Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754161AbbBZPuK (ORCPT ); Thu, 26 Feb 2015 10:50:10 -0500 Received: from bhuna.collabora.co.uk ([93.93.135.160]:54781 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753404AbbBZPuH (ORCPT ); Thu, 26 Feb 2015 10:50:07 -0500 From: Javier Martinez Canillas To: Kukjin Kim Cc: Doug Anderson , Olof Johansson , Tushar Behera , Kevin Hilman , Andreas Faerber , Tyler Baker , Steve Capper , Amit Kucheria , linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH 0/3] ARM: dts: Peach boards WiFi and audio support Date: Thu, 26 Feb 2015 16:49:33 +0100 Message-Id: <1424965776-4381-1-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.1.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1685 Lines: 40 Hello Kukjin, This series adds support for the remaining peripherals that were not supported in the Exynos5420 Peach Pit and Exynos5800 Peach Pi boards. Javier Martinez Canillas (2): ARM: dts: Mux XMMCnDATA[0] pad correctly for Exynos5420 boards. ARM: dts: Add WiFi module support for Peach boards Tushar Behera (1): ARM: dts: Add mclk entry for Peach Pit/Pi boards arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 +- arch/arm/boot/dts/exynos5420-peach-pit.dts | 62 ++++++++++++++++++++++++++- arch/arm/boot/dts/exynos5420-smdk5420.dts | 4 +- arch/arm/boot/dts/exynos5422-odroidxu3.dts | 4 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 62 ++++++++++++++++++++++++++- 5 files changed, 126 insertions(+), 10 deletions(-) Patch #1 is just a bugfix since the DTS was relying in the bootloader to mux the XMMCnDATA[0] pad in function mode SD_n_DATA[0] for the uSD and eMMC. The same bug was present in all Exynos5420/5422/5800 boards probably due a difference in how the 5250 and 5420 pinctrl is defined. Patch #2 adds support for the SDIO WiFi module present in Peach boards and patch #3 adds a phandle for the audio codec master clock source. After this series all the peripherals in the Peach boards are working at least at a basic level, more work is needed to make the ASoC audio driver more robust or the WiFi chip to support highspeed mode but that can be made as a follow-up. Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/