Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753358AbbBMQnH (ORCPT ); Fri, 13 Feb 2015 11:43:07 -0500 Received: from down.free-electrons.com ([37.187.137.238]:49334 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752823AbbBMQnF (ORCPT ); Fri, 13 Feb 2015 11:43:05 -0500 From: Antoine Tenart To: sebastian.hesselbarth@gmail.com, mturquette@linaro.org, sboyd@codeaurora.org Cc: Antoine Tenart , zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 0/7] ARM: berlin: refactor the clock Date: Fri, 13 Feb 2015 17:42:54 +0100 Message-Id: <1423845781-7480-1-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 2.3.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3095 Lines: 71 Hi, Marvell Berlin SoCs have a chip control register set providing several individual registers dealing with various controllers (pinctrl, reset, clk). This chip controller is described by a single DT node since the individual registers are spread among the chip control register bank. Marvell Berlin also have a system control register set providing several individual registers for pinctrl or adc. A series was sent[1] to correctly handle these two nodes, by introducing a Berlin mfd controller driver. The series converted the existing pin-controller and reset drivers to take the changes into account. Because the Berlin clock driver was still working with the above modification, Berlin clock reworks were not included into the previous series. Also the clock reworks change some of the clock framework functions, so having a dedicated series helps. This series aims to convert the Berlin clock driver to use the proper way of dealing with the chip and system controller on Berlin SoCs. To do this changes were done in the clk-mux and clk-gate helpers so they can handle regmaps alongside iomem addresses. This series has been tested on the Marvell Berlin BG2Q DMP. This series is based on v3.19 and [1]. Thanks! Antoine [1] https://lkml.org/lkml/2015/2/11/367 Antoine Tenart (7): clk: convert clock mux to accept regmap clk: convert clock gate to accept regmap clk: berlin: use regmap Documentation: bindings: move the Berlin clock documentation ARM: berlin: rework the clock node for BG2 ARM: berlin: rework the clock node for BG2CD ARM: berlin: rework the clock node for BG2Q .../devicetree/bindings/arm/marvell,berlin.txt | 35 ------- .../devicetree/bindings/clock/marvell,berlin.txt | 31 ++++++ arch/arm/boot/dts/berlin2.dtsi | 43 ++++---- arch/arm/boot/dts/berlin2cd.dtsi | 39 +++---- arch/arm/boot/dts/berlin2q.dtsi | 53 +++++----- drivers/clk/berlin/berlin2-avpll.c | 72 +++++++------ drivers/clk/berlin/berlin2-avpll.h | 13 ++- drivers/clk/berlin/berlin2-div.c | 82 +++++---------- drivers/clk/berlin/berlin2-div.h | 4 +- drivers/clk/berlin/berlin2-pll.c | 16 +-- drivers/clk/berlin/berlin2-pll.h | 7 +- drivers/clk/berlin/bg2.c | 112 +++++++++++---------- drivers/clk/berlin/bg2q.c | 64 +++++++----- drivers/clk/clk-gate.c | 94 +++++++++++++---- drivers/clk/clk-mux.c | 72 +++++++++++-- include/linux/clk-provider.h | 51 ++++++++-- 16 files changed, 467 insertions(+), 321 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,berlin.txt -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/