Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 12 Jan 2003 08:19:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 12 Jan 2003 08:19:56 -0500 Received: from netlx010.civ.utwente.nl ([130.89.1.92]:13487 "EHLO netlx010.civ.utwente.nl") by vger.kernel.org with ESMTP id ; Sun, 12 Jan 2003 08:19:51 -0500 From: "=?iso-8859-1?Q?Philip_K.F._H=F6lzenspies?=" To: Cc: "'Pete Zaitcev'" , "'Shawn Starr'" , "'Bayard R. Coolidge'" Subject: Date: Sun, 12 Jan 2003 14:28:35 +0100 Message-ID: <000001c2ba3e$84695730$53a85982@tomwaits> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 X-UTwente-MailScanner: Found to be clean X-UTwente-MailScanner-SpamScore: s Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12579 Lines: 315 I do have the following line in my fstab file (Bayard): none /proc/bus/usb usbfs defaults 0 0 I believe usbdevfs is deprecated (although - should I use it when my hosthub is picked up by the OHCI driver in stead of the EHCI driver?). My full dmesg is attached below (Pete), I'ld say the relevant section is: usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 02:08.2 (0014 -> 0016) PCI: No IRQ known for interrupt pin C of device 02:08.2. Probably buggy MP table. hcd.c: Found HC with no IRQ. Check BIOS/PCI 02:08.2 setup! uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Enabling device 02:08.0 (0014 -> 0016) PCI: No IRQ known for interrupt pin A of device 02:08.0. Probably buggy MP table. usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! PCI: Enabling device 02:08.1 (0014 -> 0016) PCI: No IRQ known for interrupt pin B of device 02:08.1. Probably buggy MP table. usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers usb.c: registered new driver usblp printer.c: v0.11: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. Does anybody else with the A7M266-D have that "Probably buggy MP table." For the OHCI 'found device with no IRQ assigned' I don't really get it. I have all my PCI slots set to auto assign IRQ and I didn't reserve any IRQ for Legacy Devices, so that shouldn't be the problem. > I have this board, but the problem is the newer A7M266-D boards have the USB > 1.x pins removed. (Shawn) I don't know what would be considered a "newer" board, but mine is a 03/07/2002-ASUS-A7M266-D B.T.W. I use BIOS rev. 1005. Regards, Philip P.S. Would configuring the kernel with >1GB mem support remove that " Warning only 896MB will be used." from my dmesg? Linux version 2.4.20 (root@tomwaits) (gcc version 3.2) #1 SMP Sat Jan 11 18:46:51 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffec000 (usable) BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data) BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f6d10 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 16 Processor #1 Pentium(tm) Pro APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Kernel command line: BOOT_IMAGE=lfs ro root=305 Initializing CPU#0 Detected 1533.431 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3060.53 BogoMIPS Memory: 904324k/917504k available (1707k kernel code, 12792k reserved, 604k data, 124k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(TM) MP 1800+ stepping 02 per-CPU timeslice cutoff: 731.39 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3060.53 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(TM) MP 1800+ stepping 02 Total of 2 processors activated (6121.06 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 003 03 0 0 0 0 0 1 1 71 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 10 003 03 1 1 0 1 0 1 1 89 11 000 00 1 0 0 0 0 0 0 00 12 003 03 1 1 0 1 0 1 1 91 13 003 03 1 1 0 1 0 1 1 99 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1533.4929 MHz. ..... host bus clock speed is 266.6942 MHz. cpu: 0, clocks: 2666942, slice: 888980 CPU0 cpu: 1, clocks: 2666942, slice: 888980 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xf0de0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router AMD768 [1022/7443] at 00:07.3 PCI->APIC IRQ transform: (B1,I5,P0) -> 16 PCI->APIC IRQ transform: (B2,I5,P0) -> 18 BIOS failed to enable PCI standards compliance, fixing this error. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver v1.1.22 [Flags: R/O] pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A amd768_rng: AMD768 system management I/O registers at 0xE400. amd768_rng hardware driver 0.1.0 loaded Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller on PCI bus 00 dev 39 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD7441: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD800JB-00CRA1, ATA DISK drive hdb: WDC WD307AA-00BAA0, ATA DISK drive hdc: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive hdd: AOPEN CD-RW CRW3248 1.10 20020301, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c03b9124, I/O limit 4095Mb (mask 0xffffffff) hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(100) blk: queue c03b9270, I/O limit 4095Mb (mask 0xffffffff) hdb: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=3739/255/63, UDMA(66) hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) Partition check: hda: hda1 hda2 < hda5 > hdb: hdb1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:05.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xc800. Vers LK1.1.16 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Detected AMD 760MP chipset agpgart: AGP aperture is 32M @ 0xfc000000 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 es1371: version v0.30 time 18:48:06 Jan 11 2003 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 02:08.2 (0014 -> 0016) PCI: No IRQ known for interrupt pin C of device 02:08.2. Probably buggy MP table. hcd.c: Found HC with no IRQ. Check BIOS/PCI 02:08.2 setup! uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Enabling device 02:08.0 (0014 -> 0016) PCI: No IRQ known for interrupt pin A of device 02:08.0. Probably buggy MP table. usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! PCI: Enabling device 02:08.1 (0014 -> 0016) PCI: No IRQ known for interrupt pin B of device 02:08.1. Probably buggy MP table. usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers usb.c: registered new driver usblp printer.c: v0.11: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 124k freed - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/