Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752500AbbDSNmj (ORCPT ); Sun, 19 Apr 2015 09:42:39 -0400 Received: from smtp1-g21.free.fr ([212.27.42.1]:26266 "EHLO smtp1-g21.free.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750946AbbDSNmh (ORCPT ); Sun, 19 Apr 2015 09:42:37 -0400 From: Alban Bedel To: linux-mips@linux-mips.org Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Thomas Gleixner , Jason Cooper , Ralf Baechle , Alban Bedel , Andrew Bresticker , Qais Yousef , Gabor Juhos , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 09/12] devicetree: Add bindings for the ATH79 GPIO controllers Date: Sun, 19 Apr 2015 15:42:13 +0200 Message-Id: <1429450936-21642-1-git-send-email-albeu@free.fr> X-Mailer: git-send-email 2.0.0 In-Reply-To: <1429448288-20742-1-git-send-email-albeu@free.fr> References: <1429448288-20742-1-git-send-email-albeu@free.fr> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2185 Lines: 63 These bindings support the GPIO controllers found on the Qualcomm Atheros AR7xxx/AR9XXX SoC. Signed-off-by: Alban Bedel --- v2: * Add the ngpios property to have fewer fallbacks and simpler code --- .../devicetree/bindings/gpio/gpio-ath79.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt new file mode 100644 index 0000000..e027864 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt @@ -0,0 +1,38 @@ +Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller + +Required properties: +- compatible: has to be "qca,-gpio" and one of the following + fallback: + - "qca,ar7100-gpio" + - "qca,ar9340-gpio" +- reg: Base address and size of the controllers memory area +- gpio-controller : Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters. +- ngpios: Should be set to the number of GPIOs available on the SoC. + +Optional properties: +- interrupt-parent: phandle of the parent interrupt controller. +- interrupts: Interrupt specifier for the controllers interrupt. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 2 + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + + gpio@18040000 { + compatible = "qca,ar9132-gpio", "qca,ar9130-gpio"; + reg = <0x18040000 0x30>; + interrupts = <2>; + + ngpios = <22>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/