Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 10 Jan 2003 18:44:37 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 10 Jan 2003 18:44:37 -0500 Received: from falcon.vispa.uk.net ([62.24.228.11]:19475 "EHLO falcon.vispa.com") by vger.kernel.org with ESMTP id ; Fri, 10 Jan 2003 18:44:27 -0500 Message-ID: <3E1F5C96.5030901@walrond.org> Date: Fri, 10 Jan 2003 23:51:50 +0000 From: Andrew Walrond User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.1) Gecko/20021020 X-Accept-Language: en-us, en MIME-Version: 1.0 To: "Grover, Andrew" CC: acpi-devel@sourceforge.net, kernel list Subject: Re: ACPI patches updated (20030109) References: Content-Type: multipart/mixed; boundary="------------060604030803020205010200" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32138 Lines: 750 This is a multi-part message in MIME format. --------------060604030803020205010200 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, Linux 2.5 bk which includes these patches still does not discover two pci buses on an asus pr-dls dual P4 Xeon machine; scsi and e1000 missing. Linux 2.4 bk works fine I attach dmesg output from both 2.4-bk and 2.5-bk with Acpi debug messages enabled incase it helps. I have tried to fathom this myself, but no luck so far. PCI and ACPI is a lot to take in.... Any help apprieciated Grover, Andrew wrote: > Hi all, > > ACPI patches based upon the 20030109 label have been released. > http://sourceforge.net/projects/acpi . The non-Linux releases will be > available at > http://developer.intel.com/technology/iapc/acpi/downloads.htm , by > tomorrow. > > Regards -- Andy > --------------060604030803020205010200 Content-Type: text/plain; name="dmesg-2.4" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.4" Linux version 2.4.21-pre3 (root@r2d2.office) (gcc version 3.2) #6 SMP Fri Jan 10 23:42:43 GMT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fffa000 (usable) BIOS-e820: 000000007fffa000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f0490 hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 524282 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294906 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f4ff0 RSD PTR v0 [ASUS ] __va_range(0x7fffa000, 0x68): idx=8 mapped at ffff6000 ACPI table found: RSDT v1 [ASUS PR-DLS 16944.11825] __va_range(0x7fffa145, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fffa145, 0x74): idx=8 mapped at ffff6000 ACPI table found: FACP v1 [ASUS PR-DLS 16944.11825] __va_range(0x7fffa034, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fffa034, 0x28): idx=8 mapped at ffff6000 ACPI table found: BOOT v1 [ASUS PR-DLS 16944.11825] __va_range(0x7fffa05c, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fffa05c, 0x4d): idx=8 mapped at ffff6000 ACPI table found: SPCR v1 [ASUS PR-DLS 16944.11825] __va_range(0x7fffa0a9, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fffa0a9, 0x9c): idx=8 mapped at ffff6000 ACPI table found: APIC v1 [ASUS PR-DLS 16944.11825] __va_range(0x7fffa0a9, 0x9c): idx=8 mapped at ffff6000 IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) IOAPIC (id[0x3] address[0xfec01000] global_irq_base[0x10]) IOAPIC (id[0x4] address[0xfec02000] global_irq_base[0x20]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1]) INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3]) LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC (acpi_id[0x0001] id[0x1] enabled[1]) CPU 1 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC (acpi_id[0x0002] id[0x6] enabled[1]) CPU 2 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC (acpi_id[0x0003] id[0x7] enabled[1]) CPU 3 (0x0700) enabledProcessor #7 Pentium 4(tm) XEON(tm) APIC version 16 4 CPUs total Local APIC address fee00000 Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 4 Kernel command line: ro root=/dev/nfs ip=dhcp console=tty0 console=ttyS0,115200n8 init=/boot.sh Initializing CPU#0 Detected 2591.727 MHz processor. Calibrating delay loop... 5164.23 BogoMIPS Memory: 2069488k/2097128k available (1447k kernel code, 27256k reserved, 367k data, 276k init, 1179624k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 per-CPU timeslice cutoff: 1462.69 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5177.34 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 Booting processor 2/6 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5177.34 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU2: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5177.34 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU3: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07 Total of 4 processors activated (20696.26 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. Setting 9 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 9 ... ok. Setting 10 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 10 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-3, 8-10, 8-12, 8-14, 8-15, 9-0, 9-1, 9-4, 9-5, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-15 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 16. number of IO-APIC #8 registers: 16. number of IO-APIC #9 registers: 16. number of IO-APIC #10 registers: 16. