Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753035AbbBQSwo (ORCPT ); Tue, 17 Feb 2015 13:52:44 -0500 Received: from mail-we0-f180.google.com ([74.125.82.180]:34533 "EHLO mail-we0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752784AbbBQSwi (ORCPT ); Tue, 17 Feb 2015 13:52:38 -0500 From: Sebastian Hesselbarth To: Sebastian Hesselbarth Cc: Jason Cooper , Andrew Lunn , Gregory Clement , Gabriel Dobato , Wolfram Sang , Stephen Warren , linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 7/8] ARM: dts: dove: Add internal i2c multiplexer node Date: Tue, 17 Feb 2015 19:52:08 +0100 Message-Id: <1424199129-22099-8-git-send-email-sebastian.hesselbarth@gmail.com> In-Reply-To: <1424199129-22099-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1424199129-22099-1-git-send-email-sebastian.hesselbarth@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3098 Lines: 108 This adds a i2c-mux-pinctrl node to dove.dtsi for the internal i2c mux found on Dove SoCs. Up to now, we had no board using any of the two additional i2c busses, so make sure the change does not break any existing boards. Therefore, we rename the i2c-controller node label to "i2c" and enable it by default. Also, the dedicated sub-bus (now "i2c0") is enabled by default. The two optional sub-busses require additional external pin-muxing, so disable them by default. Signed-off-by: Sebastian Hesselbarth --- Wolfram, Actually, I was hoping that default pin hog mechanism (pinctrl-names = "default") could also be used from i2c mux nodes and devices. Anyway, I had a look at i2c-core/mux code and failed how to achieve that easily. Instead I decided, it would also be ok to put the pin hog into the i2c controller node where pins will be bound by standard platform device code. Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Gabriel Dobato Cc: Wolfram Sang Cc: Stephen Warren Cc: linux-i2c@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/dove.dtsi | 40 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 9ad829523a13..b3340e862b0e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -28,6 +28,42 @@ }; }; + i2c-mux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c>; + + pinctrl-names = "i2c0", "i2c1", "i2c2"; + pinctrl-0 = <&pmx_i2cmux_0>; + pinctrl-1 = <&pmx_i2cmux_1>; + pinctrl-2 = <&pmx_i2cmux_2>; + + i2c0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c1 on i2c controller node */ + status = "disabled"; + }; + + i2c2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c2 on i2c controller node */ + status = "disabled"; + }; + }; + l2: l2-cache { compatible = "marvell,tauros2-cache"; marvell,tauros2-cache-features = <0>; @@ -123,7 +159,7 @@ status = "disabled"; }; - i2c0: i2c-ctrl@11000 { + i2c: i2c-ctrl@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -132,7 +168,7 @@ clock-frequency = <400000>; timeout-ms = <1000>; clocks = <&core_clk 0>; - status = "disabled"; + status = "okay"; }; uart0: serial@12000 { -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/