Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753751AbbBZKCk (ORCPT ); Thu, 26 Feb 2015 05:02:40 -0500 Received: from mail-pa0-f50.google.com ([209.85.220.50]:46664 "EHLO mail-pa0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753695AbbBZKCg (ORCPT ); Thu, 26 Feb 2015 05:02:36 -0500 From: Peter Hung X-Google-Original-From: Peter Hung To: johan@kernel.org Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw, peter_hong@fintek.com.tw, hpeter@gmail.com, Peter Hung Subject: [PATCH V8 06/10] USB: f81232: implement port enable/disable method Date: Thu, 26 Feb 2015 18:02:12 +0800 Message-Id: <1424944936-7117-7-git-send-email-hpeter+linux_kernel@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1424944936-7117-1-git-send-email-hpeter+linux_kernel@gmail.com> References: <1424944936-7117-1-git-send-email-hpeter+linux_kernel@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2839 Lines: 97 We put FCR/IER initial step to f81232_port_enable()/f81232_port_disable(). When port is open, it set MSR interrupt on. Otherwise set it off. Signed-off-by: Peter Hung --- drivers/usb/serial/f81232.c | 49 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index b70f9b9..a3f9530 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -37,6 +37,8 @@ MODULE_DEVICE_TABLE(usb, id_table); #define F81232_SET_REGISTER 0x40 #define SERIAL_BASE_ADDRESS 0x0120 +#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) +#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) #define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) #define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) @@ -344,6 +346,48 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state) */ } +static int f81232_port_enable(struct usb_serial_port *port) +{ + u8 val; + int status; + + /* fifo on, trigger8, clear TX/RX*/ + val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT; + + status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s failed to set FCR: %d\n", + __func__, status); + return status; + } + + /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + UART_IER_MSI); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static int f81232_port_disable(struct usb_serial_port *port) +{ + int status; + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -395,6 +439,10 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; + result = f81232_port_enable(port); + if (result) + return result; + /* Setup termios */ if (tty) f81232_set_termios(tty, port, NULL); @@ -417,6 +465,7 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) static void f81232_close(struct usb_serial_port *port) { + f81232_port_disable(port); usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/