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 001 01 0 0 0 0 0 1 1 41 05 001 01 0 0 0 0 0 1 1 49 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 001 01 1 1 0 1 0 1 1 71 0c 000 00 1 0 0 0 0 0 0 00 0d 001 01 0 0 0 0 0 1 1 79 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 09000000 ....... : arbitration: 09 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 001 01 1 1 0 1 0 1 1 81 03 001 01 1 1 0 1 0 1 1 89 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 001 01 1 1 0 1 0 1 1 91 07 001 01 1 1 0 1 0 1 1 99 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0A000000 ....... : arbitration: 0A .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 001 01 1 1 0 1 0 1 1 A1 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ11 -> 0:11 IRQ13 -> 0:13 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ46 -> 2:14 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2591.6430 MHz. ..... host bus clock speed is 99.6785 MHz. cpu: 0, clocks: 996785, slice: 199357 CPU0 cpu: 1, clocks: 996785, slice: 199357 cpu: 2, clocks: 996785, slice: 199357 cpu: 3, clocks: 996785, slice: 199357 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0xe) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xf1510, last bus=22 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Discovered primary peer bus 04 [IRQ] PCI: Discovered primary peer bus 0e [IRQ] PCI: Discovered primary peer bus 12 [IRQ] PCI: Discovered primary peer bus 13 [IRQ] PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 18 PCI->APIC IRQ transform: (B0,I3,P0) -> 46 PCI->APIC IRQ transform: (B14,I4,P0) -> 22 PCI->APIC IRQ transform: (B14,I4,P1) -> 23 PCI->APIC IRQ transform: (B18,I2,P0) -> 19 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:.......................................................................................................................................................................................................... 202 Control Methods found and parsed (643 nodes total) ACPI Namespace successfully loaded at root c034d2a0 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [-11] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:.............................................................. 62 Devices found: 62 _STA, 4 _INI Completing Region and Field initialization:........ 8/12 Regions, 0/0 Fields initialized (643 nodes total) ACPI: Subsystem enabled ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 Processor[1]: C0 C1 Processor[2]: C0 C1 Processor[3]: C0 C1 ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 4.4.19-k1 Copyright (c) 1999-2002 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection Intel(R) PRO/100 Network Driver - version 2.1.29-k1 Copyright (c) 2002 Intel Corporation e100: selftest OK. e100: eth1: Intel(R) PRO/100 S Server Adapter Hardware receive checksums enabled NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Sending DHCP requests ., OK IP-Config: Got DHCP answer from 10.0.0.1, my address is 10.0.0.101 IP-Config: Complete: device=eth1, addr=10.0.0.101, mask=255.255.0.0, gw=10.0.0.1, host=hal1.office, domain=office, nis-domain=(none), bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath=/eboot/slash/hal.office NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 10.0.0.1 Looking up port of RPC 100005/1 on 10.0.0.1 VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 276k freed Warning: unable to open an initial console. e100: eth1 NIC Link is Up 100 Mbps Full duplex svc: unknown version (3) --------------060604030803020205010200 Content-Type: text/plain; name="dmesg-2.5.56" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.5.56" the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2591.0353 MHz. ..... host bus clock speed is 99.0667 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 4 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) device class 'cpu': registering device class cpu: adding driver system:cpu PCI: PCI BIOS revision 2.10 entry at 0xf1510, last bus=22 PCI: Using configuration type 1 device class cpu: adding device CPU 0 interfaces: adding device CPU 0 device class cpu: adding device CPU 1 interfaces: adding device CPU 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030109 tbxface-0098 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.......................................................................................................................................................................................................... Table [DSDT] - 643 Objects with 62 Devices 202 Methods 12 Regions ACPI Namespace successfully loaded at root c039c5fc evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode successful evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE31 evgpe-0262: *** Info: GPE Block1 defined as GPE32 to GPE63 Executing all Device _STA and_INI methods:.............................................................. 62 Devices found containing: 62 _STA, 4 _INI methods Completing Region/Field/Buffer/Package initialization:....................................................................... Initialized 8/12 Regions 0/0 Fields 49/49 Buffers 14/14 Packages (643 nodes) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKQ] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKR] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKS] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKT] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKV] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKW] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKX] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKY] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKZ] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0 ACPI: PCI Interrupt Link [LNK5] (IRQs 5 10 11 