Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755155AbbDIItu (ORCPT ); Thu, 9 Apr 2015 04:49:50 -0400 Received: from mail.kernel.org ([198.145.29.136]:40458 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751783AbbDIItr (ORCPT ); Thu, 9 Apr 2015 04:49:47 -0400 From: lizf@kernel.org To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Thor Thayer , Vlastimil Setka , Mark Brown , Zefan Li Subject: [PATCH 3.4 001/176] spi: dw: Fix dynamic speed change. Date: Thu, 9 Apr 2015 16:44:09 +0800 Message-Id: <1428569224-23820-1-git-send-email-lizf@kernel.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1428569028-23762-1-git-send-email-lizf@kernel.org> References: <1428569028-23762-1-git-send-email-lizf@kernel.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2748 Lines: 76 From: Thor Thayer 3.4.107-rc1 review patch. If anyone has any objections, please let me know. ------------------ commit 0a8727e69778683495058852f783eeda141a754e upstream. An IOCTL call that calls spi_setup() and then dw_spi_setup() will overwrite the persisted last transfer speed. On each transfer, the SPI speed is compared to the last transfer speed to determine if the clock divider registers need to be updated (did the speed change?). This bug was observed with the spidev driver using spi-config to update the max transfer speed. This fix: Don't overwrite the persisted last transaction clock speed when updating the SPI parameters in dw_spi_setup(). On the next transaction, the new speed won't match the persisted last speed and the hardware registers will be updated. On initialization, the persisted last transaction clock speed will be 0 but will be updated after the first SPI transaction. Move zeroed clock divider check into clock change test because chip->clk_div is zero on startup and would cause a divide-by-zero error. The calculation was wrong as well (can't support odd #). Reported-by: Vlastimil Setka Signed-off-by: Vlastimil Setka Signed-off-by: Thor Thayer Signed-off-by: Mark Brown Signed-off-by: Zefan Li --- drivers/spi/spi-dw.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index d1a495f..ff06b42 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -394,9 +394,6 @@ static void pump_transfers(unsigned long data) chip = dws->cur_chip; spi = message->spi; - if (unlikely(!chip->clk_div)) - chip->clk_div = dws->max_freq / chip->speed_hz; - if (message->state == ERROR_STATE) { message->status = -EIO; goto early_exit; @@ -438,7 +435,7 @@ static void pump_transfers(unsigned long data) if (transfer->speed_hz) { speed = chip->speed_hz; - if (transfer->speed_hz != speed) { + if ((transfer->speed_hz != speed) || (!chip->clk_div)) { speed = transfer->speed_hz; if (speed > dws->max_freq) { printk(KERN_ERR "MRST SPI0: unsupported" @@ -677,7 +674,6 @@ static int dw_spi_setup(struct spi_device *spi) dev_err(&spi->dev, "No max speed HZ parameter\n"); return -EINVAL; } - chip->speed_hz = spi->max_speed_hz; chip->tmode = 0; /* Tx & Rx */ /* Default SPI mode is SCPOL = 0, SCPH = 0 */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/