Message-ID: <54D53BA5.2020908@opensource.altera.com>
Date: Fri, 6 Feb 2015 16:09:41 -0600
From: Thor Thayer <tthayer@opensource.altera.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
MIME-Version: 1.0
To: Mark Rutland <mark.rutland@arm.com>
CC: "bp@alien8.de" <bp@alien8.de>,
        "dougthompson@xmission.com" <dougthompson@xmission.com>,
        "m.chehab@samsung.com" <m.chehab@samsung.com>,
        "robh+dt@kernel.org" <robh+dt@kernel.org>,
        Pawel Moll <Pawel.Moll@arm.com>,
        "ijc+devicetree@hellion.org.uk" <ijc+devicetree@hellion.org.uk>,
        "galak@codeaurora.org" <galak@codeaurora.org>,
        "linux@arm.linux.org.uk" <linux@arm.linux.org.uk>,
        "dinguyen@opensource.altera.com" <dinguyen@opensource.altera.com>,
        "grant.likely@linaro.org" <grant.likely@linaro.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
        "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
        "tthayer.linux@gmail.com" <tthayer.linux@gmail.com>
Subject: Re: [PATCHv6 4/5] edac: altera: Add Altera L2 Cache and OCRAM EDAC
 Support
References: <1420772036-3112-1-git-send-email-tthayer@opensource.altera.com> <1420772036-3112-5-git-send-email-tthayer@opensource.altera.com> <20150206191758.GE10324@leverpostej>
In-Reply-To: <20150206191758.GE10324@leverpostej>
Content-Type: text/plain; charset="windows-1252"; format=flowed
Content-Transfer-Encoding: 7bit
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 06 Feb 2015 22:09:37.7704 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM2PR0301MB0639
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 8139
Lines: 230


On 02/06/2015 01:17 PM, Mark Rutland wrote:
> On Fri, Jan 09, 2015 at 02:53:55AM +0000, tthayer@opensource.altera.com wrote:
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> Adding L2 Cache and On-Chip RAM EDAC support for the
>> Altera SoCs using the EDAC device  model. The SDRAM
>> controller is using the Memory Controller model.
>>
>> Each type of ECC is individually configurable.
>>
>> The SDRAM ECC is a separate Kconfig option because:
>> 1) the SDRAM preparation can take almost 2 seconds on boot and some
>> customers need a faster boot time.
>> 2) the SDRAM has an ECC initialization dependency on the preloader
>> which is outside the kernel. It is desirable to be able to turn the
>> SDRAM on & off separately.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>> ---
>> v2: Fix L2 dependency comments.
>>
>> v3: Move OCRAM and L2 cache EDAC functions into altera_edac.c
>>      instead of separate files.
>>
>> v4: Change mask defines to use BIT().
>>      Fix comment style to agree with kernel coding style.
>>      Better printk description for read != write in trigger.
>>      Remove SysFS debugging message.
>>      Better dci->mod_name
>>      Move gen_pool pointer assignment to end of function.
>>      Invert logic to reduce indent in ocram depenency check.
>>      Change from dev_err() to edac_printk()
>>      Replace magic numbers with defines & comments.
>>      Improve error injection test.
>>      Change Makefile intermediary name to altr (from alt)
>>
>> v5: No change.
>>
>> v6: Convert to nested EDAC in device tree. Force L2 cache
>>      on for L2Cache ECC & remove L2 cache syscon for checking
>>      enable bit. Update year in header.
>> ---
>>   drivers/edac/Kconfig       |   16 ++
>>   drivers/edac/Makefile      |    5 +-
>>   drivers/edac/altera_edac.c |  506 +++++++++++++++++++++++++++++++++++++++++++-
>>   3 files changed, 524 insertions(+), 3 deletions(-)
>
> [...]
>
>> +/************************* EDAC Parent Probe *************************/
>> +
>> +static const struct of_device_id altr_edac_device_of_match[];
>
> Huh? What's this for?

I needed this as a parameter for the of_platform_populate() function in 
altr_edac_probe(). I will change the naming to prevent misunderstanding.

>
>> +static const struct of_device_id altr_edac_of_match[] = {
>> +       { .compatible = "altr,edac" },
>> +       {},
>> +};
>> +MODULE_DEVICE_TABLE(of, altr_edac_of_match);
>
> I know it may seem like a minor thing, but the documentation really
> should have come in an earlier patch. It's painful to review a patch
> series when you have to randomly just to the end of hte series to see
> the documentation.
>
> The name is _very_ generic here. Do we not have a more specific name for
> the EDAC block in your SoC?
>
> Is there actually a specific EDAC device, or are you just grouping some
> portions of HW blocks into an EDAC device to match what the Linux EDAC
> framework wants?
>
> [...]
>

Yes, I can move the documentation - I understand better from the 5/5 
email what you are looking for.

