Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966399AbbDQO1b (ORCPT ); Fri, 17 Apr 2015 10:27:31 -0400 Received: from smtp2-g21.free.fr ([212.27.42.2]:30351 "EHLO smtp2-g21.free.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754300AbbDQO10 (ORCPT ); Fri, 17 Apr 2015 10:27:26 -0400 From: Alban Bedel To: linux-mips@linux-mips.org Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Thomas Gleixner , Jason Cooper , Ralf Baechle , Alban Bedel , Andrew Bresticker , Qais Yousef , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 10/14] devicetree: Add bindings for the ATH79 GPIO controllers Date: Fri, 17 Apr 2015 16:24:25 +0200 Message-Id: <1429280669-2986-11-git-send-email-albeu@free.fr> X-Mailer: git-send-email 2.0.0 In-Reply-To: <1429280669-2986-1-git-send-email-albeu@free.fr> References: <1429280669-2986-1-git-send-email-albeu@free.fr> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2136 Lines: 63 These bindings support the GPIO controllers found on the Qualcomm Atheros AR7xxx/AR9XXX SoC. Signed-off-by: Alban Bedel --- .../devicetree/bindings/gpio/gpio-ath79.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt new file mode 100644 index 0000000..663c0b6 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt @@ -0,0 +1,40 @@ +Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller + +Required properties: +- compatible: has to be "qca,-gpio" and one of the following + fallback: + - "qca,ar7100-gpio" + - "qca,ar7240-gpio" + - "qca,ar7241-gpio" + - "qca,ar9130-gpio" + - "qca,ar9330-gpio" + - "qca,ar9340-gpio" + - "qca,qca9550-gpio" +- reg: Base address and size of the controllers memory area +- gpio-controller : Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters. + +Optional properties: +- interrupt-parent: phandle of the parent interrupt controller. +- interrupts: Interrupt specifier for the controllers interrupt. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 2 + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + + gpio@18040000 { + compatible = "qca,ar9132-gpio", "qca,ar9130-gpio"; + reg = <0x18040000 0x30>; + interrupts = <2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/