .of_match_table = bcm281xx_pinctrl_of_match, - }, -}; - -module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe); - -MODULE_AUTHOR("Broadcom Corporation "); -MODULE_AUTHOR("Sherman Yin "); -MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c deleted file mode 100644 index 9aa8a3f..0000000 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ /dev/null @@ -1,1072 +0,0 @@ -/* - * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO) - * - * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren - * - * This driver is inspired by: - * pinctrl-nomadik.c, please see original file for copyright information - * pinctrl-tegra.c, please see original file for copyright information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MODULE_NAME "pinctrl-bcm2835" -#define BCM2835_NUM_GPIOS 54 -#define BCM2835_NUM_BANKS 2 - -#define BCM2835_PIN_BITMAP_SZ \ - DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8) - -/* GPIO register offsets */ -#define GPFSEL0 0x0 /* Function Select */ -#define GPSET0 0x1c /* Pin Output Set */ -#define GPCLR0 0x28 /* Pin Output Clear */ -#define GPLEV0 0x34 /* Pin Level */ -#define GPEDS0 0x40 /* Pin Event Detect Status */ -#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */ -#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */ -#define GPHEN0 0x64 /* Pin High Detect Enable */ -#define GPLEN0 0x70 /* Pin Low Detect Enable */ -#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */ -#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */ -#define GPPUD 0x94 /* Pin Pull-up/down Enable */ -#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */ - -#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4)) -#define FSEL_SHIFT(p) (((p) % 10) * 3) -#define GPIO_REG_OFFSET(p) ((p) / 32) -#define GPIO_REG_SHIFT(p) ((p) % 32) - -enum bcm2835_pinconf_param { - /* argument: bcm2835_pinconf_pull */ - BCM2835_PINCONF_PARAM_PULL, -}; - -enum bcm2835_pinconf_pull { - BCM2835_PINCONFIG_PULL_NONE, - BCM2835_PINCONFIG_PULL_DOWN, - BCM2835_PINCONFIG_PULL_UP, -}; - -#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) -#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) -#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) - -struct bcm2835_gpio_irqdata { - struct bcm2835_pinctrl *pc; - int bank; -}; - -struct bcm2835_pinctrl { - struct device *dev; - void __iomem *base; - int irq[BCM2835_NUM_BANKS]; - - /* note: locking assumes each bank will have its own unsigned long */ - unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; - unsigned int irq_type[BCM2835_NUM_GPIOS]; - - struct pinctrl_dev *pctl_dev; - struct irq_domain *irq_domain; - struct gpio_chip gpio_chip; - struct pinctrl_gpio_range gpio_range; - - struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS]; - spinlock_t irq_lock[BCM2835_NUM_BANKS]; -}; - -static struct lock_class_key gpio_lock_class; - -/* pins are just named GPIO0..GPIO53 */ -#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a) -static struct pinctrl_pin_desc bcm2835_gpio_pins[] = { - BCM2835_GPIO_PIN(0), - BCM2835_GPIO_PIN(1), - BCM2835_GPIO_PIN(2), - BCM2835_GPIO_PIN(3), - BCM2835_GPIO_PIN(4), - BCM2835_GPIO_PIN(5), - BCM2835_GPIO_PIN(6), - BCM2835_GPIO_PIN(7), - BCM2835_GPIO_PIN(8), - BCM2835_GPIO_PIN(9), - BCM2835_GPIO_PIN(10), - BCM2835_GPIO_PIN(11), - BCM2835_GPIO_PIN(12), - BCM2835_GPIO_PIN(13), - BCM2835_GPIO_PIN(14), - BCM2835_GPIO_PIN(15), - BCM2835_GPIO_PIN(16), - BCM2835_GPIO_PIN(17), - BCM2835_GPIO_PIN(18), - BCM2835_GPIO_PIN(19), - BCM2835_GPIO_PIN(20), - BCM2835_GPIO_PIN(21), - BCM2835_GPIO_PIN(22), - BCM2835_GPIO_PIN(23), - BCM2835_GPIO_PIN(24), - BCM2835_GPIO_PIN(25), - BCM2835_GPIO_PIN(26), - BCM2835_GPIO_PIN(27), - BCM2835_GPIO_PIN(28), - BCM2835_GPIO_PIN(29), - BCM2835_GPIO_PIN(30), - BCM2835_GPIO_PIN(31), - BCM2835_GPIO_PIN(32), - BCM2835_GPIO_PIN(33), - BCM2835_GPIO_PIN(34), - BCM2835_GPIO_PIN(35), - BCM2835_GPIO_PIN(36), - BCM2835_GPIO_PIN(37), - BCM2835_GPIO_PIN(38), - BCM2835_GPIO_PIN(39), - BCM2835_GPIO_PIN(40), - BCM2835_GPIO_PIN(41), - BCM2835_GPIO_PIN(42), - BCM2835_GPIO_PIN(43), - BCM2835_GPIO_PIN(44), - BCM2835_GPIO_PIN(45), - BCM2835_GPIO_PIN(46), - BCM2835_GPIO_PIN(47), - BCM2835_GPIO_PIN(48), - BCM2835_GPIO_PIN(49), - BCM2835_GPIO_PIN(50), - BCM2835_GPIO_PIN(51), - BCM2835_GPIO_PIN(52), - BCM2835_GPIO_PIN(53), -}; - -/* one