Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 5 Jan 2003 13:43:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 5 Jan 2003 13:43:54 -0500 Received: from ulima.unil.ch ([130.223.144.143]:31673 "EHLO ulima.unil.ch") by vger.kernel.org with ESMTP id ; Sun, 5 Jan 2003 13:43:52 -0500 Date: Sun, 5 Jan 2003 19:52:27 +0100 From: Gregoire Favre To: "Justin T. Gibbs" Cc: linux-kernel@vger.kernel.org Subject: Re: 2.5.54 problem with IDE ICH4 and aic7xxx Message-ID: <20030105185227.GA9906@ulima.unil.ch> References: <20030105165441.GA8215@ulima.unil.ch> <486950000.1041788147@aslan.scsiguy.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <486950000.1041788147@aslan.scsiguy.com> User-Agent: Mutt/1.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4167 Lines: 93 On Sun, Jan 05, 2003 at 10:35:47AM -0700, Justin T. Gibbs wrote: > Does the problem persist if you disable domain > validation via SCSI-Select on your 29160? Well, I put in http://ulima.unil.ch/greg/linux/2.5.54/dmesg-2.5.54-2 the new result: it's really worse: aic7xxx: PCI Device 3:3:0 failed memory mapped test. Using PIO. scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit) (scsi1:A:1:0): refuses WIDE negotiation. Using 8bit transfers (scsi1:A:1): 10.000MB/s transfers (10.000MHz, offset 15) (scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 8) (scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 8) (scsi0:A:15): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Vendor: SEAGATE Model: ST336706LW Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:15:0: Tagged Queuing enabled. Depth 253 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25 aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs scsi1:A:10:0: DV failed to configure device. Please file a bug report against this driver. Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 SCSI device sda: drive cache: write through SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: drive cache: write back SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) /dev/scsi/host0/bus0/target15/lun0: p1 p2 Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0 sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0 sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0 device class 'input': registering register interface 'mouse' with class 'input' I still have the : aic7xxx: PCI Device 3:3:0 failed memory mapped test. Using PIO. But now I have the: scsi1:A:10:0: DV failed to configure device. Please file a bug report against this driver. But I don't know what that mean... cat /proc/scsi/scsi gives me: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 15 Lun: 00 Vendor: SEAGATE Model: ST336706LW Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 00 Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 03 Lun: 00 Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 Thank you very much, Gr?goire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/