Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161508AbbBDPbY (ORCPT ); Wed, 4 Feb 2015 10:31:24 -0500 Received: from mailapp01.imgtec.com ([195.59.15.196]:65502 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934151AbbBDPWk (ORCPT ); Wed, 4 Feb 2015 10:22:40 -0500 From: Zubair Lutfullah Kakakhel To: CC: , , , , , , , , , , , , Subject: [PATCH_V2 17/34] MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu Date: Wed, 4 Feb 2015 15:21:46 +0000 Message-ID: <1423063323-19419-18-git-send-email-Zubair.Kakakhel@imgtec.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com> References: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [192.168.154.89] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3231 Lines: 111 From: Paul Burton The jz4740-cgu driver already has access to the CGU, so it makes sense to move the few remaining accesses to the CGU from arch/mips/jz4740 there too. Move jz4740_clock_set_wait_mode for such consistency. Signed-off-by: Paul Burton Cc: Lars-Peter Clausen Cc: Mike Turquette --- arch/mips/jz4740/clock.c | 16 ---------------- drivers/clk/jz47xx/jz4740-cgu.c | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 16 deletions(-) diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c index dedee7c..90b44d7 100644 --- a/arch/mips/jz4740/clock.c +++ b/arch/mips/jz4740/clock.c @@ -28,7 +28,6 @@ #include "clock.h" -#define JZ_REG_CLOCK_LOW_POWER 0x04 #define JZ_REG_CLOCK_PLL 0x10 #define JZ_REG_CLOCK_GATE 0x20 @@ -40,9 +39,6 @@ #define JZ_CLOCK_PLL_STABLE BIT(10) #define JZ_CLOCK_PLL_ENABLED BIT(8) -#define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2) -#define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0) - static void __iomem *jz_clock_base; static uint32_t jz_clk_reg_read(int reg) @@ -68,18 +64,6 @@ static void jz_clk_reg_clear_bits(int reg, uint32_t mask) writel(val, jz_clock_base + reg); } -void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode) -{ - switch (mode) { - case JZ4740_WAIT_MODE_IDLE: - jz_clk_reg_clear_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP); - break; - case JZ4740_WAIT_MODE_SLEEP: - jz_clk_reg_set_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP); - break; - } -} - void jz4740_clock_udc_disable_auto_suspend(void) { jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC); diff --git a/drivers/clk/jz47xx/jz4740-cgu.c b/drivers/clk/jz47xx/jz4740-cgu.c index 83f1e1f..ef559e7 100644 --- a/drivers/clk/jz47xx/jz4740-cgu.c +++ b/drivers/clk/jz47xx/jz4740-cgu.c @@ -20,10 +20,12 @@ #include #include #include +#include #include "jz47xx-cgu.h" /* CGU register offsets */ #define CGU_REG_CPCCR 0x00 +#define CGU_REG_LCR 0x04 #define CGU_REG_CPPCR 0x10 #define CGU_REG_I2SCDR 0x60 #define CGU_REG_LPCDR 0x64 @@ -42,6 +44,9 @@ #define PLLCTL_BYPASS (1 << 9) #define PLLCTL_ENABLE (1 << 8) +/* bits within the LCR register */ +#define LCR_SLEEP (1 << 0) + static struct jz47xx_cgu *cgu; static const s8 pll_od_encoding[4] = { @@ -217,3 +222,20 @@ static void __init jz4740_cgu_init(struct device_node *np) pr_err("%s: failed to register CGU Clocks\n", __func__); } CLK_OF_DECLARE(jz4740_cgu, "ingenic,jz4740-cgu", jz4740_cgu_init); + +void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode) +{ + uint32_t lcr = readl(cgu->base + CGU_REG_LCR); + + switch (mode) { + case JZ4740_WAIT_MODE_IDLE: + lcr &= ~LCR_SLEEP; + break; + + case JZ4740_WAIT_MODE_SLEEP: + lcr |= LCR_SLEEP; + break; + } + + writel(lcr, cgu->base + CGU_REG_LCR); +} -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/