Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752865AbbBRWIB (ORCPT ); Wed, 18 Feb 2015 17:08:01 -0500 Received: from mx1.redhat.com ([209.132.183.28]:38050 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752375AbbBRWH7 (ORCPT ); Wed, 18 Feb 2015 17:07:59 -0500 Date: Wed, 18 Feb 2015 17:07:48 -0500 From: Benjamin Tissoires To: jsanchezf Cc: josep.sanchez.ferreres@est.fib.upc.edu, ACHARD.Frederic.frederic.achard@free.fr, Peter Hutterer , Jiri Kosina , Ping Cheng , Jason Gerecke , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] HID: wacom: add full support of the Wacom Bamboo PAD Message-ID: <20150218220748.GF5928@mail.corp.redhat.com> References: <1424201233-4158-1-git-send-email-benjamin.tissoires@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10594 Lines: 280 On Feb 18 2015 or thereabouts, jsanchezf wrote: > Hello Benjamin > > Following your instructions I managed to compile and install the wacom > module properly (actually I had to run automake and autoconf to make it all > work but no problems after that). > > The stylus is working just fine now. Unfortunately the touch pad part > doesn't seem to be working at all, and Xorg isn't mapping it to an event > file like it used to. The stylus event file is not seeing any data when I > touch the pad either. > > By the way, I'm actually using the USB variant of the Bamboo Pad. > Yep, I know. That's why I asked you to test :) So could you run "sudo hid-recorder /dev/hidraw*" while making some inputs on the touchpad? I'd like to check if your touchpad is actually switched to the debug mode. Cheers, Benjamin > Looking at the log file from Xorg, though, I can see how it's properly > detecting the "Wacom USB Bamboo PAD Pen stylus" device and adding "Wacom > USB Bamboo PAD Pen touch" as an extended input device. Here's the full log: > http://pastebin.com/k3SqtQN5 > > I should mention I have no Xorg configuration done whatsoever besides the > monitor resolution setup (which is not really relevant > > > > 2015-02-17 20:27 GMT+01:00 Benjamin Tissoires >: > > > The stylus of this device works just fine out of the box. > > The touch is seen by default as a mouse with relative events and some > > gestures. > > Switching the default in raw mode allows us to retrieve the touch data > > and have a consistent user experience accross all the multitouch touchpads. > > > > Note that the buttons of this devices are reported through the touch > > interface. There is no 'Pad' interface. It seemed more natural to have > > the BTN_LEFT and BTN_RIGHT reported with the touch because they are > > placed under the touch interface and it looks like they belong to the > > touch part. > > > > Signed-off-by: Benjamin Tissoires > > --- > > > > Hi, > > > > several things before we can merge this: > > > > Josep, Frederic: > > Would you mind testing this patch with your Bamboo pads? I bought the > > wireless > > variant and the USB one has a different ProductID. Hopefully, it will go > > smoothly with the current patch. > > > > Peter, Ping, Jason: > > Given the nature of the device, I did not exported the 2 buttons as a > > separate > > pad device. > > Do you back me up with this choice? > > > > Jiri: > > As mentioned to Josep and Frederic, this has not been tested against the > > USB > > (wired) version of the device. So please wait at least for one tested-by > > before > > considering including this patch. > > > > Thanks everyone! > > Benjamin > > > > drivers/hid/wacom_sys.c | 23 ++++++++++++++++++ > > drivers/hid/wacom_wac.c | 62 > > +++++++++++++++++++++++++++++++++++++++++++++++++ > > drivers/hid/wacom_wac.h | 3 +++ > > 3 files changed, 88 insertions(+) > > > > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > > index e1ec192..ef4d147 100644 > > --- a/drivers/hid/wacom_sys.c > > +++ b/drivers/hid/wacom_sys.c > > @@ -410,6 +410,9 @@ static int wacom_query_tablet_data(struct hid_device > > *hdev, > > else if (features->type == WACOM_27QHDT) { > > return wacom_set_device_mode(hdev, 131, 3, 2); > > } > > + else if (features->type == BAMBOO_PAD) { > > + return wacom_set_device_mode(hdev, 2, 2, 3); > > + } > > } else if (features->device_type == BTN_TOOL_PEN) { > > if (features->type <= BAMBOO_PT && features->type != > > WIRELESS) { > > return wacom_set_device_mode(hdev, 2, 2, 2); > > @@ -1417,6 +1420,20 @@ static int wacom_probe(struct hid_device *hdev, > > goto fail_allocate_inputs; > > } > > > > + /* > > + * Bamboo Pad has a generic hid handling for the Pen, and we > > switch it > > + * into debug mode for the touch part. > > + * We ignore the other interfaces. > > + */ > > + if (features->type == BAMBOO_PAD) { > > + if (features->pktlen == WACOM_PKGLEN_PENABLED) { > > + features->type = HID_GENERIC; > > + } else if (features->pktlen != WACOM_PKGLEN_BP_TOUCH) { > > + error = -ENODEV; > > + goto fail_shared_data; > > + } > > + } > > + > > /* set the