Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1162050AbbBDSkH (ORCPT ); Wed, 4 Feb 2015 13:40:07 -0500 Received: from foss-mx-na.foss.arm.com ([217.140.108.86]:41604 "EHLO foss-mx-na.foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161632AbbBDSbQ (ORCPT ); Wed, 4 Feb 2015 13:31:16 -0500 From: Morten Rasmussen To: peterz@infradead.org, mingo@redhat.com Cc: vincent.guittot@linaro.org, dietmar.eggemann@arm.com, yuyang.du@intel.com, preeti@linux.vnet.ibm.com, mturquette@linaro.org, nico@linaro.org, rjw@rjwysocki.net, juri.lelli@arm.com, linux-kernel@vger.kernel.org, Russell King Subject: [RFCv3 PATCH 16/48] arm: Cpu invariant scheduler load-tracking support Date: Wed, 4 Feb 2015 18:30:53 +0000 Message-Id: <1423074685-6336-17-git-send-email-morten.rasmussen@arm.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1423074685-6336-1-git-send-email-morten.rasmussen@arm.com> References: <1423074685-6336-1-git-send-email-morten.rasmussen@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5763 Lines: 163 From: Dietmar Eggemann Reuses the existing infrastructure for cpu_scale to provide the scheduler with a cpu scaling correction factor for more accurate load-tracking. This factor comprises a micro-architectural part, which is based on the cpu efficiency value of a cpu as well as a platform-wide max frequency part, which relates to the dtb property clock-frequency of a cpu node. The calculation of cpu_scale, return value of arch_scale_cpu_capacity, changes from: capacity / middle_capacity with capacity = (clock_frequency >> 20) * cpu_efficiency to: SCHED_CAPACITY_SCALE * cpu_perf / max_cpu_perf The range of the cpu_scale value changes from [0..3*SCHED_CAPACITY_SCALE/2] to [0..SCHED_CAPACITY_SCALE]. The functionality to calculate the middle_capacity which corresponds to an 'average' cpu has been taken out since the scaling is now done differently. In the case that either the cpu efficiency or the clock-frequency value for a cpu is missing, no cpu scaling is done for any cpu. The platform-wide max frequency part of the factor should not be confused with the frequency invariant scheduler load-tracking support which deals with frequency related scaling due to DFVS functionality on a cpu. Cc: Russell King Signed-off-by: Dietmar Eggemann --- arch/arm/kernel/topology.c | 64 +++++++++++++++++----------------------------- 1 file changed, 23 insertions(+), 41 deletions(-) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index a1274e6..34ecbdc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -62,9 +62,7 @@ struct cpu_efficiency { * Table of relative efficiency of each processors * The efficiency value must fit in 20bit and the final * cpu_scale value must be in the range - * 0 < cpu_scale < 3*SCHED_CAPACITY_SCALE/2 - * in order to return at most 1 when DIV_ROUND_CLOSEST - * is used to compute the capacity of a CPU. + * 0 < cpu_scale < SCHED_CAPACITY_SCALE. * Processors that are not defined in the table, * use the default SCHED_CAPACITY_SCALE value for cpu_scale. */ @@ -77,24 +75,18 @@ static const struct cpu_efficiency table_efficiency[] = { static unsigned long *__cpu_capacity; #define cpu_capacity(cpu) __cpu_capacity[cpu] -static unsigned long middle_capacity = 1; +static unsigned long max_cpu_perf; /* * Iterate all CPUs' descriptor in DT and compute the efficiency - * (as per table_efficiency). Also calculate a middle efficiency - * as close as possible to (max{eff_i} - min{eff_i}) / 2 - * This is later used to scale the cpu_capacity field such that an - * 'average' CPU is of middle capacity. Also see the comments near - * table_efficiency[] and update_cpu_capacity(). + * (as per table_efficiency). Calculate the max cpu performance too. */ + static void __init parse_dt_topology(void) { const struct cpu_efficiency *cpu_eff; struct device_node *cn = NULL; - unsigned long min_capacity = ULONG_MAX; - unsigned long max_capacity = 0; - unsigned long capacity = 0; - int cpu = 0; + int cpu = 0, i = 0; __cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity), GFP_NOWAIT); @@ -102,6 +94,7 @@ static void __init parse_dt_topology(void) for_each_possible_cpu(cpu) { const u32 *rate; int len; + unsigned long cpu_perf; /* too early to use cpu->of_node */ cn = of_get_cpu_node(cpu, NULL); @@ -124,46 +117,35 @@ static void __init parse_dt_topology(void) continue; } - capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency; - - /* Save min capacity of the system */ - if (capacity < min_capacity) - min_capacity = capacity; - - /* Save max capacity of the system */ - if (capacity > max_capacity) - max_capacity = capacity; - - cpu_capacity(cpu) = capacity; + cpu_perf = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency; + cpu_capacity(cpu) = cpu_perf; + max_cpu_perf = max(max_cpu_perf, cpu_perf); + i++; } - /* If min and max capacities are equals, we bypass the update of the - * cpu_scale because all CPUs have the same capacity. Otherwise, we - * compute a middle_capacity factor that will ensure that the capacity - * of an 'average' CPU of the system will be as close as possible to - * SCHED_CAPACITY_SCALE, which is the default value, but with the - * constraint explained near table_efficiency[]. - */ - if (4*max_capacity < (3*(max_capacity + min_capacity))) - middle_capacity = (min_capacity + max_capacity) - >> (SCHED_CAPACITY_SHIFT+1); - else - middle_capacity = ((max_capacity / 3) - >> (SCHED_CAPACITY_SHIFT-1)) + 1; - + if (i < num_possible_cpus()) + max_cpu_perf = 0; } /* * Look for a customed capacity of a CPU in the cpu_capacity table during the * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the - * function returns directly for SMP system. + * function returns directly for SMP systems or if there is no complete set + * of cpu efficiency, clock frequency data for each cpu. */ static void update_cpu_capacity(unsigned int cpu) { - if (!cpu_capacity(cpu)) + unsigned long capacity = cpu_capacity(cpu); + + if (!capacity || !max_cpu_perf) { + cpu_capacity(cpu) = 0; return; + } + + capacity *= SCHED_CAPACITY_SCALE; + capacity /= max_cpu_perf; - set_capacity_scale(cpu, cpu_capacity(cpu) / middle_capacity); + set_capacity_scale(cpu, capacity); pr_info("CPU%u: update cpu_capacity %lu\n", cpu, arch_scale_cpu_capacity(NULL, cpu)); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/