Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753837AbbBKQQ2 (ORCPT ); Wed, 11 Feb 2015 11:16:28 -0500 Received: from down.free-electrons.com ([37.187.137.238]:36470 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753723AbbBKQQY (ORCPT ); Wed, 11 Feb 2015 11:16:24 -0500 From: Antoine Tenart To: sebastian.hesselbarth@gmail.com Cc: Antoine Tenart , jszhang@marvell.com, zmxu@marvell.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 11/11] ARM: berlin: rework chip and system controller nodes for BG2Q Date: Wed, 11 Feb 2015 17:15:32 +0100 Message-Id: <1423671332-24580-12-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 2.3.0 In-Reply-To: <1423671332-24580-1-git-send-email-antoine.tenart@free-electrons.com> References: <1423671332-24580-1-git-send-email-antoine.tenart@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3324 Lines: 133 The chip and system controller nodes are now handled by the Berlin controller mfd driver. Its sub-devices are then registered by the mfd driver and let the drivers be probed properly, using their own sub-nodes. Rework the device tree to take this changes into account. Signed-off-by: Antoine Tenart --- arch/arm/boot/dts/berlin2q.dtsi | 70 ++++++++++++++++++++++++----------------- 1 file changed, 41 insertions(+), 29 deletions(-) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index e2f61f27944e..bd86d4121ec8 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -119,7 +119,7 @@ compatible = "marvell,berlin2-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; - resets = <&chip 0x104 14>; + resets = <&chip_rst 0x104 14>; status = "disabled"; }; @@ -137,7 +137,7 @@ compatible = "marvell,berlin2-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; - resets = <&chip 0x104 12>; + resets = <&chip_rst 0x104 12>; status = "disabled"; }; @@ -351,22 +351,30 @@ }; }; - chip: chip-control@ea0000 { - compatible = "marvell,berlin2q-chip-ctrl"; - #clock-cells = <1>; - #reset-cells = <2>; + chip: chip-controller@ea0000 { + compatible = "marvell,berlin2q-chip-ctrl", "syscon"; reg = <0xea0000 0x400>, <0xdd0170 0x10>; + #clock-cells = <1>; clocks = <&refclk>; clock-names = "refclk"; - twsi0_pmux: twsi0-pmux { - groups = "G6"; - function = "twsi0"; + soc_pinctrl: pin-controller { + compatible = "marvell,berlin2q-soc-pinctrl"; + + twsi0_pmux: twsi0-pmux { + groups = "G6"; + function = "twsi0"; + }; + + twsi1_pmux: twsi1-pmux { + groups = "G7"; + function = "twsi1"; + }; }; - twsi1_pmux: twsi1-pmux { - groups = "G7"; - function = "twsi1"; + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; }; }; @@ -517,28 +525,32 @@ }; }; - sysctrl: pin-controller@d000 { - compatible = "marvell,berlin2q-system-ctrl"; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2q-system-ctrl", "syscon"; reg = <0xd000 0x100>; - uart0_pmux: uart0-pmux { - groups = "GSM12"; - function = "uart0"; - }; + sys_pinctrl: pin-controller { + compatible = "marvell,berlin2q-system-pinctrl"; - uart1_pmux: uart1-pmux { - groups = "GSM14"; - function = "uart1"; - }; + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; - twsi2_pmux: twsi2-pmux { - groups = "GSM13"; - function = "twsi2"; - }; + uart1_pmux: uart1-pmux { + groups = "GSM14"; + function = "uart1"; + }; + + twsi2_pmux: twsi2-pmux { + groups = "GSM13"; + function = "twsi2"; + }; - twsi3_pmux: twsi3-pmux { - groups = "GSM14"; - function = "twsi3"; + twsi3_pmux: twsi3-pmux { + groups = "GSM14"; + function = "twsi3"; + }; }; }; -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/