Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756462AbbBEAyq (ORCPT ); Wed, 4 Feb 2015 19:54:46 -0500 Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:36911 "EHLO mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756310AbbBEAx6 (ORCPT ); Wed, 4 Feb 2015 19:53:58 -0500 X-IronPort-AV: E=Sophos;i="5.09,521,1418112000"; d="scan'208";a="56223135" From: Ray Jui To: Mike Turquette , Stephen Boyd , Matt Porter , Alex Elder , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Russell King , Arnd Bergmann CC: , , Scott Branden , Dmitry Torokhov , Anatol Pomazau , , , Ray Jui Subject: [PATCH v5 5/6] clk: cygnus: add clock support for Broadcom Cygnus Date: Wed, 4 Feb 2015 16:55:04 -0800 Message-ID: <1423097705-22939-6-git-send-email-rjui@broadcom.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1423097705-22939-1-git-send-email-rjui@broadcom.com> References: <1423097705-22939-1-git-send-email-rjui@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13651 Lines: 386 The Broadcom Cygnus SoC is architected under the iProc architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, MIPIPLL, all dervied from an onboard crystal. Cygnus also has various ASIU clocks that are derived directly from the onboard crystal. Signed-off-by: Ray Jui Reviewed-by: Scott Branden --- drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-cygnus.c | 277 ++++++++++++++++++++++++++++++++ include/dt-bindings/clock/bcm-cygnus.h | 65 ++++++++ 3 files changed, 343 insertions(+) create mode 100644 drivers/clk/bcm/clk-cygnus.c create mode 100644 include/dt-bindings/clock/bcm-cygnus.h diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 6926636..afcbe55 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-clk.o clk-iproc-asiu.o +obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c new file mode 100644 index 0000000..f1dbfd7 --- /dev/null +++ b/drivers/clk/bcm/clk-cygnus.c @@ -0,0 +1,277 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "clk-iproc.h" + +#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, } + +#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \ + .pwr_shift = ps, .iso_shift = is } + +#define asiu_div_val(o, es, hs, hw, ls, lw) \ + { .offset = o, .en_shift = es, .high_shift = hs, \ + .high_width = hw, .low_shift = ls, .low_width = lw } + +#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \ + .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \ + .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \ + .ka_width = kaw } + +#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo } + +#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \ + .hold_shift = hs, .bypass_shift = bs } + +#define asiu_gate_val(o, es) { .offset = o, .en_shift = es } + +static void __init cygnus_armpll_init(struct device_node *node) +{ + iproc_armpll_setup(node); +} +CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init); + +static const struct iproc_pll_ctrl genpll = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC, + .aon = aon_val(0x0, 2, 1, 0), + .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3), + .ndiv_int = reg_val(0x10, 20, 10), + .ndiv_frac = reg_val(0x10, 0, 20), + .pdiv = reg_val(0x14, 0, 4), + .vco_ctrl = vco_ctrl_val(0x18, 0x1c), + .status = reg_val(0x28, 12, 1), +}; + +static void __init cygnus_genpll_init(struct device_node *node) +{ + iproc_pll_setup(node, &genpll, NULL, 0); +} +CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_init); + +static const struct iproc_pll_ctrl lcpll0 = { + .flags = IPROC_CLK_AON, + .aon = aon_val(0x0, 2, 5, 4), + .reset = reset_val(0x0, 31, 30, 27, 3, 23, 4, 19, 4), + .ndiv_int = reg_val(0x4, 16, 10), + .pdiv = reg_val(0x4, 26, 4), + .vco_ctrl = vco_ctrl_val(0x10, 0x14), + .status = reg_val(0x18, 12, 1), +}; + +static