pin per group */ -static const char * const bcm2835_gpio_groups[] = { - "gpio0", - "gpio1", - "gpio2", - "gpio3", - "gpio4", - "gpio5", - "gpio6", - "gpio7", - "gpio8", - "gpio9", - "gpio10", - "gpio11", - "gpio12", - "gpio13", - "gpio14", - "gpio15", - "gpio16", - "gpio17", - "gpio18", - "gpio19", - "gpio20", - "gpio21", - "gpio22", - "gpio23", - "gpio24", - "gpio25", - "gpio26", - "gpio27", - "gpio28", - "gpio29", - "gpio30", - "gpio31", - "gpio32", - "gpio33", - "gpio34", - "gpio35", - "gpio36", - "gpio37", - "gpio38", - "gpio39", - "gpio40", - "gpio41", - "gpio42", - "gpio43", - "gpio44", - "gpio45", - "gpio46", - "gpio47", - "gpio48", - "gpio49", - "gpio50", - "gpio51", - "gpio52", - "gpio53", -}; - -enum bcm2835_fsel { - BCM2835_FSEL_GPIO_IN = 0, - BCM2835_FSEL_GPIO_OUT = 1, - BCM2835_FSEL_ALT0 = 4, - BCM2835_FSEL_ALT1 = 5, - BCM2835_FSEL_ALT2 = 6, - BCM2835_FSEL_ALT3 = 7, - BCM2835_FSEL_ALT4 = 3, - BCM2835_FSEL_ALT5 = 2, - BCM2835_FSEL_COUNT = 8, - BCM2835_FSEL_MASK = 0x7, -}; - -static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = { - [BCM2835_FSEL_GPIO_IN] = "gpio_in", - [BCM2835_FSEL_GPIO_OUT] = "gpio_out", - [BCM2835_FSEL_ALT0] = "alt0", - [BCM2835_FSEL_ALT1] = "alt1", - [BCM2835_FSEL_ALT2] = "alt2", - [BCM2835_FSEL_ALT3] = "alt3", - [BCM2835_FSEL_ALT4] = "alt4", - [BCM2835_FSEL_ALT5] = "alt5", -}; - -static const char * const irq_type_names[] = { - [IRQ_TYPE_NONE] = "none", - [IRQ_TYPE_EDGE_RISING] = "edge-rising", - [IRQ_TYPE_EDGE_FALLING] = "edge-falling", - [IRQ_TYPE_EDGE_BOTH] = "edge-both", - [IRQ_TYPE_LEVEL_HIGH] = "level-high", - [IRQ_TYPE_LEVEL_LOW] = "level-low", -}; - -static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg) -{ - return readl(pc->base + reg); -} - -static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg, - u32 val) -{ - writel(val, pc->base + reg); -} - -static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg, - unsigned bit) -{ - reg += GPIO_REG_OFFSET(bit) * 4; - return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1; -} - -/* note NOT a read/modify/write cycle */ -static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc, - unsigned reg, unsigned bit) -{ - reg += GPIO_REG_OFFSET(bit) * 4; - bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit))); -} - -static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get( - struct bcm2835_pinctrl *pc, unsigned pin) -{ - u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin)); - enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK; - - dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin, - bcm2835_functions[status]); - - return status; -} - -static inline void bcm2835_pinctrl_fsel_set( - struct bcm2835_pinctrl *pc, unsigned pin, - enum bcm2835_fsel fsel) -{ - u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin)); - enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK; - - dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin, - bcm2835_functions[cur]); - - if (cur == fsel) - return; - - if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) { - /* always transition through GPIO_IN */ - val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin)); - val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin); - - dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin, - bcm2835_functions[BCM2835_FSEL_GPIO_IN]); - bcm2835_gpio_wr(pc, FSEL_REG(pin), val); - } - - val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin)); - val |= fsel << FSEL_SHIFT(pin); - - dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin, - bcm2835_functions[fsel]); - bcm2835_gpio_wr(pc, FSEL_REG(pin), val); -} - -static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - return pinctrl_request_gpio(chip->base + offset); -} - -static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - pinctrl_free_gpio(chip->base + offset); -} - -static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - return pinctrl_gpio_direction_input(chip->base + offset); -} - -static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); - - return bcm2835_gpio_get_bit(pc, GPLEV0, offset); -} - -static int bcm2835_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - return pinctrl_gpio_direction_output(chip->base + offset); -} - -static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); - - bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset); -} - -static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); - - return irq_linear_revmap(pc->irq_domain, offset); -} - -static struct gpio_chip bcm2835_gpio_chip = { - .label = MODULE_NAME, - .owner = THIS_MODULE, - .request = bcm2835_gpio_request, - .free = bcm2835_gpio_free, - .direction_input = bcm2835_gpio_direction_input, - .direction_output = bcm2835_gpio_direction_output, - .get = bcm2835_gpio_get, - .set = bcm2835_gpio_set, - .to_irq = bcm2835_gpio_to_irq, - .base = -1, - .ngpio = BCM2835_NUM_GPIOS, - .can_sleep = false, -}; - -static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) -{ - struct bcm2835_gpio_irqdata *irqdata = dev_id; - struct bcm2835_pinctrl *pc = irqdata->pc; - int bank = irqdata->bank; - unsigned long events; - unsigned offset; - unsigned gpio; - unsigned int type; - - events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); - events &= pc->enabled_irq_map[bank]; - for_each_set_bit(offset, &events, 32) { - gpio = (32 * bank) + offset; - type = pc->irq_type[gpio]; - - /* ack edge triggered IRQs immediately */ - if (!(type & IRQ_TYPE_LEVEL_MASK)) - bcm2835_gpio_set_bit(pc, GPEDS0, gpio); - - generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); - - /* ack level triggered IRQ after handling them */ - if (type & IRQ_TYPE_LEVEL_MASK) - bcm2835_gpio_set_bit(pc, GPEDS0, gpio); - } - return events ? IRQ_HANDLED : IRQ_NONE; -} - -static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, - unsigned reg, unsigned offset, bool enable) -{ - u32 value; - reg += GPIO_REG_OFFSET(offset) * 4; - value = bcm2835_gpio_rd(pc, reg); - if (enable) - value |= BIT(GPIO_REG_SHIFT(offset)); - else - value &= ~(BIT(GPIO_REG_SHIFT(offset))); - bcm2835_gpio_wr(pc, reg, value); -} - -/* fast path for IRQ handler */ -static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, - unsigned offset, bool enable) -{ - switch (pc->irq_type[offset]) { - case IRQ_TYPE_EDGE_RISING: - __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable); - break; - - case IRQ_TYPE_EDGE_FALLING: - __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable); - break; - - case IRQ_TYPE_EDGE_BOTH: - __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable); - __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable); - break; - - case IRQ_TYPE_LEVEL_HIGH: - __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable); - break; - - case IRQ_TYPE_LEVEL_LOW: - __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable); - break; - } -} - -static void bcm2835_gpio_irq_enable(struct irq_data *data) -{ - struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); - unsigned gpio = irqd_to_hwirq(data); - unsigned offset = GPIO_REG_SHIFT(gpio); - unsigned bank = GPIO_REG_OFFSET(gpio); - unsigned long flags; - - spin_lock_irqsave(&pc->irq_lock[bank], flags); - set_bit(offset, &pc->enabled_irq_map[bank]); - bcm2835_gpio_irq_config(pc, gpio, true); - spin_unlock_irqrestore(&pc->irq_lock[bank], flags); -} - -static void bcm2835_gpio_irq_disable(struct irq_data *data) -{ - struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); - unsigned gpio = irqd_to_hwirq(data); - unsigned offset = GPIO_REG_SHIFT(gpio); - unsigned bank = GPIO_REG_OFFSET(gpio); - unsigned long flags; - - spin_lock_irqsave(&pc->irq_lock[bank], flags); - bcm2835_gpio_irq_config(pc, gpio, false); - clear_bit(offset, &pc->enabled_irq_map[bank]); - spin_unlock_irqrestore(&pc->irq_lock[bank], flags); -} - -static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc, - unsigned offset, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_NONE: - case IRQ_TYPE_EDGE_RISING: - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_EDGE_BOTH: - case IRQ_TYPE_LEVEL_HIGH: - case IRQ_TYPE_LEVEL_LOW: - pc->irq_type[offset] = type; - break; - - default: - return -EINVAL; - } - return 0; -} - -/* slower path for reconfiguring IRQ type */ -static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc, - unsigned offset, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_NONE: - if (pc->irq_type[offset] != type) { - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - } - break; - - case IRQ_TYPE_EDGE_RISING: - if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) { - /* RISING already enabled, disable FALLING */ - pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING; - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - } else if (pc->irq_type[offset] != type) { - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - bcm2835_gpio_irq_config(pc, offset, true); - } - break; - - case IRQ_TYPE_EDGE_FALLING: - if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) { - /* FALLING already enabled, disable RISING */ - pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING; - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - } else if (pc->irq_type[offset] != type) { - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - bcm2835_gpio_irq_config(pc, offset, true); - } - break; - - case IRQ_TYPE_EDGE_BOTH: - if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) { - /* RISING already enabled, enable FALLING too */ - pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING; - bcm2835_gpio_irq_config(pc, offset, true); - pc->irq_type[offset] = type; - } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) { - /* FALLING already enabled, enable RISING too */ - pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING; - bcm2835_gpio_irq_config(pc, offset, true); - pc->irq_type[offset] = type; - } else if (pc->irq_type[offset] != type) { - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - bcm2835_gpio_irq_config(pc, offset, true); - } - break; - - case IRQ_TYPE_LEVEL_HIGH: - case IRQ_TYPE_LEVEL_LOW: - if (pc->irq_type[offset] != type) { - bcm2835_gpio_irq_config(pc, offset, false); - pc->irq_type[offset] = type; - bcm2835_gpio_irq_config(pc, offset, true); - } - break; - - default: - return -EINVAL; - } - return 0; -} - -static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type) -{ - struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); - unsigned gpio = irqd_to_hwirq(data); - unsigned offset = GPIO_REG_SHIFT(gpio); - unsigned bank = GPIO_REG_OFFSET(gpio); - unsigned long flags; - int ret; - - spin_lock_irqsave(&pc->irq_lock[bank], flags); - - if (test_bit(offset, &pc->enabled_irq_map[bank])) - ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type); - else - ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type); - - spin_unlock_irqrestore(&pc->irq_lock[bank], flags); - - return ret; -} - -static struct irq_chip bcm2835_gpio_irq_chip = { - .name = MODULE_NAME, - .irq_enable = bcm2835_gpio_irq_enable, - .irq_disable = bcm2835_gpio_irq_disable, - .irq_set_type = bcm2835_gpio_irq_set_type, -}; - -static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev) -{ - return ARRAY_SIZE(bcm2835_gpio_groups); -} - -static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev, - unsigned selector) -{ - return bcm2835_gpio_groups[selector]; -} - -static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev, - unsigned selector, - const unsigned **pins, - unsigned *num_pins) -{ - *pins = &bcm2835_gpio_pins[selector].number; - *num_pins = 1; - - return 0; -} - -static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev, - struct seq_file *s, - unsigned offset) -{ - struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset); - const char *fname = bcm2835_functions[fsel]; - int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset); - int irq = irq_find_mapping(pc->irq_domain, offset); - - seq_printf(s, "function %s in %s; irq %d (%s)", - fname, value ? "hi" : "lo", - irq, irq_type_names[pc->irq_type[offset]]); -} - -static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev, - struct pinctrl_map *maps, unsigned num_maps) -{ - int i; - - for (i = 0; i < num_maps; i++) - if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN) - kfree(maps[i].data.configs.configs); - - kfree(maps); -} - -static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc, - struct device_node *np, u32 pin, u32 fnum, - struct pinctrl_map **maps) -{ - struct pinctrl_map *map = *maps; - - if (fnum >= ARRAY_SIZE(bcm2835_functions)) { - dev_err(pc->dev, "%s: invalid brcm,function %d\n", - of_node_full_name(np), fnum); - return -EINVAL; - } - - map->type = PIN_MAP_TYPE_MUX_GROUP; - map->data.mux.group = bcm2835_gpio_groups[pin]; - map->data.mux.function = bcm2835_functions[fnum]; - (*maps)++; - - return 0; -} - -static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, - struct device_node *np, u32 pin, u32 pull, - struct pinctrl_map **maps) -{ - struct pinctrl_map *map = *maps; - unsigned long *configs; - - if (pull > 2) { - dev_err(pc->dev, "%s: invalid brcm,pull %d\n", - of_node_full_name(np), pull); - return -EINVAL; - } - - configs = kzalloc(sizeof(*configs), GFP_KERNEL); - if (!configs) - return -ENOMEM; - configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull); - - map->type = PIN_MAP_TYPE_CONFIGS_PIN; - map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name; - map->data.configs.configs = configs; - map->data.configs.num_configs = 1; - (*maps)++; - - return 0; -} - -static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, - struct device_node *np, - struct pinctrl_map **map, unsigned *num_maps) -{ - struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - struct property *pins, *funcs, *pulls; - int num_pins, num_funcs, num_pulls, maps_per_pin; - struct pinctrl_map *maps, *cur_map; - int i, err; - u32 pin, func, pull; - - pins = of_find_property(np, "brcm,pins", NULL); - if (!pins) { - dev_err(pc->dev, "%s: missing brcm,pins property\n", - of_node_full_name(np)); - return -EINVAL; - } - - funcs = of_find_property(np, "brcm,function", NULL); - pulls = of_find_property(np, "brcm,pull", NULL); - - if (!funcs && !pulls) { - dev_err(pc->dev, - "%s: neither brcm,function nor brcm,pull specified\n", - of_node_full_name(np)); - return -EINVAL; - } - - num_pins = pins->length / 4; - num_funcs = funcs ? (funcs->length / 4) : 0; - num_pulls = pulls ? (pulls->length / 4) : 0; - - if (num_funcs > 1 && num_funcs != num_pins) { - dev_err(pc->dev, - "%s: brcm,function must have 1 or %d entries\n", - of_node_full_name(np), num_pins); - return -EINVAL; - } - - if (num_pulls > 1 && num_pulls != num_pins) { - dev_err(pc->dev, - "%s: brcm,pull must have 1 or %d entries\n", - of_node_full_name(np), num_pins); - return -EINVAL; - } - - maps_per_pin = 0; - if (num_funcs) - maps_per_pin++; - if (num_pulls) - maps_per_pin++; - cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps), - GFP_KERNEL); - if (!maps) - return -ENOMEM; - - for (i = 0; i < num_pins; i++) { - err = of_property_read_u32_index(np, "brcm,pins", i, &pin); - if (err) - goto out; - if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) { - dev_err(pc->dev, "%s: invalid brcm,pins value %d\n", - of_node_full_name(np), pin); - err = -EINVAL; - goto out; - } - - if (num_funcs) { - err = of_property_read_u32_index(np, "brcm,function", - (num_funcs > 1) ? i : 0, &func); - if (err) - goto