Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757030AbbDPJlc (ORCPT ); Thu, 16 Apr 2015 05:41:32 -0400 Received: from down.free-electrons.com ([37.187.137.238]:54036 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756997AbbDPJlX (ORCPT ); Thu, 16 Apr 2015 05:41:23 -0400 Date: Thu, 16 Apr 2015 11:41:19 +0200 From: Alexandre Belloni To: =?iso-8859-1?Q?Ga=EBl?= PORTAY Cc: Nicolas Ferre , Boris Brezillon , Jean-Christophe PLAGNIOL-VILLARD , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v3 2/2] ARM: at91/dt: add support for kizboxmini Message-ID: <20150416094119.GC29796@piout.net> References: <1428929774-8951-1-git-send-email-g.portay@overkiz.com> <1428929774-8951-3-git-send-email-g.portay@overkiz.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1428929774-8951-3-git-send-email-g.portay@overkiz.com> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4067 Lines: 173 On 13/04/2015 at 14:56:14 +0200, Ga?l PORTAY wrote : > Add DT file for Kizbox mini board. > This board is based on Atmel's AT91SAM9G25 SoC. > > Signed-off-by: Ga?l PORTAY Acked-by: Alexandre Belloni > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++ > 2 files changed, 130 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index a1c776b..9c11888 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ > at91sam9rlek.dtb \ > at91-ariag25.dtb \ > at91-cosino_mega2560.dtb \ > + at91-kizboxmini.dtb \ > at91sam9g15ek.dtb \ > at91sam9g25ek.dtb \ > at91sam9g35ek.dtb \ > diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts > new file mode 100644 > index 0000000..19b0ded > --- /dev/null > +++ b/arch/arm/boot/dts/at91-kizboxmini.dts > @@ -0,0 +1,129 @@ > +/* > + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board > + * > + * Copyright (C) 2014 Ga?l PORTAY > + * > + * Licensed under GPLv2 or later. > + */ > +/dts-v1/; > +#include "at91sam9g25.dtsi" > +#include "at91sam9x5.dtsi" > +#include > + > +/ { > + model = "Overkiz Kizbox mini"; > + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; > + > + chosen { > + bootargs = "ubi.mtd=ubi"; > + linux,stdout-path = &dbgu; > + }; > + > + memory { > + reg = <0x20000000 0x8000000>; > + }; > + > + clocks { > + slow_xtal { > + clock-frequency = <32768>; > + }; > + > + main_xtal { > + clock-frequency = <12000000>; > + }; > + }; > + > + ahb { > + apb { > + usart0: serial@f801c000 { > + status = "okay"; > + }; > + > + macb0: ethernet@f802c000 { > + phy-mode = "rmii"; > + status = "okay"; > + }; > + > + pwm0: pwm@f8034000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 > + &pinctrl_pwm0_pwm1_1>; > + status = "okay"; > + }; > + > + dbgu: serial@fffff200 { > + status = "okay"; > + }; > + > + watchdog@fffffe40 { > + status = "okay"; > + }; > + }; > + > + usb0: ohci@00600000 { > + status = "okay"; > + }; > + > + usb1: ehci@00700000 { > + status = "okay"; > + }; > + > + nand0: nand@40000000 { > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + atmel,has-pmecc; > + atmel,pmecc-cap = <4>; > + atmel,pmecc-sector-size = <512>; > + nand-on-flash-bbt; > + status = "okay"; > + > + bootstrap@0 { > + label = "bootstrap"; > + reg = <0x0 0x20000>; > + }; > + > + ubi@20000 { > + label = "ubi"; > + reg = <0x20000 0x7fe0000>; > + }; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + prog { > + label = "PB_PROG"; > + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; > + linux,code = <0x102>; > + gpio-key,wakeup; > + }; > + > + reset { > + label = "PB_RST"; > + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; > + linux,code = <0x100>; > + gpio-key,wakeup; > + }; > + }; > + > + pwm_leds { > + compatible = "pwm-leds"; > + > + green { > + label = "pwm:green:user"; > + pwms = <&pwm0 0 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + > + red { > + label = "pwm:red:user"; > + pwms = <&pwm0 1 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + }; > +}; > -- > 1.9.1 > -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/