Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 12 Jan 2003 12:46:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 12 Jan 2003 12:46:49 -0500 Received: from CPE3236333432363339.cpe.net.cable.rogers.com ([24.114.185.204]:2052 "HELO coredump.sh0n.net") by vger.kernel.org with SMTP id convert rfc822-to-8bit; Sun, 12 Jan 2003 12:46:45 -0500 From: Shawn Starr Organization: sh0n.net To: "Philip K.F. =?iso-8859-1?q?H=F6lzenspies?=" , Subject: Re: Date: Sun, 12 Jan 2003 12:57:27 -0500 User-Agent: KMail/1.6 Cc: "'Pete Zaitcev'" , "'Bayard R. Coolidge'" References: <000001c2ba3e$84695730$53a85982@tomwaits> In-Reply-To: <000001c2ba3e$84695730$53a85982@tomwaits> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Message-Id: <200301121257.27953.spstarr@sh0n.net> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13278 Lines: 320 Same bug I get with 2.4.20 :-( On Sunday 12 January 2003 8:28 am, Philip K.F. H?lzenspies wrote: > I do have the following line in my fstab file (Bayard): > > none /proc/bus/usb usbfs defaults 0 0 > > I believe usbdevfs is deprecated (although - should I use it when my > hosthub is picked up by the OHCI driver in stead of the EHCI driver?). > > My full dmesg is attached below (Pete), I'ld say the relevant section > is: > > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > PCI: Enabling device 02:08.2 (0014 -> 0016) > PCI: No IRQ known for interrupt pin C of device 02:08.2. Probably buggy > MP table. > hcd.c: Found HC with no IRQ. Check BIOS/PCI 02:08.2 setup! > uhci.c: USB Universal Host Controller Interface driver v1.1 > PCI: Enabling device 02:08.0 (0014 -> 0016) > PCI: No IRQ known for interrupt pin A of device 02:08.0. Probably buggy > MP table. > usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! > PCI: Enabling device 02:08.1 (0014 -> 0016) > PCI: No IRQ known for interrupt pin B of device 02:08.1. Probably buggy > MP table. > usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! > usb.c: registered new driver hiddev > usb.c: registered new driver hid > hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik > hid-core.c: USB HID support drivers > usb.c: registered new driver usblp > printer.c: v0.11: USB Printer Device Class driver > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > USB Mass Storage support registered. > > Does anybody else with the A7M266-D have that "Probably buggy MP table." > > For the OHCI 'found device with no IRQ assigned' I don't really get it. > I have all my PCI slots set to auto assign IRQ and I didn't reserve any > IRQ for Legacy Devices, so that shouldn't be the problem. > > > I have this board, but the problem is the newer A7M266-D boards have > > the USB > > > 1.x pins removed. > > (Shawn) > > I don't know what would be considered a "newer" board, but mine is a > 03/07/2002-ASUS-A7M266-D > > B.T.W. > I use BIOS rev. 1005. > > Regards, > > Philip > > P.S. > Would configuring the kernel with >1GB mem support remove that > " Warning only 896MB will be used." from my dmesg? > > > > Linux version 2.4.20 (root@tomwaits) (gcc version 3.2) #1 SMP Sat Jan 11 > 18:46:51 CET 2003 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ffec000 (usable) > BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data) > BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved) > BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > Warning only 896MB will be used. > Use a HIGHMEM enabled kernel. > 896MB LOWMEM available. > found SMP MP-table at 000f6d10 > hm, page 000f6000 reserved twice. > hm, page 000f7000 reserved twice. > hm, page 000f6000 reserved twice. > hm, page 000f7000 reserved twice. > On node 0 totalpages: 229376 > zone(0): 4096 pages. > zone(1): 225280 pages. > zone(2): 0 pages. > Intel MultiProcessor Specification v1.4 > Virtual Wire compatibility mode. > OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 > Processor #0 Pentium(tm) Pro APIC version 16 > Processor #1 Pentium(tm) Pro APIC version 16 > I/O APIC #2 Version 17 at 0xFEC00000. > Processors: 2 > Kernel command line: BOOT_IMAGE=lfs ro root=305 > Initializing CPU#0 > Detected 1533.431 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 3060.53 BogoMIPS > Memory: 904324k/917504k available (1707k kernel code, 12792k reserved, > 604k data, 124k init, 0k highmem) > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode cache hash table entries: 65536 (order: 7, 524288 bytes) > Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) > Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) > Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > mtrr: detected mtrr type: Intel > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 > CPU0: AMD Athlon(TM) MP 1800+ stepping 02 > per-CPU timeslice cutoff: 731.39 usecs. > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Booting processor 1/1 eip 2000 > Initializing CPU#1 > masked ExtINT on CPU#1 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Calibrating delay loop... 3060.53 BogoMIPS > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > Intel machine check reporting enabled on CPU#1. > CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 > CPU1: AMD Athlon(TM) MP 1800+ stepping 02 > Total of 2 processors activated (6121.06 BogoMIPS). > ENABLING IO-APIC IRQs > Setting 2 in the phys_id_present_map > ...changing IO-APIC physical APIC ID to 2 ... ok. > init IO_APIC IRQs > IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, > 2-23 not connected. > ..TIMER: vector=0x31 pin1=2 pin2=0 > number of MP IRQ sources: 16. > number of IO-APIC #2 registers: 24. > testing the IO APIC....................... > > IO APIC #2...... > .... register #00: 02000000 > ....... : physical APIC id: 02 > .... register #01: 00170011 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 0 > ....... : IO APIC version: 0011 > .... register #02: 00000000 > ....... : arbitration: 00 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 000 00 1 0 0 0 0 0 0 00 > 01 003 03 0 0 0 0 0 1 1 39 > 02 003 03 0 0 0 0 0 1 1 31 > 03 003 03 0 0 0 0 0 1 1 41 > 04 003 03 0 0 0 0 0 1 1 49 > 05 000 00 1 0 0 0 0 0 0 00 > 06 003 03 0 0 0 0 0 1 1 51 > 07 003 03 0 0 0 0 0 1 1 59 > 08 003 03 0 0 0 0 0 1 1 61 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 003 03 0 0 0 0 0 1 1 69 > 0d 003 03 0 0 0 0 0 1 1 71 > 0e 003 03 0 0 0 0 0 1 1 79 > 0f 003 03 0 0 0 0 0 1 1 81 > 10 003 03 1 1 0 1 0 1 1 89 > 11 000 00 1 0 0 0 0 0 0 00 > 12 003 03 1 1 0 1 0 1 1 91 > 13 003 03 1 1 0 1 0 1 1 99 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IRQ to pin mappings: > IRQ0 -> 0:2 > IRQ1 -> 0:1 > IRQ3 -> 0:3 > IRQ4 -> 0:4 > IRQ6 -> 0:6 > IRQ7 -> 0:7 > IRQ8 -> 0:8 > IRQ12 -> 0:12 > IRQ13 -> 0:13 > IRQ14 -> 0:14 > IRQ15 -> 0:15 > IRQ16 -> 0:16 > IRQ18 -> 0:18 > IRQ19 -> 0:19 > .................................... done. > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 1533.4929 MHz. > ..... host bus clock speed is 266.6942 MHz. > cpu: 0, clocks: 2666942, slice: 888980 > CPU0 > cpu: 1, clocks: 2666942, slice: 888980 > CPU1 > checking TSC synchronization across CPUs: passed. > Waiting on wait_init_idle (map = 0x2) > All processors have done init_idle > mtrr: your CPUs had inconsistent fixed MTRR settings > mtrr: probably your BIOS does not setup all CPUs > PCI: PCI BIOS revision 2.10 entry at 0xf0de0, last bus=2 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > PCI: Using IRQ router AMD768 [1022/7443] at 00:07.3 > PCI->APIC IRQ transform: (B1,I5,P0) -> 16 > PCI->APIC IRQ transform: (B2,I5,P0) -> 18 > BIOS failed to enable PCI standards compliance, fixing this error. > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > NTFS driver v1.1.22 [Flags: R/O] > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ > SERIAL_PCI enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > amd768_rng: AMD768 system management I/O registers at 0xE400. > amd768_rng hardware driver 0.1.0 loaded > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > AMD7441: IDE controller on PCI bus 00 dev 39 > AMD7441: chipset revision 4 > AMD7441: not 100% native mode: will probe irqs later > AMD7441: disabling single-word DMA support (revision < C4) > ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA > hda: WDC WD800JB-00CRA1, ATA DISK drive > hdb: WDC WD307AA-00BAA0, ATA DISK drive > hdc: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive > hdd: AOPEN CD-RW CRW3248 1.10 20020301, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > blk: queue c03b9124, I/O limit 4095Mb (mask 0xffffffff) > hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, > UDMA(100) > blk: queue c03b9270, I/O limit 4095Mb (mask 0xffffffff) > hdb: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=3739/255/63, > UDMA(66) > hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.12 > hdd: ATAPI 48X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) > Partition check: > hda: hda1 hda2 < hda5 > > hdb: hdb1 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > loop: loaded (max 8 devices) > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html > 02:05.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xc800. Vers > LK1.1.16 > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 816M > agpgart: Detected AMD 760MP chipset > agpgart: AGP aperture is 32M @ 0xfc000000 > SCSI subsystem driver Revision: 1.00 > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > es1371: version v0.30 time 18:48:06 Jan 11 2003 > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > PCI: Enabling device 02:08.2 (0014 -> 0016) > PCI: No IRQ known for interrupt pin C of device 02:08.2. Probably buggy > MP table. > hcd.c: Found HC with no IRQ. Check BIOS/PCI 02:08.2 setup! > uhci.c: USB Universal Host Controller Interface driver v1.1 > PCI: Enabling device 02:08.0 (0014 -> 0016) > PCI: No IRQ known for interrupt pin A of device 02:08.0. Probably buggy > MP table. > usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! > PCI: Enabling device 02:08.1 (0014 -> 0016) > PCI: No IRQ known for interrupt pin B of device 02:08.1. Probably buggy > MP table. > usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings! > usb.c: registered new driver hiddev > usb.c: registered new driver hid > hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik > hid-core.c: USB HID support drivers > usb.c: registered new driver usblp > printer.c: v0.11: USB Printer Device Class driver > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > USB Mass Storage support registered. > mice: PS/2 mouse device common for all mice > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 8192 buckets, 64Kbytes > TCP: Hash tables configured (established 262144 bind 65536) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 124k freed - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/