void __init cygnus_lcpll0_init(struct device_node *node) +{ + iproc_pll_setup(node, &lcpll0, NULL, 0); +} +CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_init); + +/* + * MIPI PLL VCO frequency parameter table + */ +static const struct iproc_pll_vco_freq_param mipipll_vco_params[] = { + /* rate (Hz) ndiv_int ndiv_frac pdiv */ + { 750000000UL, 30, 0, 1 }, + { 1000000000UL, 40, 0, 1 }, + { 1350000000ul, 54, 0, 1 }, + { 2000000000UL, 80, 0, 1 }, + { 2100000000UL, 84, 0, 1 }, + { 2250000000UL, 90, 0, 1 }, + { 2500000000UL, 100, 0, 1 }, + { 2700000000UL, 54, 0, 0 }, + { 2975000000UL, 119, 0, 1 }, + { 3100000000UL, 124, 0, 1 }, + { 3150000000UL, 126, 0, 1 }, +}; + +static const struct iproc_pll_ctrl mipipll = { + .flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC, + .aon = aon_val(0x0, 4, 17, 16), + .asiu = asiu_gate_val(0x0, 3), + .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 4), + .ndiv_int = reg_val(0x10, 20, 10), + .ndiv_frac = reg_val(0x10, 0, 20), + .pdiv = reg_val(0x14, 0, 4), + .vco_ctrl = vco_ctrl_val(0x18, 0x1c), + .status = reg_val(0x28, 12, 1), +}; + +static void __init cygnus_mipipll_init(struct device_node *node) +{ + iproc_pll_setup(node, &mipipll, mipipll_vco_params, + ARRAY_SIZE(mipipll_vco_params)); +} +CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_init); + +static const struct iproc_clk_ctrl genpll_clk[] = { + [BCM_CYGNUS_GENPLL_AXI21_CLK] = { + .channel = BCM_CYGNUS_GENPLL_AXI21_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x4, 6, 0, 12), + .mdiv = reg_val(0x20, 0, 8), + }, + [BCM_CYGNUS_GENPLL_250MHZ_CLK] = { + .channel = BCM_CYGNUS_GENPLL_250MHZ_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x4, 7, 1, 13), + .mdiv = reg_val(0x20, 10, 8), + }, + [BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = { + .channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x4, 8, 2, 14), + .mdiv = reg_val(0x20, 20, 8), + }, + [BCM_CYGNUS_GENPLL_ENET_SW_CLK] = { + .channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x4, 9, 3, 15), + .mdiv = reg_val(0x24, 0, 8), + }, + [BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = { + .channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x4, 10, 4, 16), + .mdiv = reg_val(0x24, 10, 8), + }, + [BCM_CYGNUS_GENPLL_CAN_CLK] = { + .channel = BCM_CYGNUS_GENPLL_CAN_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x4, 11, 5, 17), + .mdiv = reg_val(0x24, 20, 8), + }, +}; + +static void __init cygnus_genpll_clk_init(struct device_node *node) +{ + iproc_clk_setup(node, genpll_clk, ARRAY_SIZE(genpll_clk)); +} +CLK_OF_DECLARE(cygnus_genpll_clk, "brcm,cygnus-genpll-clk", + cygnus_genpll_clk_init); + +static const struct iproc_clk_ctrl lcpll0_clk[] = { + [BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = { + .channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x0, 7, 1, 13), + .mdiv = reg_val(0x8, 0, 8), + }, + [BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = { + .channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x0, 8, 2, 14), + .mdiv = reg_val(0x8, 10, 8), + }, + [BCM_CYGNUS_LCPLL0_SDIO_CLK] = { + .channel = BCM_CYGNUS_LCPLL0_SDIO_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x0, 9, 3, 15), + .mdiv = reg_val(0x8, 20, 8), + }, + [BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = { + .channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x0, 10, 4, 16), + .mdiv = reg_val(0xc, 0, 8), + }, + [BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = { + .channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x0, 11, 5, 17), + .mdiv = reg_val(0xc, 10, 8), + }, + [BCM_CYGNUS_LCPLL0_CH5_UNUSED] = { + .channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = enable_val(0x0, 12, 6, 18), + .mdiv = reg_val(0xc, 20, 8), + }, +}; + +static void __init cygnus_lcpll0_clk_init(struct device_node *node) +{ + iproc_clk_setup(node, lcpll0_clk, ARRAY_SIZE(lcpll0_clk)); +} +CLK_OF_DECLARE(cygnus_lcpll0_clk, "brcm,cygnus-lcpll0-clk", + cygnus_lcpll0_clk_init); + +static const struct iproc_clk_ctrl mipipll_clk[] = { + [BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = { + .channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED, + .enable = enable_val(0x4, 12, 6, 18), + .mdiv = reg_val(0x20, 0, 8), + }, + [BCM_CYGNUS_MIPIPLL_CH1_LCD] = { + .channel = BCM_CYGNUS_MIPIPLL_CH1_LCD, + .enable = enable_val(0x4, 13, 7, 19), + .mdiv = reg_val(0x20, 10, 8), + }, + [BCM_CYGNUS_MIPIPLL_CH2_V3D] = { + .channel = BCM_CYGNUS_MIPIPLL_CH2_V3D, + .enable = enable_val(0x4, 14, 8, 20), + .mdiv = reg_val(0x20, 20, 8), + }, + [BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = { + .channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED, + .enable = enable_val(0x4, 15, 9, 21), + .mdiv = reg_val(0x24, 0, 8), + }, + [BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = { + .channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED, + .enable = enable_val(0x4, 16, 10, 22), + .mdiv = reg_val(0x24, 10, 8), + }, + [BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = { + .channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED, + .enable = enable_val(0x4, 17, 11, 23), + .mdiv = reg_val(0x24, 20, 8), + }, +}; + +static void __init cygnus_mipipll_clk_init(struct device_node *node) +{ + iproc_clk_setup(node, mipipll_clk, ARRAY_SIZE(mipipll_clk)); +} +CLK_OF_DECLARE(cygnus_mipipll_clk, "brcm,cygnus-mipipll-clk", + cygnus_mipipll_clk_init); + +static const struct iproc_asiu_div asiu_div[] = { + [BCM_CYGNUS_ASIU_KEYPAD_CLK] = + asiu_div_val(0x0, 31, 16, 10, 0, 10), + [BCM_CYGNUS_ASIU_ADC_CLK] = + asiu_div_val(0x4, 31, 16, 10, 0, 10), + [BCM_CYGNUS_ASIU_PWM_CLK] = + asiu_div_val(0x8, 31, 16, 10, 0, 10), +}; + +static const struct iproc_asiu_gate asiu_gate[] = { + [BCM_CYGNUS_ASIU_KEYPAD_CLK] = + asiu_gate_val(0x0, 7), + [BCM_CYGNUS_ASIU_ADC_CLK] = + asiu_gate_val(0x0, 9), + [BCM_CYGNUS_ASIU_PWM_CLK] = + asiu_gate_val(IPROC_CLK_INVALID_OFFSET, 0), +}; + +static void __init cygnus_asiu_init(struct device_node *node) +{ + iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div)); +} +CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init); diff --git a/include/dt-bindings/clock/bcm-cygnus.h b/include/dt-bindings/clock/bcm-cygnus.h new file mode 100644 index 0000000..9d30582 --- /dev/null +++ b/include/dt-bindings/clock/bcm-cygnus.h @@ -0,0 +1,65 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CLOCK_BCM_CYGNUS_H +#define _CLOCK_BCM_CYGNUS_H + +/* GENPLL clock channel ID */ +#define BCM_CYGNUS_GENPLL_AXI21_CLK 0 +#define BCM_CYGNUS_GENPLL_250MHZ_CLK 1 +#define BCM_CYGNUS_GENPLL_IHOST_SYS_CLK 2 +#define BCM_CYGNUS_GENPLL_ENET_SW_CLK 3 +#define BCM_CYGNUS_GENPLL_AUDIO_125_CLK 4 +#define BCM_CYGNUS_GENPLL_CAN_CLK 5 + +/* LCPLL0 clock channel ID */ +#define BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK 0 +#define BCM_CYGNUS_LCPLL0_DDR_PHY_CLK 1 +#define BCM_CYGNUS_LCPLL0_SDIO_CLK 2 +#define BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK 3 +#define BCM_CYGNUS_LCPLL0_SMART_CARD_CLK 4 +#define BCM_CYGNUS_LCPLL0_CH5_UNUSED 5 + +/* MIPI PLL clock channel ID */ +#define BCM_CYGNUS_MIPIPLL_CH0_UNUSED 0 +#define BCM_CYGNUS_MIPIPLL_CH1_LCD 1 +#define BCM_CYGNUS_MIPIPLL_CH2_V3D 2 +#define BCM_CYGNUS_MIPIPLL_CH3_UNUSED 3 +#define BCM_CYGNUS_MIPIPLL_CH4_UNUSED 4 +#define BCM_CYGNUS_MIPIPLL_CH5_UNUSED 5 + +/* ASIU clock IDs */ +#define BCM_CYGNUS_ASIU_KEYPAD_CLK 0 +#define BCM_CYGNUS_ASIU_ADC_CLK 1 +#define BCM_CYGNUS_ASIU_PWM_CLK 2 + +#endif /* _CLOCK_BCM_CYGNUS_H */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/