12 14 15, disabled) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] pci_bind-0191 [04] acpi_pci_bind : Device 00:00:0f.02 not present in PCI namespace ACPI: PCI Root Bridge [PCI1] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Root Bridge [PCI2] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] ACPI: PCI Root Bridge [PCI3] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT] ACPI: PCI Root Bridge [PCI4] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT] block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 pci_link-0343 [03] acpi_pci_link_set : Attempt to enable at IRQ 11 resulted in IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 0 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 pci_link-0343 [03] acpi_pci_link_set : Attempt to enable at IRQ 11 resulted in IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 0 ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKJ] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKK] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKL] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKM] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKN] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKO] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKP] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKQ] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKR] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKT] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKV] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10 pci_link-0343 [03] acpi_pci_link_set : Attempt to enable at IRQ 5 resulted in IRQ 10 ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 0 IOAPIC[2]: Set PCI routing entry (4-14 -> 0xa9 -> IRQ 46) 00:00:03[A] -> 4-14 -> IRQ 46 IOAPIC[1]: Set PCI routing entry (3-2 -> 0xb1 -> IRQ 18) 00:00:02[A] -> 3-2 -> IRQ 18 IOAPIC[1]: Set PCI routing entry (3-10 -> 0xb9 -> IRQ 26) 00:00:04[A] -> 3-10 -> IRQ 26 IOAPIC[2]: Set PCI routing entry (4-11 -> 0xc1 -> IRQ 43) 00:00:04[B] -> 4-11 -> IRQ 43 IOAPIC[2]: Set PCI routing entry (4-12 -> 0xc9 -> IRQ 44) 00:00:04[C] -> 4-12 -> IRQ 44 IOAPIC[2]: Set PCI routing entry (4-13 -> 0xd1 -> IRQ 45) 00:00:04[D] -> 4-13 -> IRQ 45 IOAPIC[1]: Set PCI routing entry (3-8 -> 0xd9 -> IRQ 24) 00:00:04[A] -> 3-8 -> IRQ 24 IOAPIC[2]: Set PCI routing entry (4-5 -> 0xe1 -> IRQ 37) 00:00:04[B] -> 4-5 -> IRQ 37 IOAPIC[2]: Set PCI routing entry (4-6 -> 0xe9 -> IRQ 38) 00:00:04[C] -> 4-6 -> IRQ 38 IOAPIC[2]: Set PCI routing entry (4-7 -> 0x32 -> IRQ 39) 00:00:04[D] -> 4-7 -> IRQ 39 IOAPIC[1]: Set PCI routing entry (3-5 -> 0x3a -> IRQ 21) 00:00:03[A] -> 3-5 -> IRQ 21 IOAPIC[2]: Set PCI routing entry (4-2 -> 0x42 -> IRQ 34) 00:00:03[B] -> 4-2 -> IRQ 34 IOAPIC[2]: Set PCI routing entry (4-3 -> 0x4a -> IRQ 35) 00:00:03[C] -> 4-3 -> IRQ 35 IOAPIC[2]: Set PCI routing entry (4-4 -> 0x52 -> IRQ 36) 00:00:03[D] -> 4-4 -> IRQ 36 IOAPIC[1]: Set PCI routing entry (3-4 -> 0x5a -> IRQ 20) 00:00:02[A] -> 3-4 -> IRQ 20 IOAPIC[1]: Set PCI routing entry (3-15 -> 0x62 -> IRQ 31) 00:00:02[B] -> 3-15 -> IRQ 31 IOAPIC[2]: Set PCI routing entry (4-0 -> 0x6a -> IRQ 32) 00:00:02[C] -> 4-0 -> IRQ 32 IOAPIC[2]: Set PCI routing entry (4-1 -> 0x72 -> IRQ 33) 00:00:02[D] -> 4-1 -> IRQ 33 IOAPIC[1]: Set PCI routing entry (3-6 -> 0x7a -> IRQ 22) 00:00:04[A] -> 3-6 -> IRQ 22 IOAPIC[1]: Set PCI routing entry (3-7 -> 0x82 -> IRQ 23) 00:00:04[B] -> 3-7 -> IRQ 23 IOAPIC[1]: Set PCI routing entry (3-9 -> 0x8a -> IRQ 25) 00:00:02[A] -> 3-9 -> IRQ 25 IOAPIC[2]: Set PCI routing entry (4-8 -> 0x92 -> IRQ 40) 00:00:02[B] -> 4-8 -> IRQ 40 Pin 3-6 already programmed Pin 3-7 already programmed IOAPIC[1]: Set PCI routing entry (3-3 -> 0x9a -> IRQ 19) 00:00:02[A] -> 3-3 -> IRQ 19 IOAPIC[1]: Set PCI routing entry (3-1 -> 0xa2 -> IRQ 17) 00:00:02[A] -> 3-1 -> IRQ 17 IOAPIC[1]: Set PCI routing entry (3-12 -> 0xaa -> IRQ 28) 00:00:02[B] -> 3-12 -> IRQ 28 IOAPIC[1]: Set PCI routing entry (3-13 -> 0xb2 -> IRQ 29) 00:00:02[C] -> 3-13 -> IRQ 29 IOAPIC[1]: Set PCI routing entry (3-14 -> 0xba -> IRQ 30) 00:00:02[D] -> 3-14 -> IRQ 30 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Enabling SEP on CPU 0 Enabling SEP on CPU 1 highmem bounce pool size: 64 pages aio_setup: sizeof(struct page) = 40 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled tts/0 at I/O 0x3f8 (irq = 4) is a 16550A device class 'tty': registering pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Intel(R) PRO/100 Network Driver - version 2.1.29-k1 Copyright (c) 2002 Intel Corporation e100: selftest OK. Freeing alive device c27ef800, eth%d e100: eth0: Intel(R) PRO/100 S Server Adapter Hardware receive checksums enabled Intel(R) PRO/1000 Network Driver - version 4.4.19-k1 Copyright (c) 1999-2002 Intel Corporation. device class 'input': registering NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Sending DHCP requests ., OK IP-Config: Got DHCP answer from 10.0.0.1, my address is 10.0.0.101 IP-Config: Complete: device=eth0, addr=10.0.0.101, mask=255.255.0.0, gw=10.0.0.1, host=hal1.office, domain=office, nis-domain=(none), bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath=/eboot/slash/hal.office NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 10.0.0.1 Looking up port of RPC 100005/1 on 10.0.0.1 VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 312k freed e100: eth0 NIC Link is Up 100 Mbps Full duplex --------------060604030803020205010200-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/