Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752856AbbBWQdk (ORCPT ); Mon, 23 Feb 2015 11:33:40 -0500 Received: from bhuna.collabora.co.uk ([93.93.135.160]:46924 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752495AbbBWQdi (ORCPT ); Mon, 23 Feb 2015 11:33:38 -0500 Message-ID: <54EB5658.6080004@collabora.co.uk> Date: Mon, 23 Feb 2015 17:33:28 +0100 From: Javier Martinez Canillas User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Icedove/31.2.0 MIME-Version: 1.0 To: Doug Anderson , Jaehoon Chung , Seungwon Jeon , Ulf Hansson CC: Alim Akhtar , Sonny Rao , Andrew Bresticker , Heiko Stuebner , Addy Ke , Alexandru Stan , chris@printf.net, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy References: <1424464316-4397-1-git-send-email-dianders@chromium.org> In-Reply-To: <1424464316-4397-1-git-send-email-dianders@chromium.org> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8377 Lines: 230 Hello Doug, On 02/20/2015 09:31 PM, Doug Anderson wrote: > We've seen problems on some WiFi modules where we seem to send a CMD53 > (which requires the data lines) while the module is asserting busy. > We shouldn't do that. > > The Designware Databook says that before issuing a new data transfer > command we should check for busy, so that's what we'll do. > I tried $subject along with patches: * mmc: dw_mmc: Make sure we only adjust the clock when power is on https://patchwork.kernel.org/patch/5858261/ * mmc: dw_mmc: Give a good reset after we give power https://patchwork.kernel.org/patch/5858281/ but unfortunately these don't solve the "Timeout sending command" error that I got when trying to enable the WiFi module on the Peach Pit and Pi: [ 5.332103] dwmmc_exynos 12210000.mmc: Busy; trying anyway [ 5.336110] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x0) > We'll leverage the existing dw_mmc knowledge about whether it should > wait for the previous command to finish to know whether we should > check for busy before sending the command. This means we won't end up > incorrectly waiting for things like CMD52 (SDIO) or CMD13 (SD) which > don't use the data line. > > Note that this also has the advantage of making sure that we don't > change the clock while the card is busy, too. > The timeout happens in this case: mmc_rescan() mmc_attach_sdio() mmc_sdio_init_card() dw_mci_init_card() mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); which should be covered by your patch since the SDMMC_CMD_PRV_DAT_WAIT flag is set but SDMMC_STATUS_BUSY bit is not cleared and mci_send_cmd() timeouts when sending the command to the controller. > > +static void dw_mci_wait_while_busy(struct dw_mci *host, u32 cmd_flags) > +{ > + unsigned long timeout = jiffies + msecs_to_jiffies(500); > + > + /* > + * Databook says that before issuing a new data transfer command > + * we need to check to see if the card is busy. Data transfer commands > + * all have SDMMC_CMD_PRV_DAT_WAIT set, so we'll key off that. > + * > + * ...also allow sending for SDMMC_CMD_VOLT_SWITCH where busy is > + * expected. > + */ > + if ((cmd_flags & SDMMC_CMD_PRV_DAT_WAIT) && > + !(cmd_flags & SDMMC_CMD_VOLT_SWITCH)) { > + while (mci_readl(host, STATUS) & SDMMC_STATUS_BUSY) { > + if (time_after(jiffies, timeout)) { > + /* Command will fail; we'll pass error then */ > + dev_err(host->dev, "Busy; trying anyway\n"); Addy's "mmc: dw_mmc: fix bug that cause 'Timeout sending command" [0] patch reset the controller if it was busy for more than 500ms while your patch doesn't. I don't mean that your patch is not correct, I'm just mentioning because calling dw_mci_ctrl_reset() does makes the command to succeed the next time and I can see the SDIO devices enumerated in /sys/bus/sdio/devices: [ 5.892124] dwmmc_exynos 12210000.mmc: Busy; trying anyway [ 5.892135] mmc_host mmc2: Timeout sending command (cmd 0x202000 arg 0x0 status 0x0) [ 5.913885] mmc2: new high speed SDIO card at address 0001 [ 6.582133] dwmmc_exynos 12210000.mmc: Busy; trying anyway but that reset may not be right since the WiFi chip does not work because the firmware later fails to load: [ 240.273352] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.281159] kworker/2:1 D c04b3340 0 1260 2 0x00000000 [ 240.287487] Workqueue: events request_firmware_work_func [ 240.292763] [] (__schedule) from [] (schedule+0x34/0x98) [ 240.299815] [] (schedule) from [] (schedule_timeout+0x120/0x16c) [ 240.307537] [] (schedule_timeout) from [] (wait_for_common+0xb0/0x154) [ 240.315783] [] (wait_for_common) from [] (mmc_wait_for_req+0xa0/0x140) [ 240.324020] [] (mmc_wait_for_req) from [] (mmc_io_rw_extended+0x304/0x34c) [ 240.332607] [] (mmc_io_rw_extended) from [] (sdio_io_rw_ext_helper+0x138/0x1a4) [ 240.341630] [] (sdio_io_rw_ext_helper) from [] (sdio_writesb+0x20/0x28) [ 240.349962] [] (sdio_writesb) from [] (mwifiex_write_data_sync+0x4c/0x80) [ 240.358460] [] (mwifiex_write_data_sync) from [] (mwifiex_prog_fw_w_helper+0x1b0/0x2c4) [ 240.368176] [] (mwifiex_prog_fw_w_helper) from [] (mwifiex_dnld_fw+0x58/0x10c) [ 240.377127] [] (mwifiex_dnld_fw) from [] (mwifiex_fw_dpc+0x264/0x408) [ 240.385263] [] (mwifiex_fw_dpc) from [] (request_firmware_work_func+0x30/0x50) [ 240.394200] [] (request_firmware_work_func) from [] (process_one_work+0x120/0x324) [ 240.403482] [] (process_one_work) from [] (worker_thread+0x138/0x464) [ 240.411635] [] (worker_thread) from [] (kthread+0xd8/0xf4) [ 240.418837] [] (kthread) from [] (ret_from_fork+0x14/0x34) The DTS changes on top of linux-next to add WiFi support is [1] in case you can find something that is wrong with my patch. I also checked that the external reference clock for the WiFi module is enabled correctly according to /sys/kernel/debug/clk/clk_summary and also by looking at the value in the max77802 i2c register address that enables that clock. Any hints will be highly appreciated. Thanks a lot and best regards, Javier [0]: https://lkml.org/lkml/2015/2/5/222 [1]: >From ced0974472d109019e1ee551a6dd08f16ae5cfc2 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 23 Feb 2014 15:42:15 +0100 Subject: [PATCH] ARM: dts: Add Peach Pit board WiFi support Peach boards have an SDIO WiFi module that is always powered but it needs a power sequence involving the reset and enable pins and also a 32kHz reference clock. Add a dev node for the SDIO slot and the MMC power sequence provider. Signed-off-by: Javier Martinez Canillas --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 59 ++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index ec86d9523935..26df041e46e7 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -125,6 +125,14 @@ }; }; }; + + mmc1_pwrseq: mmc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 1 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ + <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77802 MAX77802_CLK_32K_CP>; + clock-names = "ext_clock"; + }; }; &adc { @@ -691,6 +699,24 @@ bus-width = <8>; }; +&mmc_1 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus4>, + <&sd1_bus8>, <&wifi_en>, <&wifi_rst>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc1_pwrseq>; +}; + &mmc_2 { status = "okay"; num-slots = <1>; @@ -710,6 +736,20 @@ pinctrl-names = "default"; pinctrl-0 = <&mask_tpm_reset>; + wifi_en: wifi-en { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + wifi_rst: wifi-rst { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max98090_irq: max98090-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -797,6 +837,25 @@ }; }; +&pinctrl_1 { + /* Adjust WiFi drive strengths lower for EMI */ + sd1_clk: sd1-clk { + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pin-drv = <2>; + }; +}; + &pinctrl_2 { pmic_dvs_2: pmic-dvs-2 { samsung,pins = "gpj4-2"; -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/