Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751988AbbBMBPr (ORCPT ); Thu, 12 Feb 2015 20:15:47 -0500 Received: from mail-pa0-f41.google.com ([209.85.220.41]:47365 "EHLO mail-pa0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751317AbbBMBPL (ORCPT ); Thu, 12 Feb 2015 20:15:11 -0500 From: Moritz Fischer To: dbaryshkov@gmail.com Cc: dwmw2@infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Moritz Fischer Subject: [PATCH 1/2] power: reset: Add support for NI Ettus Research USRP E3x0 soft-poweroff. Date: Thu, 12 Feb 2015 17:14:39 -0800 Message-Id: <1423790080-8264-2-git-send-email-moritz.fischer@ettus.com> X-Mailer: git-send-email 1.9.3 In-Reply-To: <1423790080-8264-1-git-send-email-moritz.fischer@ettus.com> References: <1423790080-8264-1-git-send-email-moritz.fischer@ettus.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5509 Lines: 171 Signed-off-by: Moritz Fischer --- .../bindings/power/reset/e3x0-poweroff.txt | 16 ++++ drivers/power/reset/Kconfig | 10 +++ drivers/power/reset/Makefile | 1 + drivers/power/reset/e3x0-poweroff.c | 94 ++++++++++++++++++++++ 4 files changed, 121 insertions(+) diff --git a/Documentation/devicetree/bindings/power/reset/e3x0-poweroff.txt b/Documentation/devicetree/bindings/power/reset/e3x0-poweroff.txt new file mode 100644 index 0000000..df19998 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/e3x0-poweroff.txt @@ -0,0 +1,16 @@ +National Instruments Ettus Research USRP E3x0 poweroff driver + +This module is part of the NI Ettus Research USRP E3x0 SDR. + +Required properties: +- compatible: should be one of the following + - "ettus,e3x0-poweroff": For devices such as the NI Ettus Research USRP E3x0 +- reg: The registers to write to in order to trigger the poweroff. + +Note: Addresses may vary depending on the FPGA configuration + +Example: + poweroff0: poweroff@40300000 { + compatible = "ettus,e3x0-poweroff"; + reg = <0x40300000 0x04>; + }; diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 27f6646..e45029f 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -48,6 +48,16 @@ config POWER_RESET_BRCMSTB Say Y here if you have a Broadcom STB board and you wish to have restart support. +config POWER_RESET_E3X0 + tristate "NI Ettus Research USRP E3x0 soft poweroff driver." + default n + help + Say Y here to enable support for the NI Ettus Research + USRP E3x0 soft poweroff. + + To compile this driver as a module, chose M here: the + module will be called e3x0-reset. + config POWER_RESET_GPIO bool "GPIO power-off driver" depends on OF_GPIO diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 11de15b..eef50e9a 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o +obj-$(CONFIG_POWER_RESET_E3X0) += e3x0-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o diff --git a/drivers/power/reset/e3x0-poweroff.c b/drivers/power/reset/e3x0-poweroff.c new file mode 100644 index 0000000..3e6778a --- /dev/null +++ b/drivers/power/reset/e3x0-poweroff.c @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2015, National Instruments Corp. All rights reserved. + * + * Driver for NI Ettus Research USRP E3x0 soft power off. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +static const u32 E3X0_POWEROFF_REG_OFFSET = 0x0; +static const u32 E3X0_POWEROFF_MAGIC = 0x7a; + +struct e3x0_poweroff { + struct device *dev; + void * __iomem io_addr; +}; + +static struct e3x0_poweroff *e3x0_poweroff; + +static void e3x0_pm_power_off(void) +{ + writel(E3X0_POWEROFF_MAGIC, + e3x0_poweroff->io_addr + E3X0_POWEROFF_REG_OFFSET); +} + +static int e3x0_poweroff_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + + e3x0_poweroff = devm_kzalloc(dev, sizeof(*e3x0_poweroff), + GFP_KERNEL); + if (!e3x0_poweroff) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + e3x0_poweroff->dev = dev; + e3x0_poweroff->io_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(e3x0_poweroff->io_addr)) { + dev_err(dev, "Failed to ioremap registers\n"); + return PTR_ERR(e3x0_poweroff->io_addr); + } + + + if (!pm_power_off) + pm_power_off = e3x0_pm_power_off; + + return 0; +} + +static int e3x0_poweroff_remove(struct platform_device *pdev) +{ + if (pm_power_off == e3x0_pm_power_off) + pm_power_off = NULL; + e3x0_poweroff = NULL; + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id e3x0_poweroff_match[] = { + { .compatible = "ettus,e3x0-poweroff", }, + { }, +}; +MODULE_DEVICE_TABLE(of, e3x0_poweroff_match); +#endif + +static struct platform_driver e3x0_poweroff_driver = { + .driver = { + .name = "e3x0-poweroff", + .of_match_table = of_match_ptr(e3x0_poweroff_match), + }, + .probe = e3x0_poweroff_probe, + .remove = e3x0_poweroff_remove, +}; +module_platform_driver(e3x0_poweroff_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Moritz Fischer "); +MODULE_DESCRIPTION("NI Ettus Research USRP E3x0 soft-poweroff driver"); +MODULE_ALIAS("platform:e3x0-poweroff"); -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/