Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753343AbbCAEdQ (ORCPT ); Sat, 28 Feb 2015 23:33:16 -0500 Received: from smtp-outbound-1.vmware.com ([208.91.2.12]:54182 "EHLO smtp-outbound-1.vmware.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752989AbbCAEdO (ORCPT ); Sat, 28 Feb 2015 23:33:14 -0500 From: Shrikrishna Khare To: sbhatewara@vmware.com, pv-drivers@vmware.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Shrikrishna Khare , Amitabha Banerjee Subject: [PATCH net-next] Driver: Vmxnet3: Copy TCP header to mapped frame for IPv6 packets Date: Sat, 28 Feb 2015 20:33:09 -0800 Message-Id: <1425184389-29481-1-git-send-email-skhare@vmware.com> X-Mailer: git-send-email 1.8.5.6 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3515 Lines: 106 Allows for packet parsing to be done by the fast path. This performance optimization already exists for IPv4. Add similar logic for IPv6. Signed-off-by: Amitabha Banerjee Signed-off-by: Shrikrishna Khare --- drivers/net/vmxnet3/vmxnet3_drv.c | 29 ++++++++++++++++++++--------- drivers/net/vmxnet3/vmxnet3_int.h | 5 +++-- 2 files changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 294214c..61c0840 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -819,6 +819,7 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) { struct Vmxnet3_TxDataDesc *tdd; + u8 protocol = 0; if (ctx->mss) { /* TSO */ ctx->eth_ip_hdr_size = skb_transport_offset(skb); @@ -831,16 +832,25 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, if (ctx->ipv4) { const struct iphdr *iph = ip_hdr(skb); - if (iph->protocol == IPPROTO_TCP) - ctx->l4_hdr_size = tcp_hdrlen(skb); - else if (iph->protocol == IPPROTO_UDP) - ctx->l4_hdr_size = sizeof(struct udphdr); - else - ctx->l4_hdr_size = 0; - } else { - /* for simplicity, don't copy L4 headers */ + protocol = iph->protocol; + } else if (ctx->ipv6) { + const struct ipv6hdr *ipv6h = ipv6_hdr(skb); + + protocol = ipv6h->nexthdr; + } + + switch (protocol) { + case IPPROTO_TCP: + ctx->l4_hdr_size = tcp_hdrlen(skb); + break; + case IPPROTO_UDP: + ctx->l4_hdr_size = sizeof(struct udphdr); + break; + default: ctx->l4_hdr_size = 0; + break; } + ctx->copy_size = min(ctx->eth_ip_hdr_size + ctx->l4_hdr_size, skb->len); } else { @@ -887,7 +897,7 @@ vmxnet3_prepare_tso(struct sk_buff *skb, iph->check = 0; tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, 0, IPPROTO_TCP, 0); - } else { + } else if (ctx->ipv6) { struct ipv6hdr *iph = ipv6_hdr(skb); tcph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, 0, @@ -938,6 +948,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, count = txd_estimate(skb); ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP)); + ctx.ipv6 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IPV6)); ctx.mss = skb_shinfo(skb)->gso_size; if (ctx.mss) { diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index cd71c77..6bb769a 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -69,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.3.4.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.3.5.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01030400 +#define VMXNET3_DRIVER_VERSION_NUM 0x01030500 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ @@ -211,6 +211,7 @@ struct vmxnet3_tq_driver_stats { struct vmxnet3_tx_ctx { bool ipv4; + bool ipv6; u16 mss; u32 eth_ip_hdr_size; /* only valid for pkts requesting tso or csum * offloading -- 1.8.5.6 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/