out; - err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin, - func, &cur_map); - if (err) - goto out; - } - if (num_pulls) { - err = of_property_read_u32_index(np, "brcm,pull", - (num_funcs > 1) ? i : 0, &pull); - if (err) - goto out; - err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin, - pull, &cur_map); - if (err) - goto out; - } - } - - *map = maps; - *num_maps = num_pins * maps_per_pin; - - return 0; - -out: - kfree(maps); - return err; -} - -static const struct pinctrl_ops bcm2835_pctl_ops = { - .get_groups_count = bcm2835_pctl_get_groups_count, - .get_group_name = bcm2835_pctl_get_group_name, - .get_group_pins = bcm2835_pctl_get_group_pins, - .pin_dbg_show = bcm2835_pctl_pin_dbg_show, - .dt_node_to_map = bcm2835_pctl_dt_node_to_map, - .dt_free_map = bcm2835_pctl_dt_free_map, -}; - -static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev) -{ - return BCM2835_FSEL_COUNT; -} - -static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev, - unsigned selector) -{ - return bcm2835_functions[selector]; -} - -static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev, - unsigned selector, - const char * const **groups, - unsigned * const num_groups) -{ - /* every pin can do every function */ - *groups = bcm2835_gpio_groups; - *num_groups = ARRAY_SIZE(bcm2835_gpio_groups); - - return 0; -} - -static int bcm2835_pmx_set(struct pinctrl_dev *pctldev, - unsigned func_selector, - unsigned group_selector) -{ - struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - - bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector); - - return 0; -} - -static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range, - unsigned offset) -{ - struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - - /* disable by setting to GPIO_IN */ - bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN); -} - -static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range, - unsigned offset, - bool input) -{ - struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - enum bcm2835_fsel fsel = input ? - BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT; - - bcm2835_pinctrl_fsel_set(pc, offset, fsel); - - return 0; -} - -static const struct pinmux_ops bcm2835_pmx_ops = { - .get_functions_count = bcm2835_pmx_get_functions_count, - .get_function_name = bcm2835_pmx_get_function_name, - .get_function_groups = bcm2835_pmx_get_function_groups, - .set_mux = bcm2835_pmx_set, - .gpio_disable_free = bcm2835_pmx_gpio_disable_free, - .gpio_set_direction = bcm2835_pmx_gpio_set_direction, -}; - -static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long *config) -{ - /* No way to read back config in HW */ - return -ENOTSUPP; -} - -static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long *configs, - unsigned num_configs) -{ - struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - enum bcm2835_pinconf_param param; - u16 arg; - u32 off, bit; - int i; - - for (i = 0; i < num_configs; i++) { - param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]); - arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]); - - if (param != BCM2835_PINCONF_PARAM_PULL) - return -EINVAL; - - off = GPIO_REG_OFFSET(pin); - bit = GPIO_REG_SHIFT(pin); - - bcm2835_gpio_wr(pc, GPPUD, arg & 3); - /* - * Docs say to wait 150 cycles, but not of what. We assume a - * 1 MHz clock here, which is pretty slow... - */ - udelay(150); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); - udelay(150); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); - } /* for each config */ - - return 0; -} - -static const struct pinconf_ops bcm2835_pinconf_ops = { - .pin_config_get = bcm2835_pinconf_get, - .pin_config_set = bcm2835_pinconf_set, -}; - -static struct pinctrl_desc bcm2835_pinctrl_desc = { - .name = MODULE_NAME, - .pins = bcm2835_gpio_pins, - .npins = ARRAY_SIZE(bcm2835_gpio_pins), - .pctlops = &bcm2835_pctl_ops, - .pmxops = &bcm2835_pmx_ops, - .confops = &bcm2835_pinconf_ops, - .owner = THIS_MODULE, -}; - -static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { - .name = MODULE_NAME, - .npins = BCM2835_NUM_GPIOS, -}; - -static int bcm2835_pinctrl_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct bcm2835_pinctrl *pc; - struct resource iomem; - int err, i; - BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS); - BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS); - - pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); - if (!pc) - return -ENOMEM; - - platform_set_drvdata(pdev, pc); - pc->dev = dev; - - err = of_address_to_resource(np, 0, &iomem); - if (err) { - dev_err(dev, "could not get IO memory\n"); - return err; - } - - pc->base = devm_ioremap_resource(dev, &iomem); - if (IS_ERR(pc->base)) - return PTR_ERR(pc->base); - - pc->gpio_chip = bcm2835_gpio_chip; - pc->gpio_chip.dev = dev; - pc->gpio_chip.of_node = np; - - pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS, - &irq_domain_simple_ops, NULL); - if (!pc->irq_domain) { - dev_err(dev, "could not create IRQ domain\n"); - return -ENOMEM; - } - - for (i = 0; i < BCM2835_NUM_GPIOS; i++) { - int irq = irq_create_mapping(pc->irq_domain, i); - irq_set_lockdep_class(irq, &gpio_lock_class); - irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip, - handle_simple_irq); - irq_set_chip_data(irq, pc); - set_irq_flags(irq, IRQF_VALID); - } - - for (i = 0; i < BCM2835_NUM_BANKS; i++) { - unsigned long events; - unsigned offset; - int len; - char *name; - - /* clear event detection flags */ - bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0); - bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0); - bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0); - bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0); - bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0); - bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0); - - /* clear all the events */ - events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4); - for_each_set_bit(offset, &events, 32) - bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset)); - - pc->irq[i] = irq_of_parse_and_map(np, i); - pc->irq_data[i].pc = pc; - pc->irq_data[i].bank = i; - spin_lock_init(&pc->irq_lock[i]); - - len = strlen(dev_name(pc->dev)) + 16; - name = devm_kzalloc(pc->dev, len, GFP_KERNEL); - if (!name) - return -ENOMEM; - snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i); - - err = devm_request_irq(dev, pc->irq[i], - bcm2835_gpio_irq_handler, IRQF_SHARED, - name, &pc->irq_data[i]); - if (err) { - dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]); - return err; - } - } - - err = gpiochip_add(&pc->gpio_chip); - if (err) { - dev_err(dev, "could not add GPIO chip\n"); - return err; - } - - pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc); - if (!pc->pctl_dev) { - gpiochip_remove(&pc->gpio_chip); - return -EINVAL; - } - - pc->gpio_range = bcm2835_pinctrl_gpio_range; - pc->gpio_range.base = pc->gpio_chip.base; - pc->gpio_range.gc = &pc->gpio_chip; - pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); - - return 0; -} - -static int bcm2835_pinctrl_remove(struct platform_device *pdev) -{ - struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev); - - pinctrl_unregister(pc->pctl_dev); - gpiochip_remove(&pc->gpio_chip); - - return 0; -} - -static struct of_device_id bcm2835_pinctrl_match[] = { - { .compatible = "brcm,bcm2835-gpio" }, - {} -}; -MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match); - -static struct platform_driver bcm2835_pinctrl_driver = { - .probe = bcm2835_pinctrl_probe, - .remove = bcm2835_pinctrl_remove, - .driver = { - .name = MODULE_NAME, - .of_match_table = bcm2835_pinctrl_match, - }, -}; -module_platform_driver(bcm2835_pinctrl_driver); - -MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren"); -MODULE_DESCRIPTION("BCM2835 Pin control driver"); -MODULE_LICENSE("GPL"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/