Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753449AbbBKQPp (ORCPT ); Wed, 11 Feb 2015 11:15:45 -0500 Received: from down.free-electrons.com ([37.187.137.238]:36400 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752013AbbBKQPn (ORCPT ); Wed, 11 Feb 2015 11:15:43 -0500 From: Antoine Tenart To: sebastian.hesselbarth@gmail.com, sameo@linux.intel.com, lee.jones@linaro.org, p.zabel@pengutronix.de, linus.walleij@linaro.org Cc: Antoine Tenart , jszhang@marvell.com, zmxu@marvell.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 00/11] ARM: berlin: refactor chip and system controllers Date: Wed, 11 Feb 2015 17:15:21 +0100 Message-Id: <1423671332-24580-1-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 2.3.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3673 Lines: 78 Hi, Marvell Berlin SoCs have a chip control register set providing several individual registers dealing with various controllers (pinctrl, reset, clk). This chip controller is described by a single DT node since the individual registers are spread among the chip control register bank. Marvell Berlin also have a system control register set providing several individual registers for pinctrl or adc. Prior to this series, there was no proper way of probing properly the devices using one of the chip and system controller nodes. The pinctrl driver was probed using the DT and the reset controller had an initcall. This series aims to handle these two nodes correctly, by introducing an MFD driver, the Berlin controller, to register all the devices described by the chip and system controller nodes. Syscon is also used to provide a regmap to the sub-node drivers, so that they can access the registers of the controllers safely. In addition, the clock driver will need the regmap early during the boot, so syscon is a good choice here. Reworks were done in the Berlin pin controller and in the Berlin reset driver, to take the changes into account (proper compatibles, syscon helpers, regmap use). The actual clock driver still works with these modifications, and a dedicated series will follow to convert the Berlin clock drivers to use the regmap provided by syscon. Tested on the Marvell BG2Q DMP. Thanks! Antoine Antoine Tenart (11): mfd: add the Berlin controller driver Documentation: bindings: add the Berlin controller documentation ARM: berlin: select MFD_BERLIN_CTRL reset: berlin: convert to a platform driver Documentation: bindings: move the Berlin reset documentation pinctrl: berlin: use the regmap provided by syscon pinctrl: berlin: use proper compatibles Documentation: bindings: move the Berlin pinctrl documentation ARM: berlin: rework chip and system controller nodes for BG2 ARM: berlin: rework chip and system controller nodes for BG2CD ARM: berlin: rework chip and system controller nodes for BG2Q .../devicetree/bindings/arm/marvell,berlin.txt | 76 --------- .../devicetree/bindings/mfd/berlin-ctrl.txt | 43 +++++ .../devicetree/bindings/pinctrl/berlin,pinctrl.txt | 43 +++++ .../devicetree/bindings/reset/berlin,reset.txt | 23 +++ arch/arm/boot/dts/berlin2.dtsi | 50 +++--- arch/arm/boot/dts/berlin2cd.dtsi | 32 ++-- arch/arm/boot/dts/berlin2q.dtsi | 70 ++++---- arch/arm/mach-berlin/Kconfig | 1 + drivers/mfd/Kconfig | 5 + drivers/mfd/Makefile | 2 + drivers/mfd/berlin-ctrl.c | 180 +++++++++++++++++++++ drivers/pinctrl/berlin/berlin-bg2.c | 26 +-- drivers/pinctrl/berlin/berlin-bg2cd.c | 26 +-- drivers/pinctrl/berlin/berlin-bg2q.c | 26 +-- drivers/pinctrl/berlin/berlin.c | 9 +- drivers/reset/reset-berlin.c | 69 +++----- 16 files changed, 429 insertions(+), 252 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/berlin-ctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt create mode 100644 Documentation/devicetree/bindings/reset/berlin,reset.txt create mode 100644 drivers/mfd/berlin-ctrl.c -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/