default size in case we do not get them from hid */ > > wacom_set_default_phy(features); > > > > @@ -1451,6 +1468,12 @@ static int wacom_probe(struct hid_device *hdev, > > features->y_max = 4096; > > } > > > > + /* > > + * Same thing for Bamboo PAD > > + */ > > + if (features->type == BAMBOO_PAD) > > + features->device_type = BTN_TOOL_FINGER; > > + > > if (hdev->bus == BUS_BLUETOOTH) > > features->quirks |= WACOM_QUIRK_BATTERY; > > > > diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c > > index 1a65079..8627581 100644 > > --- a/drivers/hid/wacom_wac.c > > +++ b/drivers/hid/wacom_wac.c > > @@ -1826,6 +1826,49 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, > > size_t len) > > return 0; > > } > > > > +static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len) > > +{ > > + struct input_dev *input = wacom->input; > > + unsigned char *data = wacom->data; > > + unsigned char *finger_data, prefix; > > + unsigned id; > > + int x, y; > > + bool valid; > > + > > + /* bit 2 in data[1] is set when there is touch information > > available */ > > + if ((len != WACOM_PKGLEN_BP_TOUCH) || > > + (data[0] != WACOM_REPORT_BP_TOUCH) || > > + !(data[1] & 0x02)) > > + return 0; > > + > > + prefix = data[9]; > > + > > + for (id = 0; id < wacom->features.touch_max; id++) { > > + valid = !!(prefix & BIT(id)) && > > + !wacom->shared->stylus_in_proximity; > > + > > + input_mt_slot(input, id); > > + input_mt_report_slot_state(input, MT_TOOL_FINGER, valid); > > + > > + if (!valid) > > + continue; > > + > > + finger_data = data + 10 + id * 3; > > + x = finger_data[0] | ((finger_data[1] & 0x0f) << 8); > > + y = (finger_data[2] << 4) | (finger_data[1] >> 4); > > + > > + input_report_abs(input, ABS_MT_POSITION_X, x); > > + input_report_abs(input, ABS_MT_POSITION_Y, y); > > + } > > + > > + input_mt_sync_frame(input); > > + > > + input_report_key(input, BTN_LEFT, prefix & 0x40); > > + input_report_key(input, BTN_RIGHT, prefix & 0x80); > > + > > + return 1; > > +} > > + > > static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) > > { > > unsigned char *data = wacom->data; > > @@ -1962,6 +2005,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, > > size_t len) > > sync = wacom_bpt_irq(wacom_wac, len); > > break; > > > > + case BAMBOO_PAD: > > + sync = wacom_bamboo_pad_irq(wacom_wac, len); > > + break; > > + > > case WIRELESS: > > sync = wacom_wireless_irq(wacom_wac, len); > > break; > > @@ -2300,6 +2347,13 @@ int wacom_setup_pentouch_input_capabilities(struct > > input_dev *input_dev, > > 0, 0); > > } > > break; > > + case BAMBOO_PAD: > > + __clear_bit(ABS_MISC, input_dev->absbit); > > + input_mt_init_slots(input_dev, features->touch_max, > > + INPUT_MT_POINTER); > > + __set_bit(BTN_LEFT, input_dev->keybit); > > + __set_bit(BTN_RIGHT, input_dev->keybit); > > + break; > > } > > return 0; > > } > > @@ -2953,6 +3007,12 @@ static const struct wacom_features > > wacom_features_0x30C = > > { "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */ > > .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10, > > .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; > > +static const struct wacom_features wacom_features_0x318 = > > + { "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */ > > + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 }; > > +static const struct wacom_features wacom_features_0x319 = > > + { "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */ > > + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 }; > > static const struct wacom_features wacom_features_0x323 = > > { "Wacom Intuos P M", 21600, 13500, 1023, 31, > > INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, > > @@ -3101,6 +3161,8 @@ const struct hid_device_id wacom_ids[] = { > > { USB_DEVICE_WACOM(0x314) }, > > { USB_DEVICE_WACOM(0x315) }, > > { USB_DEVICE_WACOM(0x317) }, > > + { USB_DEVICE_WACOM(0x318) }, > > + { USB_DEVICE_WACOM(0x319) }, > > { USB_DEVICE_WACOM(0x323) }, > > { USB_DEVICE_WACOM(0x32A) }, > > { USB_DEVICE_WACOM(0x32B) }, > > diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h > > index 021ee1c..bf43e0f 100644 > > --- a/drivers/hid/wacom_wac.h > > +++ b/drivers/hid/wacom_wac.h > > @@ -33,6 +33,7 @@ > > #define WACOM_PKGLEN_MTTPC 40 > > #define WACOM_PKGLEN_DTUS 68 > > #define WACOM_PKGLEN_PENABLED 8 > > +#define WACOM_PKGLEN_BP_TOUCH 32 > > > > /* wacom data size per MT contact */ > > #define WACOM_BYTES_PER_MT_PACKET 11 > > @@ -67,6 +68,7 @@ > > #define WACOM_REPORT_24HDT 1 > > #define WACOM_REPORT_WL 128 > > #define WACOM_REPORT_USB 192 > > +#define WACOM_REPORT_BP_TOUCH 16 > > > > /* device quirks */ > > #define WACOM_QUIRK_MULTI_INPUT 0x0001 > > @@ -122,6 +124,7 @@ enum { > > BAMBOO_PT, > > WACOM_24HDT, > > WACOM_27QHDT, > > + BAMBOO_PAD, > > TABLETPC, /* add new TPC below */ > > TABLETPCE, > > TABLETPC2FG, > > -- > > 2.1.0 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/