Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759486AbbBIG5J (ORCPT ); Mon, 9 Feb 2015 01:57:09 -0500 Received: from regular1.263xmail.com ([211.150.99.130]:60814 "EHLO regular1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753238AbbBIG5G (ORCPT ); Mon, 9 Feb 2015 01:57:06 -0500 X-263anti-spam: KSV:0; X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-ADDR-CHECKED: 0 X-RL-SENDER: addy.ke@rock-chips.com X-FST-TO: ulf.hansson@linaro.org X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: addy.ke@rock-chips.com X-UNIQUE-TAG: <0abdc306a09943a08fa5d774706f373d> X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 Message-ID: <54D85A2F.1090301@rock-chips.com> Date: Mon, 09 Feb 2015 14:56:47 +0800 From: Addy User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: Ulf Hansson CC: Rob Herring , =?UTF-8?B?UGF3ZcWCIE1vbGw=?= , Mark Rutland , Ian Campbell , Kumar Gala , Randy Dunlap , "tgih.jun@samsung.com" , Jaehoon Chung , Chris Ball , Dinh Nguyen , =?UTF-8?B?SGVpa28gU3TDvGJuZXI=?= , Olof Johansson , Doug Anderson , Sonny Rao , Alexandru Stan , "devicetree@vger.kernel.org" , "linux-doc@vger.kernel.org" , "linux-kernel@vger.kernel.org" , linux-mmc , "linux-arm-kernel@lists.infradead.org" , "open list:ARM/Rockchip SoC..." , "zhenfu.fang" , Eddie Cai , lintao , chenfen , zyf , Jianqun Xu , Tao Huang , Chris Zhong , =?UTF-8?B?5aea5pm65oOF?= , Han Jiang , Kever Yang , zhangqing , Lin Huang Subject: Re: [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command' References: <1423134801-23219-1-git-send-email-addy.ke@rock-chips.com> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3772 Lines: 105 On 2015.02.09 12:51, Ulf Hansson wrote: > On 5 February 2015 at 12:13, Addy Ke wrote: >> Because of some uncertain factors, such as worse card or worse hardware, >> DAT[3:0](the data lines) may be pulled down by card, and mmc controller >> will be in busy state. This should not happend when mmc controller >> send command to update card clocks. If this happends, mci_send_cmd will >> be failed and we will get 'Timeout sending command', and then system will >> be blocked. To avoid this, we need reset mmc controller. >> >> Signed-off-by: Addy Ke > > Hi Addy, > > Should I consider $subject patch as a better option to the one below? No: This patch fix the bug, which can be found by script: cd /sys/bus/platform/drivers/dwmmc_rockchip for i in $(seq 1 10000); do echo "========================" $i echo ff0c0000.dwmmc > unbind sleep .5 echo ff0c0000.dwmmc > bind sleep 2 done > [PATCH] mmc: dw_mmc: rockchip: Add DW_MCI_QUIRK_RETRY_DELAY This patch is for tuning issue: we should delay until card go to idle state, when the previous command return error. > https://lkml.org/lkml/2015/1/13/562 > > Kind regards > Uffe > > >> --- >> drivers/mmc/host/dw_mmc.c | 23 +++++++++++++++++++++++ >> 1 file changed, 23 insertions(+) >> >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index 4d2e3c2..b1d6dfb 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -100,6 +100,7 @@ struct idmac_desc { >> }; >> #endif /* CONFIG_MMC_DW_IDMAC */ >> >> +static int dw_mci_card_busy(struct mmc_host *mmc); >> static bool dw_mci_reset(struct dw_mci *host); >> static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); >> >> @@ -888,6 +889,26 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg) >> cmd, arg, cmd_status); >> } >> >> +static void dw_mci_wait_busy(struct dw_mci_slot *slot) >> +{ >> + struct dw_mci *host = slot->host; >> + unsigned long timeout = jiffies + msecs_to_jiffies(500); >> + >> + while (time_before(jiffies, timeout)) { >> + if (!dw_mci_card_busy(slot->mmc)) >> + return; >> + } >> + dev_err(host->dev, "Data busy (status %#x)\n", >> + mci_readl(slot->host, STATUS)); >> + >> + /* >> + * Data busy, this should not happend when mmc controller send command >> + * to update card clocks in non-volt-switch state. If it happends, we >> + * should reset controller to avoid getting "Timeout sending command". >> + */ >> + dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS); >> +} >> + >> static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) >> { >> struct dw_mci *host = slot->host; >> @@ -899,6 +920,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) >> /* We must continue to set bit 28 in CMD until the change is complete */ >> if (host->state == STATE_WAITING_CMD11_DONE) >> sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH; >> + else >> + dw_mci_wait_busy(slot); >> >> if (!clock) { >> mci_writel(host, CLKENA, 0); >> -- >> 1.8.3.2 >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/