Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752660AbbDCLcX (ORCPT ); Fri, 3 Apr 2015 07:32:23 -0400 Received: from nblzone-211-213.nblnetworks.fi ([83.145.211.213]:46358 "EHLO hillosipuli.retiisi.org.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752384AbbDCLcV (ORCPT ); Fri, 3 Apr 2015 07:32:21 -0400 Date: Fri, 3 Apr 2015 14:32:16 +0300 From: Sakari Ailus To: Pavel Machek Cc: Andrew Morton , pali.rohar@gmail.com, sre@debian.org, sre@ring0.de, kernel list , linux-arm-kernel , linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com, galak@codeaurora.org, bcousson@baylibre.com, m.chehab@samsung.com, devicetree@vger.kernel.org Subject: Re: [PATCHv5] media: i2c/adp1653: devicetree support for adp1653 Message-ID: <20150403113216.GK20756@valkosipuli.retiisi.org.uk> References: <20150402143846.GA11687@amd> <20150402203417.GA6336@amd> <20150403083353.GA21070@amd> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20150403083353.GA21070@amd> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7722 Lines: 264 Hi Pavel, Thanks for the update. On Fri, Apr 03, 2015 at 10:33:53AM +0200, Pavel Machek wrote: > > We are moving to device tree support on OMAP3, but that currently > breaks ADP1653 driver. This adds device tree support, plus required > documentation. > > Signed-off-by: Pavel Machek > > --- > > Switched to gpiod_, as requested by Javier. > > Please apply, Let's properly review this first. > Pavel > > diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt > new file mode 100644 > index 0000000..da9934a > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt Please split this as Javier suggested. I'd think both could go through the media-tree unless someone objects. > @@ -0,0 +1,37 @@ > +* Analog Devices ADP1653 flash LED driver > + > +Required Properties: > + > + - compatible: Must contain be "adi,adp1653" > + > + - reg: I2C slave address > + > + - power-gpios: Reference to the GPIO that controls the power for the chip. You're using power-gpios in documentation only. The spec refers to this by "EN". How about "en-gpios" instead? This definitely isn't about power, but about resetting the chip. It gets the power through another pin. > + > +There are two LED outputs available - flash and indicator. One LED is > +represented by one child node, nodes need to be named "flash" and "indicator". > + > +Required properties of the LED child node: > +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt > + > +Required properties of the flash LED child node: > + > +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt > +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt > + > +Example: > + > + adp1653: led-controller@30 { > + compatible = "adi,adp1653"; > + reg = <0x30>; > + power-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ > + > + flash { > + flash-timeout-us = <500000>; > + flash-max-microamp = <320000>; > + max-microamp = <50000>; > + }; > + indicator { > + max-microamp = <17500>; > + }; > + }; > diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c > index 873fe19..ba7f43d 100644 > --- a/drivers/media/i2c/adp1653.c > +++ b/drivers/media/i2c/adp1653.c > @@ -8,6 +8,7 @@ > * Contributors: > * Sakari Ailus > * Tuukka Toivonen > + * Pavel Machek > * > * This program is free software; you can redistribute it and/or > * modify it under the terms of the GNU General Public License > @@ -34,6 +35,8 @@ > #include > #include > #include > +#include > +#include > #include > #include > > @@ -306,9 +309,17 @@ adp1653_init_device(struct adp1653_flash *flash) > static int > __adp1653_set_power(struct adp1653_flash *flash, int on) > { > - int ret; > + int ret = 0; > + > + if (flash->platform_data->power) { > + ret = flash->platform_data->power(&flash->subdev, on); > + } else { > + gpiod_set_value(flash->platform_data->power_gpio, on); > + if (on) > + /* Some delay is apparently required. */ > + udelay(20); > + } > > - ret = flash->platform_data->power(&flash->subdev, on); > if (ret < 0) > return ret; > > @@ -316,8 +327,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) > return 0; > > ret = adp1653_init_device(flash); > - if (ret < 0) > + if (ret >= 0) > + return ret; > + > + if (flash->platform_data->power) > flash->platform_data->power(&flash->subdev, 0); > + else > + gpiod_set_value(flash->platform_data->power_gpio, 0); > > return ret; > } > @@ -407,21 +423,75 @@ static int adp1653_resume(struct device *dev) > > #endif /* CONFIG_PM */ > > +static int adp1653_of_init(struct i2c_client *client, > + struct adp1653_flash *flash, > + struct device_node *node) > +{ > + u32 val; > + struct adp1653_platform_data *pd; > + struct device_node *child; > + > + if (!node) > + return -EINVAL; > + > + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); > + if (!pd) > + return -ENOMEM; > + flash->platform_data = pd; > + > + child = of_get_child_by_name(node, "flash"); > + if (!child) > + return -EINVAL; > + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) > + return -EINVAL; > + > + pd->max_flash_timeout = val; > + if (of_property_read_u32(child, "flash-max-microamp", &val)) > + return -EINVAL; > + pd->max_flash_intensity = val/1000; > + > + if (of_property_read_u32(child, "max-microamp", &val)) > + return -EINVAL; > + pd->max_torch_intensity = val/1000; I think you need to do of_node_put(child) here and after you're done with indicator below. > + > + child = of_get_child_by_name(node, "indicator"); > + if (!child) > + return -EINVAL; > + if (of_property_read_u32(child, "max-microamp", &val)) > + return -EINVAL; > + pd->max_indicator_intensity = val; > + > + if (!of_find_property(node, "gpios", NULL)) { > + dev_err(&client->dev, "No gpio node\n"); > + return -EINVAL; > + } > + > + pd->power_gpio = devm_gpiod_get(&client->dev, "power"); > + if (!pd->power_gpio) { > + dev_err(&client->dev, "Error getting GPIO\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > + > static int adp1653_probe(struct i2c_client *client, > const struct i2c_device_id *devid) > { > struct adp1653_flash *flash; > int ret; > > - /* we couldn't work without platform data */ > - if (client->dev.platform_data == NULL) > - return -ENODEV; > - > flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); > if (flash == NULL) > return -ENOMEM; > > flash->platform_data = client->dev.platform_data; > + if (client->dev.of_node) { > + ret = adp1653_of_init(client, flash, client->dev.of_node); > + if (ret) > + return ret; > + } > > mutex_init(&flash->power_lock); > > @@ -442,6 +512,7 @@ static int adp1653_probe(struct i2c_client *client, > return 0; > > free_and_quit: > + dev_err(&client->dev, "adp1653: failed to register device\n"); > v4l2_ctrl_handler_free(&flash->ctrls); > return ret; > } > @@ -464,7 +535,7 @@ static const struct i2c_device_id adp1653_id_table[] = { > }; > MODULE_DEVICE_TABLE(i2c, adp1653_id_table); > > -static struct dev_pm_ops adp1653_pm_ops = { > +static const struct dev_pm_ops adp1653_pm_ops = { > .suspend = adp1653_suspend, > .resume = adp1653_resume, > }; > diff --git a/include/media/adp1653.h b/include/media/adp1653.h > index 1d9b48a..34b505e 100644 > --- a/include/media/adp1653.h > +++ b/include/media/adp1653.h > @@ -100,9 +100,11 @@ struct adp1653_platform_data { > int (*power)(struct v4l2_subdev *sd, int on); > > u32 max_flash_timeout; /* flash light timeout in us */ > - u32 max_flash_intensity; /* led intensity, flash mode */ > - u32 max_torch_intensity; /* led intensity, torch mode */ > - u32 max_indicator_intensity; /* indicator led intensity */ > + u32 max_flash_intensity; /* led intensity, flash mode, mA */ > + u32 max_torch_intensity; /* led intensity, torch mode, mA */ > + u32 max_indicator_intensity; /* indicator led intensity, uA */ > + > + struct gpio_desc *power_gpio; /* for device-tree based boot */ > }; > > #define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev) > -- Kind regards, Sakari Ailus e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/