I can change the name to ECC Manager. There are a group of consecutive 
registers to enable and disable ECC for peripherals. Unfortunately, the 
SDRAM register is in a completely different area (not grouped with these 
peripherals) and seems better suited to the Memory Controller EDAC 
instead of a device EDAC for the peripherals.

There is not a specific EDAC device. I grouped these HW blocks into 
different instances of an EDAC device to match what I though the Linux 
EDAC framework wanted.

>> +ssize_t altr_edac_device_trig(struct edac_device_ctl_info *edac_dci,
>> +                             const char *buffer, size_t count)
>> +{
>> +       u32 *ptemp, i, error_mask;
>> +       int result = 0;
>> +       unsigned long flags;
>> +       struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
>> +       const struct edac_device_prv_data *priv = drvdata->data;
>> +       void *generic_ptr = edac_dci->dev;
>
> Huh? What's hidden behind this "generic_ptr"?
>

There are 2 memory allocation functions (ocram & L2) that return a 
pointer to the data. The OCRAM allocation function returns the gen_pool 
pointer in the generic_ptr so that it can be freed later.

>> +
>> +       if (!priv->alloc_mem)
>> +               return -ENOMEM;
>> +
>> +       /*
>> +        * Note that generic_ptr is initialized to the device * but in
>> +        * some alloc_functions, this is overridden and returns data.
>> +        */
>> +       ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
>> +       if (!ptemp) {
>> +               edac_printk(KERN_ERR, EDAC_DEVICE,
>> +                           "Inject: Buffer Allocation error\n");
>> +               return -ENOMEM;
>> +       }
>> +
>> +       if (buffer[0] == ALTR_UE_TRIGGER_CHAR)
>> +               error_mask = priv->ue_set_mask;
>> +       else
>> +               error_mask = priv->ce_set_mask;
>> +
>> +       edac_printk(KERN_ALERT, EDAC_DEVICE,
>> +                   "Trigger Error Mask (0x%X)\n", error_mask);
>> +
>> +       local_irq_save(flags);
>> +       /* write ECC corrupted data out. */
>> +       for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) {
>> +               /* Read data so we're in the correct state */
>> +               rmb();
>> +               if (ACCESS_ONCE(ptemp[i]))
>> +                       result = -1;
>
> Perhaps s/result/err/? You could even have an err_count, which would
> give you slightly more useful output.

No problem.

>
>> +               /* Toggle Error bit (it is latched), leave ECC enabled */
>> +               writel(error_mask, drvdata->base);
>> +               writel(priv->ecc_enable_mask, drvdata->base);
>> +               ptemp[i] = i;
>> +       }
>> +       /* Ensure it has been written out */

<snip>

>> +
>> +       sram_addr = (void *)gen_pool_alloc(gp, size / sizeof(size_t));
>
> I'm still very much confused by this sizeof(size_t) division, but
> hopefully your response to my earlier query will answer that.
>
> [...]

Yes, my mistake.

>
>> +static void *l2_alloc_mem(size_t size, void **other)
>> +{
>> +       struct device *dev = *other;
>> +       void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);
>> +
>> +       if (!ptemp)
>> +               return NULL;
>> +
>> +       /* Make sure everything is written out */
>> +       wmb();
>> +
>> +       /*
>> +        * Clean all cache levels up to LoC (includes L2)
>> +        * This ensures the corrupted data is written into
>> +        * L2 cache for readback test (which causes ECC error).
>> +        */
>> +       flush_cache_all();
>
> I'm a little confused by this comment (especially w.r.t. the L2 being
> before the LoC). Are we attempting to flush everything _to_ the L2, or
> beyond/out-of the L2? As far as I can see flush_cache_all will only
> achieve the former, and not the latter, as it doesn't seem to perform
> any outer cache operations.
>
> Per the architecture, Set/Way maintenance of this form won't always act
> as you expect (though I believe that for Cortex-A9 it does).
>

Yes, these functions are for triggering an ECC error for testing L2 
cache reads. I need to ensure the cleared data is written to L2 cache 
because that is what I'm testing. The PL310 manual said the L2 cache was 
included in the LoC.

Our SoC is a Cortex-A9 but if there is a better way, I'm open to it.

>> +
>> +       return ptemp;
>> +}
>> +
>> +static void l2_free_mem(void *p, size_t size, void *other)
>> +{
>> +       struct device *dev = other;
>> +
>> +       if (dev && p)
>> +               devm_kfree(dev, p);
>
> Is this ever called in that case?

Yes, in altr_edac_device_trig(), the memory is allocated, the ECC errors 
are injected, the data is read back causing ECC error interrupts and the 
memory is freed. Would the standard kzalloc() and kfree() be betteer?

>
> Thanks,
> Mark.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/